TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Whakatakotoranga

• Tauira: Q103
• Hototahi: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Hononga: Bluetooth, 2.4G Wireless, USB (Type-C)
• Mahi Voltage: DC 3.7V
• Mahi Naianei: <30mA
• Moe Aue: <5uA
• Whakapae Voltage/Naianei: DC 5V/500mA

Raparongoā

• Karekau te kaiwhakahaere e hono ana:
  • Me mohio kei te whakakiia te kaiwhakahaere.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Me mohio kei te whakahohea te Nihokikorangi ki to taputapu.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Patene kaore i te whakautu:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Tōmuri tāuru:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Whakaitihia te pokanoa mai i etahi atu taputapu ahokore.
  • Try connecting via USB cable if available.
• Karekau te kaiwhakahaere e utu ana:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Whakamātauria tētahi atu taura Momo-C, tētahi atu urutau hiko rānei.
  • The LED indicator should show the charging status.

Q103 Hoahoa Mahi

1. Pātene D-pad
2. Patene X/Y/A/B
3. HOME Reconnect/Power Button
4. PAIR PAIR
5. PĀTAHI PĀTAI
6. Patene TURBO
7. Pātene Rikareka/L3 Mauī
8. Pātene Rikareka/R3 Matau
9. PUKA MAA
10. Pātene Tīmata
11. L Patene
12. L2 Paatene
13. Tauranga Whakakauhau Momo-C
14. R2 Paatene
15. R Patene
16. Tautuhi poka
17. LED
18. Whakawhiti Aratau

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 me runga ake

Hononga Nihokikorangi

1. Hurihia te pana: Huri ki X kia uru ki te aratau X- INPUT.
2. Whakamahinga tuatahi (whakahoahoa hiko):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • He whero tonu te LED i te wa e angitu ana te hono ano.
3. Whakamahia ano (Hononga Anō):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. He whero tonu te LED i te wa e angitu ana te hono ano.
4. Press the PAIR button to power off the device.

Aratau HUKA

Hononga Nihokikorangi

1. Hurihia te pana: Huri ki te S kia uru ki te aratau Whakawhiti.
2. Whakamahinga tuatahi (whakahoahoa hiko):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   He kakariki tonu te LED i te wa e angitu ana te hono ano.
3. Whakamahia ano (Hononga Anō):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus mo te Android

Android 9.0 me runga ake

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Whakamahinga tuatahi (whakahoahoa hiko):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Whakamahia ano (Hononga Anō):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Patohia te paatene Pair hei whakaweto i te taputapu.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Whakahoutanga firmware

1. Honoa te V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Tautuhinga Joystick

• Te whakatikatika toka
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Tawhā hiko

• Mahi voltage: DC3.7V
• Te mahi i tenei wa: <30mA
• Moe ana: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Wā tūtatari: 30 ra (kua whakakiia katoatia)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Mahi Moe / Whakaoho:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

Whakatupato FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Whakahoahoa, nukuhia ranei te antenna whiwhi.
• Whakanuia te wehenga i waenga i te taputapu me te kaiwhiwhi.
• Honoa te taputapu ki tetahi putanga i runga i te ara iahiko rereke mai i tera e honoa ana te kaiwhiwhi.
• Korero atu ki te kaihoko, ki tetahi tohunga hangarau reo irirangi/TV mo te awhina.

Tupato: Ko nga huringa me nga whakarereketanga ki tenei taputapu kaore i tino whakaaetia e te kaiwhakanao ka whakakorehia to mana ki te whakahaere i enei taputapu.
Ka tutuki tenei taputapu ki te wahanga 15 o nga Ture FCC. Ko te mahi i raro i nga tikanga e rua e whai ake nei:

1. Kaore pea tenei taputapu e whakararu kino, a
2. Me whakaae tenei taputapu ki nga pokanoa kua tae mai, tae atu ki te pokanoa ka puta he mahi kore.

Ko enei taputapu e whai ana ki nga tepe whakamaarama iraruke FCC kua whakaritea mo te taiao kore whakahaere. Ko enei taputapu me whakauru me te whakahaere me te iti rawa o te 0cm te tawhiti i waenga i te radiator me to tinana.