Wireless Mouse
User Manual
Model: MD490
Packing Content
1* Mouse
1* USB-A receiver ( For 2.4G connection only )
1* Cable
1* User manual
Specification
| Connected by | USB Wired+2.4G+BT1+BT2 |
| Dimensions | 118.3*82.5*78.7mm |
| Operating distance | ＜8 m / 26.2 ft |
| Rechargeable lithium battery | 800mAh |
| DPI | 800-1200-1600-2400-3200-4000(Default 1600). The USB wired and 2.4G channel can be customized (via APP settings). |
| APP Browser compatibility | Google Chrome/ Microsoft Edge(Chromium)/Opera(Chromium)/ Brave(Chromium)/Chrome OS (Chromebook) |
| APP APP Browser Link |
Product Preview
- Left button
- Right button
- Fast scroll wheel
- DPI
- LED indicator
- 2.4G/ BT1/BT2 Connect Button
- Power indicator/Charging indicator/Low battery indicator
- Forward button
- Backward button
- Power Switch
12.Charging port
13. USB-A receiver inside
Mouse Pairing
A. USB wired
Step 1. Insert cable into the computer port.
Step 2. Plug and play.
B. 2.4Ghz Wireless Connection
Step 1.Turn on the power switch on the mouse
Step 2.Take out the USB-A receiver
USB USB
Step 3. Insert the USB-A receiver into the computer port. Plug and play.
C. Wireless Bluetooth Connection
Step 1. Turn on the mouse.
Step 2. Press the “Connect button” to switch Bluetooth channel
Step 3. Hold Press the “Connect button” for 5s to enter pairing mode.
Step 4. On your device, find the name of “MAM4 BT1/MAM4 BT2″and click to connect.
Sleep Mode
The mouse will enter sleep mode if idle for 1min.
Move the mouse to exit sleep mode.
Charging
Step 1. Connect one end of the included type-c cable to a USB charger, and connect the opposite end to the charging slot on the mouse.
(Note: Output: DC 5 V / 500mA; USB charger is not included)
Step 2. The charging indicator will glow red while the mouse is charging.
A full charge takes approximately 4 hours.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Documents / Resources
 | MD490 Wireless Mouse |
References
- User Manualmanual.tools