Pukapuka Tohutohu mō te Zigbee 1CH Switch Module-L

Zigbee 1CH Switch Module L - Featured Image

Waitohu ZigbeePukapuka Tohutohu
Zigbee Switch Module-L
1CH,2CH,3CH,4CH
(No Neutral Wire Required)

1CH Switch Module-L

Zigbee 1CH Switch Module L - PartsZigbee 1CH Switch Module L - Symbol 1

WHAKAMAHI WHAKAMAHI

Momo hua Zigbee Switch Module-L
Voltage AC200-240V 50 / 60Hz
Max. utaina 1CH: 10-100W
2CH: 2x (10-100W)
3CH: 3x (10-100W)
4CH: 4x (10-100W)
auau mahi 2.405GHz-2.480GHz
Te mahana mahi. -10℃ + 40℃
Kawa IEEE802.15.4
Te awhe mahi <100m
Pouri (WxDxH) 39.2×39.2×18 mm
Whakatauranga IP IP20
Pūtāhui 2tau
Tiwhikete CE ROHS

me te topenga whakairi

Zigbee 1CH Switch Module L - with mounting clip

WHAKATANGA

Zigbee 1CH Switch Module L - Symbol 2 Whakatupato:

  1. Me whakatuturu e tetahi tohunga hiko whai mana ki te whakarite i nga ture o te rohe.
  2. Tiakina te taputapu kia kore e taea e nga tamariki.
  3. Tiakina te taputapu mai i te wai, damp nga taiao wera ranei.
  4. Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, resulting to abnormal operation of the device.
  5. Ko te arai i te pakitara raima, i nga mea whakarewa ranei ka iti ake te awhe mahi whai hua o te taputapu, me karo.
  6. KAUA e ngana ki te wetewete, ki te whakatika, ki te whakarereke ranei i te taputapu.

FAQ

Q1: Me aha au mena kaore e taea te whirihora i te waahanga whakawhiti?

a. Please check whether the device is powered on. b. Make sure the Zigbee Gateway is available. c. Whether it’s in good internet conditions. d. Make sure the password entered in App is correct. e. Make sure the wiring is correct.

Q2: He aha te taputapu ka taea te hono atu ki tenei waahanga whakawhiti Zigbee?

such as a ceiling lamp, panel light, etc.

Q3: Ka aha mena ka weto te WIFI?

You can still control the device connected to the switch module with your traditional switch, and once WIFI is active again, the device connected to the module will connect automatically to your WIFI network.

Q4: Me aha au ka huri au i te whatunga WIFI ka huri ranei i te kupuhipa?

You have to reconnect our Zigbee switch module to the new Wi-Fi network accordingly, as per the App User

Q5: Me pehea taku tautuhi i te taputapu?

1. Switch on/off the traditional switch 5 times until the indicator light flashes. 2. Press the reset key for about 10 seconds until the indicator light flashes.

Tohutohu Hiko me nga Hoahoa

  1. Patohia te hiko hiko i mua i te kawe i nga mahi whakauru hiko.
  2. Whakauruhia nga waea kia rite ki te hoahoa waea waea.
  3. Whakauruhia te waahanga ki te pouaka hononga.
    Turn on the power supply and follow the switch module configuration instructions.
  4. Flash after the lights are off. Please attach accessories.

Zigbee 1CH Switch Module L - Symbol 2 Whakatupato: Do not connect the neutral line; otherwise, it will be permanently damaged.

Zigbee 1CH Switch Module L - Wiring diagram of fittings

1CH Zigbee Switch Module-L

Zigbee 1CH Switch Module L - 1CH Zigbee Switch Module-L

2CH Zigbee Switch Module-L

Zigbee 1CH Switch Module L - 2CH Zigbee Switch Module-L

Hoahoa waea o nga taputapu (L1 L2 Ko tetahi)

Zigbee 1CH Switch Module L - Wiring diagram of fittings 2

3CH Zigbee Switch Module-L

Zigbee 1CH Switch Module L - 3CH Zigbee Switch Module-L

Wiring diagram of fittings (L1 L2 L3 One of them)

Zigbee 1CH Switch Module L - Wiring diagram of fittings 3

4CH Zigbee Switch Module-L

Zigbee 1CH Switch Module L - 4CH Zigbee Switch Module-L

MANUAL Kaiwhakamahi KaiwhakamahiZigbee 1CH Switch Module L - QR Codehttp://smart.tuya.com/download

IOS APP / Android APP
Scan the QR code to download the Tuya Smart App, or you can also search the keyword “Tuya Smart” on App Store or Google Play to download the App.
Log in or register your account with your mobile number or e-mail address. Type in the verification code sent to your mobile or email, then set your login password. Click “Create Family” to enter the APP.

Zigbee 1CH Switch Module L - Open the control panelWhakatuwherahia te paewhiri mana o te kuaha ZigBee i runga i te Taupānga
I mua i te mahi tautuhi anō, me whakarite kia tāpirihia, kia tāutahia hoki te Zigbee Gateway ki te whatunga WIFI. Me whakarite kei roto te hua i te whānuitanga o te Whatunga Zigbee Gateway.

Zigbee 1CH Switch Module L - Zigbee Gateway

After the wiring of the switch module is done, press the reset key for about 10 seconds or turn on/off the traditional switch 5 times until the indicator light inside the module is flashing quickly for pairing.

Zigbee 1CH Switch Module L - Add sub-device

Pāwhiritia te “+” (Tāpirihia te pūrere iti) hei tīpako i te kuwaha hua e tika ana, ā, whai i ngā tohutohu kei te mata mō te hono.

Zigbee 1CH Switch Module L - connecting will take about

Ka roa te hononga mō te 10-120 hēkona pea, kei runga i te āhua o tō whatunga.
Ka mutu, ka taea e koe te whakahaere i te taputapu ma to waea pūkoro.

NGA WHAKAMAHI WHAKAMAHI
WIFI® Pouara
Te kuwaha ZigBee
iPhone, iPad (iOS 7.0 teitei ake ranei)
Android 4.0 teitei ake ranei

Zigbee 1CH Switch Module L - SYSTEM REQUIREMENTS

Waitohu Zigbee

Tuhinga / Rauemi

PDF thumbnail1CH Switch Module-L
Instruction Manual · 1CH Switch Module-L, Switch Module-L, Module-L

Tohutoro

Patai he patai

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Patai he patai

Ask a question about setup, compatibility, troubleshooting, or anything missing from this manual.