microSHIFT CS001-004 Speed Drop Bar Shifters Instructions

Before installing the products, please read and understand the installation procedures. Improper installation can lead to premature product failures or even injuries. If you have any questions on how to install, please contact us or consult with a professional bicycle mechanic.

Tools and Supplies

Large sized wrench or torque wrench

Cassette lockring tool
Grease

Chain whip

Freehub Body Requirements

Standard 8 / 9 / 10 Speed Freehub Body

All microSHIFT MTB (8, 9, 10, 11 speed) cassettes and (8, 9, 10 speed) road cassettes fit directly on a standard 8/9/10 speed HG freehub body (length 34.90 mm).

Road 11-Speed Freehub Body

To install 11-speed road cassettes on the newer 11-speed road HG freehub body (length 36.75 mm), install the cassette directly. No spacer is needed.

To fit MTB microSHIFT (8, 9, 10, 11 speed) cassettes and (8, 9, 10 speed) road cassettes, add a 1.85mm spacer before installing the cassette.

H-series vs. G-series Cassettes

Cassette Installation

11-Speed Road Freehub Body Only
To install the 8, 9, 10 speed cassette on the wider Il-speed road freehub body, slot in a 1.85 mm cassette spacer before you install the cassette.

Align the small spline on the freehub body with the small spline recess on each cassette component, then slide on each component in order as shown in the Installation Order section of this manual.

Lockring Installation

Check for Cassette Free Play
There should be no free play in the cassette cogs after the lock ring is tightened.
If there is play, double check the Installation Order of the cassette.
Make sure the correct spacers and cassette components are installed.

Loosening the Lockring

Cassette Removal

Once the lock ring is removed, pull the cassette away from the hub.

Installation Order Index

11-Speed (Standard HG Freehub)

10-Speed (Standard HG Freehub)

9-Speed (Standard HG Freehub)

8-Speed (Standard HG Freehub)

7-Speed (Standard HG Freehub)

11-Speed (Road Il-Speed HG Freehub)

A These cassettes are not compatible with standard HG freehubs

11-Speed (Road 11 •Speed HG Freehub)

A These cassettes are not compatible with standard HG freehubs

10-Speed (Road 11 Speed HG Freehub)

9-Speed (Road 11 Speed HG Freehub)

8-Speed (Road Il-Speed HG Freehub)

7-Speed (Road Il-Speed HG Freehub)

Read More About This Manual & Download PDF:

Documents / Resources

microSHIFT CS001-004 Speed Drop Bar Shifters [pdf] Instructions
CS001-004 Speed Drop Bar Shifters, CS001-004, Speed Drop Bar Shifters, Drop Bar Shifters, Bar Shifters, Shifters

References

User Manual