MICROCHIP FLASHPRO6 Device Programmer Instruction Manual
Kit Contents – FLASHPRO6
Hardware Installation
After installing the software successfully, connect one end of the USB cable to the FlashPro6 device programmer and the other end to the USB port of the PC. Use the wizard to install the driver utomatically cannot find the drivers automatically, then ensure you have properly installed the FlashPro software prior to installing the hardware.
Note: FlashPro6 does not use pin 4 and pin 7 of the JTAG connector, which is different from FlashPro4 and FlashPro5. For FlahsPro6, pin 4 and pin 7 of the JTAG header must not be connected.
Common Issues
If the On LED does not light up after FlashPro6 driver installation, the driver might not be installed correctly and you must troubleshoot the installation. For more information, see the FlashPro Software and Hardware Installation Guide and the “Known Issues and Workarounds” section of the FlashPro Software Release Notes.
Software and Licensing
Libero® SoC PolarFire Design Suite offers high productivity with its comprehensive, easy-to-learn, easy-to-adopt development tools for designing with Microsemi’s low power Flash FPGAs and SoC. The suite integrates industry standard Synopsys Synplify Pro® synthesis and Mentor Graphics ModelSim® simulation with best-in-class constraints management and debug capabilities.
Download the latest Libero SoC PolarFire release:
https://www.microsemi.com/product-directory/design-resources/1750-libero-soc#downloads
Documentation Resources
For more information about the FlashPro6 Device Programmer, see the documentation at https://www.microsemi.com/product-directory/programming/4977-flashpro#documents.
Support
Technical support is available online at https://soc.microsemi.com/Portal/Default.aspx.
Microsemi sales offices, including representatives and distributors are located worldwide. To find your local representative, go to www.microsemi.com/salescontacts
Microsemi Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 800-713-4113
Outside the USA: +1 949-380-6100
Sales: +1 949-380-6136
Fax: +1 949-215-4996
email: sales.support@microsemi.com
www.microsemi.com
Microsemi, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world’s standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Learn more at www.microsemi.com.
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.
©2019 Microsemi, a wholly owned subsidiary of Microchip Technology Inc. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi
Corporation. All other trademarks and service marks are the property of their respective owners.
Read More About This Manual & Download PDF:
Documents / Resources
 |
MICROCHIP FLASHPRO6 Device Programmer [pdf] Instruction Manual FLASHPRO6 Device Programmer, FLASHPRO6, Device Programmer, Programmer |
