MiCODUS ML910G GPS Tracker

Product Information

Main Features

• 4G LTE+2G Real-time Tracking Historical Route
• GSM Playback
• Superstrong Magnetic
• Waterproof IP65
• Movement Alarm
• Voice Monitor
• Overspeed Alarm
• Vibration Alarm
• Geo-fence
• Teardown Alarm
• Device Information
• Working Parameters
• Cellular Specifications
• GNSS Specifications

Specifications

• Model: ML910G/ML920G
• Weight: ML910G: 306g, ML920G: 467g
• Dimensions: ML910G: 115(L)*65(W)*31(H)mm, ML920G: 115(L)*65(W)*47(H)mm
• Battery: 3.7V 10000/20000mAh Li-Polymer Battery
• Battery Life:
  • ML910G: Real-time Tracking mode: 12-15 days; Power Saving Mode: around 30 days; Hibernate Mode: around 60 days
  • ML920G: Real-time Tracking mode: 25-30 days; Power Saving Mode: around 60 days; Hibernate Mode: around 120 days
• Working Humidity: 5% – 95% RH
• SIM Card: Normal Size
• Cellular Antenna: Built-in
• Working Frequency:
  • 4G LTE CAT1: LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66; LTE-TDD: B34/B38/B39/B40/B41 2G GSM/GPRS: 850/900/1800/1900MHz
• GNSS: GPS+GLONASS+BDS

Product Usage Instructions

Setting Up the MiCODUS Tracker

1. Insert a normal-sized SIM card into the device.
2. Charge the device using the provided charging cable.
3. Power on the device by pressing the power button for a few seconds.
4. Download the MiCODUS Tracker app from the app store on your smartphone.
5. Follow the app instructions to pair your device with the app.

Using the MiCODUS Tracker

1. To track real-time location, ensure the device is connected to a cellular network.
2. Set up geo-fences in the app to receive notifications when the tracker enters or exits specific areas.
3. To playback historical routes, access the playback feature in the app.
4. In case of overspeed or movement alarms, check the app for alerts.
5. To monitor voice or activate vibration alarms, use the corresponding features in the app.

Main Features

Specifications

Activate Device

First Step: Prepare And Install SIM Card

• If you use your local SIM card, please make sure the SIM card already has enabled SMS, internet data traffic, call, and caller ID displaying functions;
• If we use our spionlink SIM card, then please recharge it via this website www.spionlink.com to geta data plan firstly.

Second Step: Configure APN

• Please get the exact correct APN name from the local SIM card provider. Take the tracker to a good signal place for operation and configure the APN for it as below.
• Note: The APN information is very important, it must be 100% correct to match with the SIM card of the tracker, if you configured wrong, the tracker will also reply “SET APN ok” but it won’t get online!

Package Content

• ML910G or ML920G Tracker x 1
• USB Charging Cable x 1
• User Guide x 1
• Packing Box x 1

Functions Explanation

1. Voice Monitor
   • Set up a center number for the device: CENTER, A, CENTER NUMBER#
   • For example, if you want to set up this number as center number: + 8613366668888, the command should be sent like this:
   • CENTER, A,+8613366668888#
   • For example:
   • Note: Please put the country code as prefix with the center number!
   • Use the center number to set up a number for the tracker to call back: MONITOR, number for monitor#
   • For example, if you send this command:
   • MONITOR,+8613366668888#, then the tracker will make a call to this number +8613366668888 and this number can pick up the call to monitor the voice around it.
2. 2. Set Working Mode
   • Command format: MODE,A,T1,T2#
   • For example:
   • For example: Realtime Tracking Mode: MODE,1,10,3600#
     
   • This means the tracker will upload every 10 seconds when it is moving, and every 3600 seconds when it is static.
   • For example: Power Saving Mode: SET MODE OK MODE,2,0800,1#
   • This means the tracker will enter into power saving mode at 08:00 am and upload every 1 hour. If now is 09:00 am, then the tracker will enter power saving mode at 08:00 am of tomorrow.
   • For example: Hibernation Mode: MODE,3,0800,1#
   • This means the tracker will enter into power saving mode at 08:00am and upload every 1 hour.
   • Note: The difference between the mode 2 and mode 3 is that, under mode 2, the device can be woken up by sms, call, and light sensor, under mode 3, the device can be woken up by light sensor.
3. Vibration Alarm
   • Set up a center number for the device:
   • CENTER, A, CENTER NUMBER#
   • For example, if you want to set up this number as center number:+8613366668888, the command should be sent like this: CENTER,A,+8613366668888#
   • For example:
   • Note: Please put the country code as prefix with the center number!
   • Set up SOS contact numbers:
   • SOS,A,SOS1,SOS2,SOS3#
   • For example, SOS, A,+8613366667777, +8613366667778,+8613366667779#
   • Note: You can set up 3 SOS alarm numbers for the device at the same time
   • Set up the vibration alarm way: SENALM, ON,2#

Installation Recomendation

1. Driving seat sundries box
2. Front bumper
3. Driving sundries box
4. Under the chassis
5. Rear windscreen
6. Rear bumper

Trouble Shooting

Full SMS Commands List

Query Commands

Setting Commands

Alarm Setting Commands

After-sale Contact Information

• E-mail: support@micodus.com
• Skype: MiCODUS

Download APP

• Search “MiCODUS” in iOS APP store or Google Play Store, or just scan the QR code as below to download

MiCODUS APP:

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Frequently Asked Questions

• Q: How long does the battery last in different modes?
  • A: The battery life varies based on the tracking mode -Real-time Tracking mode, Power Saving Mode, and Hibernate Mode.
  • Refer to the specifications section for detailed battery life information.
• Q: Can I use any SIM card with the MiCODUS Tracker?
  • A: The MiCODUS Tracker requires a normal-sized SIM card for cellular connectivity.
• Q: How do I receive alerts for alarms?
  • A: Alerts for alarms such as overspeed, movement, and teardown can be received through the MiCODUS Tracker app on your smartphone.

Documents / Resources

MiCODUS ML910G GPS Tracker [pdf] User Manual ML910G GPS Tracker, ML910G, GPS Tracker, Tracker

References

• User Manual