Function Tester Manuals & User Guides

Tektronix 6011A Multi Function Tester Specifications Model: 6011A Manufacturer: KYORITSU ELECTRICAL INSTRUMENTS WORKSLTD. Operating Voltage: 230V AC +10%, -15% Functions: Loop, Prospective Short Circuit Current (PSC), RCD testing, Continuity testing, Insulation testing Safety Warnings Electricity is dangerous and can cause…

User Manual PRODUCT NOTICE  PRODUCT NAME Hand LF Tool---Part No.：HW71012-SGY-330 Function Summary The hand LF tool activates the tire pressure sensor with a low-frequency 125KHZ signal and receives the 433.92MHZ signal from the sensor to read the sensor information. PRODUCT…

MFT5 Operationg Instruction NO. 8241 MFT5 Multi Function Tester Technical description: The MFT 5 multi-function tester is a micro-processor controlled service test device which provides a simple method of checking important radio control system components including servos, speed controllers, batteries…

LCR-TCl Multi-function Tester Features Tawhā mahi Momo Wae Range Tawhā Whakaahuatanga , BJT hFE(DC Current Gain). Ube(Turanga-Emitter Voltage).ic(Naianei Kohikohi), Iceo(Naianei Tapahia te Kaikohi(IB=O)). Ices(Kohikohi Naianei poto), Uf(Whakamua Voltage o te tiaki ngoode) ngoode whakamua voltage <4.50V Forward voltage drop. junction capacitance, reverse…

WANLUTECH 510628 Multi Function Tester Product Information Specifications Product: WANLUTECH OTDR tester Battery: Built-in lithium ion rechargeable battery Adaptor: Original adaptor and connected cable Measurement Range: Optical fiber attenuation, connector attenuation, fault locator Usage: Construction, maintenance, and monitoring of optical…

SEAWARD PowerTest 1557 Multi Function Tester Product Information The Seaward PowerTest 1557 is an electrical installation tester that combines multiple test functions into one instrument. It is a multifunction tester (MFT) which is the industry standard for installation testing. The…

katranji ESR02 pro Digital Component ESR Meter Multi Function Tester Product Details Function Testing Usage Instructions Power ON: Press the “POWER/TEST” button before using. Test: Press the “POWER/TEST” button to start a test. Regardless of the pin sequence, this meter…

Megger MFT-X1 Multi Function Tester Voltage whakamātautau 1 Wāhanga (V Hz) 3 Wāhanga Voltage / Sequence (V Hz) Continuity tests Single Direction Test (Ω) Test Lead Null (Ω) Insulation tests Standard Insulation (IR) test Loop Impedance 2 wire test (Z)…