QUIN D30D Label Maker
Whakatakotoranga
| Rahi Whakaatu | 420 x 594 mm (A2) |
|---|---|
| Rahi Kopa | 84 x 74.25 mm |
| Tikanga Ta | Double-sided color printing |
Whakatakotoranga Tae
| Tae | C(%) | M(%) | Y(%) | K(%) |
|---|---|---|---|---|
| Pango | 0 | 0 | 0 | 100 |
| Whero | 0 | 100 | 100 | 0 |
| Karaka | 0 | 50 | 100 | 0 |
| Kakariki | 50 | 0 | 50 | 0 |
Tohutohu
This guide provides step-by-step instructions to set up and use your D300 Label Maker. Please follow the diagrams and instructions carefully to ensure proper setup and operation.
Diagrams and Setup
- Unpack the label maker and accessories.
- Whakauruhia nga pākahiko pera i te hoahoa.
- Load the label tape into the compartment.
- Follow the on-screen instructions to initialize the device.
Legal and Confidentiality Notice
All information contained in this document is proprietary to QUIN Enjoy Printing. Unauthorized reproduction or distribution of this document or any portion of it may result in severe civil and criminal penalties.
Tuhinga / Rauemi
 | D30D Label Maker |
Tohutoro
- Pukapuka Kaiwhakamahimanual.tools
Published: June 4, 2026