TMS AQ-01 Tire Mounted Sensor
“
Specifications
- Product Type: Tire Mounted Sensor
- Product Model: TMS AQ-01
- Trademark: Michelin
Product Information
The TMS AQ-01 is an autonomous Bluetooth sensor designed for
monitoring temperature and pressure in tires. Please note that
features and specifications are subject to change without
notification. It is essential that the TMS AQ-01 is installed by a
qualified professional.
Manufacturer Information
Address: 63040 Clermont-Ferrand, France
Product Specification
- Operating Conditions: Measures Temperature and
Pressure - Battery Voltage: 3.2V
- Radio Frequency: Band: 2,400 MHz to 2,483.5
MHz, Power: up to +5dBm (3.16mW) - Battery: This marking indicates that the
product is powered by a direct current from a coin cell with a
maximum voltage of +3.2V.
Warning
Disposal of Waste Batteries: The product
complies with the DEEE/WEEE Directive (2012/19/UE French version,
2012/19/EU English version) on waste electrical and electronic
equipment. Do not dispose it with other household waste. Instead,
hand it over to the appropriate collection point for recycling.
Certificates
- Administration: OC/CB Scheme
- Certifications: CE, FCC/IC
- FCC ID: FI5TMSAP01
- IC: 5056ATMSAP01
Document Revision
Revision Number: 1
Author: Julien Guichon
Changes: Initial Release
Date: 29/10/2024
Product Usage Instructions
- Ensure the TMS AQ-01 is powered off before installation.
- Consult the user manual for proper installation instructions or
have it installed by a qualified professional. - Pair the sensor with your Bluetooth-enabled device following
the provided guidelines. - Monitor tire temperature and pressure readings through the
compatible app or software. - If any abnormalities are detected, seek assistance from a
certified technician for further inspection and maintenance.
Frequently Asked Questions (FAQ)
Q: Can the TMS AQ-01 be used on all types of vehicles?
A: The TMS AQ-01 is suitable for most vehicles, but it’s
recommended to check compatibility with your specific vehicle model
before installation.
Q: How often should I check the battery level of the TMS
AQ-01?
A: It’s advisable to monitor the battery level regularly and
replace it when necessary to ensure uninterrupted operation of the
sensor.
“`
TMS AQ-01 User manual
1
Product information
Product type:
Tire Mounted Sensor
Product model: Trademark:
TMS AQ-01 Michelin
The TMS AQ-01 is an autonomous bluetooth sensor. The features and specifications are subject to change without notification. The TMS AQ-01 must be installed by a qualified professional.
Manufacturer information
Manufacturer name: Manufacture Française des Pneumatiques Michelin
Address:
23 Place des Carmes Déchaux
63040 Clermont-Ferrand
France
Product Specification
Operating Conditions
The TMS AQ-01 must not be used in operating conditions different than those listed below: Temperature: -40°C to 125°C (-40°F to 257°F) Pressure: up to 14 Bar (203 PSI) above atmospheric pressure Altitude: up to 10,000m (32,000 ft) above sea level
Measures
Type Temperature Pressure
Accuracy +/- 6°C between -40°C < T < 125°C +/- 17kPa between -40°C < T < 125°C
Range -40°C to +125°C 100 kPa to 1400 kPa (absolute)
Battery voltage
+/- 300mV between -40°C < T < 125°C 1.9V to 3.2V
Radio frequency
Band: 2,400 MHz to 2,483.5 MHz Power: up to +5dBm (3.16mW)
Battery
3.2V
This marking indicates that the product is powered by a direct current
from a coin cell with a maximum voltage of +3.2V.
2
Warning
The TMS AQ-01 is powered by an internal battery. This battery cannot be replaced. The TMS AQ-01 must not be installed in an explosive environment. Check the TMS AQ-01 casing for any damage before installing it and do not use the TMS AQ-01 if it is damaged. Do not disassemble or attempt to service the TMS AQ-01. Do not heat the TMS AQ-01 above 125°C (257°F). Disposing a battery into fire or a hot oven mechanically crushing or cutting a battery can result in an explosion. Leaving a battery in an extremely high temperature surrounding, or an extremely low air pressure environment may result in an explosion or leakage of flammable liquid or gas.
Disposal of waste batteries
The product complies with the DEEE/WEEE Directive (2012/19/UE French version, 2012/19/EU English version) on waste electrical and electronic equipment. Do not dispose it with other household waste. Instead, hand it over the appropriate collection point for recycling.
3
Certificates
Administration
OC/CB Scheme
ID (if applicable)
CE
FCC/IC
FCC ID: FI5TMSAP01
IC: 5056ATMSAP01
Regulatory Information
In progress
The Manufacture Française des Pneumatiques Michelin declares that the radio equipment type TMS AQ-01 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://iot.michelin.com/ The TMS AQ-01 has been tested in accordance with the EN 61326-1 standard of 2020 following the immunity levels corresponding to the ordinary environment. Product class: B. This device complies with part 15 of the FCC Rules and with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Michelin may void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC and ISED radiation exposure limits set forth for general population. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Le Présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Le présent appareil est conforme aux niveaux limites d’exigences d’exposition RF aux personnes définies par FCC et ISDE. L’appareil ne doit pas être installé à proximité ou être utilisé en conjonction avec une autre antenne ou un autre émetteur. Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
4
(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.
5
DOCUMENT REVISION
revision number 1
Autor Julien Guichon
Changes Initial Release
Date 29/10/2024
6
Documents / Resources
 |
MICHELIN TMS AQ-01 Tire Mounted Sensor [pdf] User Manual FI5TMSAP01, FI5TMSAP01, tmsap01, TMS AQ-01 Tire Mounted Sensor, TMS AQ-01, Tire Mounted Sensor, Mounted Sensor, Sensor |
