MICROTECH 120139908 Tablet Wireless Plunger Indicator User Manual

MICROTECH

SUB-MICRON TABLET COMPUTERIZED INDICATOR

USER MANUAL

     
ISO17025:2017      ISO 9001:2015

www.microtech.ua

SPECIFICATION

Item No	Range		Resolution	Accuracy	Hysteresis	Force	Protection	Display	Data output
	mm	inch	mm	μm	μm	N
120139135	0-12,5	0-0,5”	0,0001	±3,0	0,5	0,6-1	IP54	Color 2,4” touchscreen	WIRELESS+USB
120139137				±2,0			IP54
120139138				±1,6			IP54
120139139				±1,2			IP54
120139257	0-25,4	0-1”		±3,0		0.7-1.2	IP54
120139258				±2,0			IP54
120139259				±1,6			IP54
120139508	0-50,8	0-2”		±3,0		1,2-2,2	IP54
120139509				±2,2			IP54
120139907	0-100	0-4”		±5,0		3.2-5.2	IP54
120139908				±3,5			IP54

TECHNICAL DATA

Parameters
LED display	color 2,4 inch 320×240
Indication system	MICS 4.0
Power supply	Rechargeable Li-Pol battery 500 mAh
Charging port	micro-USB
Case material	Aluminium
Wireless data transfer	Long range / HID
USB data transfer	USB HID

MAIN INFO

1. SWITCH ON DEVICE – button push (1 sec)
   SWITCH OFF DEVICE – button push (3 sec)/ auto switch off
   DATA TRANSFER – programming throw menu
2. BUILT-IN BATTERY – rechargeable Li-Pol battery

DOWNLOAD APP

   

DOWNLOAD MDS APP FOR MICROTECH DEVICES WIRELESS CONNECTION FROM www.microtech.ua, Google Play & App Store

DATA TRANSFER

3 MODES OF DATA TRANSFER (USB + 2 WIRELESS MODES)

WIRELESS CONNECTION TO MDS APP

WIRELESS data transfer to MICROTECH MDS app for Windows, Android, iOS

FREE SOFTWARE

NO DONGLE

SAVING DATA TO XLS. CSV FORMATS

TRANSFER DATA TO CAD, SPC OR OTHER SOFTWARE

TRANSFER DATA TO EXCEL OR OTHER TABLE EDITORS

SAVING GRAPH

WIRELESS HID CONNECTION
USB HID CONNECTION

NO DONGLE

WIRELESS HID and USB HID data transfer (like keyboard) direct to any customers app and system

TRANSFER DATA TO CAD, SPC OR OTHER SOFTWARE

TRANSFER DATA TO EXCEL OR OTHER TABLE EDITORS

TRANSFER DATA TO ANY BROWSWE OR APP

7 WAYS HOW TO TRANSFER DATA TO PC OR TABLET

1. TOUCHSCREEN TAP
2. BUTTON PUSH
3. SELECTED FORCE
4. BY TIMER
5. FROM MEMORY
6. IN MDS APP
7. FROM PAIRED DEVICE

MAIN SCREEN

1. LAST VALUE
2. ON-LINE GRAPHIC MODE
3. CONNECTION STATUS
   a: WIRELESS DISCONNECTED
   b: WIRELESS CONNECTED
   c: WIRELESS HID CONNECTED
   d: USB HID DISCONNECTED
   e: USB HID CONNECTED
4. ANALOG SCALE
5. MEMORY
   STANDARD or FOLDER system can be activated throw MEMORY menu
6. FOLDERS SYSTEM
7. MEMORY 2000 val.
8. MEMORY EXPORT
9. STATISTIC

[A]: For save measuring data to internal device memory touch data area on screen or button push. You can view saved data or send by WIRELESS or USB connection to Windows PC, Android or iOS It’s possible to use Standard or Folders memory modes

MAIN SCREEN on 2D mode

1. ANALOG SCALE FOR PROBE MODE
2. ON-LINE GRAPHIC MODE
3. 2D and HUB mode
PROBE -Saving data when Probe will reach value
PROBE Auto – Saving data when Probe will reach value with this value compensation
2D – 2 axis data reading
2D Sync– Synchronized2 axis data reading

FUNCTIONS

LIMITS mode GO/NOGO

COLOR INDICATION LIMITS ON MAIN SCREEN Go NoGo

1. MAX – NoGo more Upper limit
   MIN – NoGo less Lower limit
   RANGE – Go between Limits
   SCALE – Analog scale active
2. Upper limit
3. Lower limit
4. Yellow zone on analog scale

PEAK mode MAX/MIN/MODULE/RANGE

1. DISABLE– non active mode
   ENABLE – activating mode
   REFRESH – refresh peal value according timer
2. MAX – indicating MAX measured value
   MIN – indicating MIN measured value
   MODULE – indicating MAX module
   RANGE – indicating deviation between MAX and MIN

TIMER mode

SAVING DATA TO MEMORY OR SENDING WIRELESS/USB BY TIMER

1. Select timer period
2. Reset to disactivate mode

FORMULA mode

1. Select FORMULA Type (Math, Radius or other)
2. Select arguments

RESOLUTION selection

1. Resolution selecting
2. mm/inch conversion

DISPLAY settings

1. Sleep OFF (15 s low brightness off, sleep off)
   Sleep 15s (15 s low brightness on, sleep off)
   Sleep ON (15 s low brightness on, sleep on)
2. Display rotation 0°, 90°, 180°, 270°
3. Brightness level

LINEAR error compensation

Re-calculation detail size to calibration conditions (20°C)

1. actual values
2. correct values by up & down button
3. confirm point correction

TEMP compensation

   

1. Manual Temperature setting
2. 4 types of material for selection:
   – Glass, Quartz
   – Stainless steel
   – Cuprum and alloys
   – Alluminium and alloys

WIRELESS data transfer

   

1. Recconection button
2. Wireless power regulation
3. ON – WIRELESS data transfer to MDS App for Android, iOS, Windows
   HID – WIRELESS HID direct transfer data to any App in Windows,
   MacOS, Linux, Android devices (like keyboard). Configure data format in USB sub-menu
   2D-S – Slave device on WIRELESS connection on HUB mode
   2D-M – Master device on WIRELESS connection on HUB mode

USB OTG data transfer

   

1. Connect USB cable to PC & Activate USB HID connection mode
   Select setting of data transfer
   Direct transfer data to any App in Windows, MacOS, Linux, Android devices
   Configurating data transfer Dot/Comma and Tab/Arrow Down/CR+LF

HUB connection

PROBE MODE

1. A.C. on – Auto Connection active
   A.C. off – Auto Connection no active
2. PROBE -Saving data when Probe will reach value
   PROBE Auto – Saving data when Probe will reach value with this value compensation
   2D – 2 axis data reading
   2D Sync– Synchronized2 axis data reading
   Disable – switch off modes
3. Setting PROBE limit value
4. Axis priority selecting
5. External Wireless device connection

2D MODE

1. A.C. on – Auto Connection active
   A.C. off – Auto Connection no active
2. PROBE -Saving data when Probe will reach value
   PROBE Auto – Saving data when Probe will reach value with this value compensation
   2D – 2 axis data reading
   2D Sync – Synchronized2 axis data reading
   Disable – switch off modes
3. External Wireless device connection
4. Symbol between Axis
5. Graphic mode indication setting

LINK to app’s

 

QR Link to MICROTECH web site page with MDS Software download
– Android, iOS, Windows versions
– Free and Pro versions
– Manuals

   

RESET to Factory settings

1. Push 10 times to RESET device to factory settings
2. Push 10 times to FIRMWARE UPDATE

EXTRA

1. Selecting normal or inverted axis mode (+/- value indication)
2. Сoefficient setting (for distributor and calibration only)

MEMORY manager setting

1. Values in each Folder

Activating STANDARD or FOLDER SYSTEM

FOLDERS SYSTEM

CALIBRATION date info

1. Push for change calibration date info

Device INFO

Information about device
– Firmware version
– MAC address for WIRELESS connection

INDUSTRY 4.0 INSTRUMENTS

FORCE CONTROL
1-20N

Change without prior notice

MICROTECH
innovative measuring instruments

61001, Kharkiv, Ukraine, str. Rustaveli, 39

tel.: +38 (057) 739-03-50
www.microtech.ua
tool@microtech.ua

Documents / Resources

MICROTECH 120139908 Tablet Wireless Plunger Indicator [pdf] User Manual 120139135, 120139137, 120139138, 120139139, 120139257, 120139258, 120139259, 120139508, 120139509, 120139907, 120139908, 120139908 Tablet Wireless Plunger Indicator, 120139908, Tablet Wireless Plunger Indicator, Wireless Plunger Indicator, Plunger Indicator

References

• User Manual