MBJ CTR-51 Kaiwhakahaere
Whakakotahitanga Miihini
Ko nga kaiwhakahaere CTR ka whakawhiwhia ki nga hononga mono mo te rama LED, nga tohu whakahaere, te atanga RS232 me te mana whakauru. He mea hanga te kaiwhakahaere mo te whakapuru reera potae o runga, he topenga ka maukati te waeine ki te reera potae o runga.
Ka kitea etahi atu pikitia 2D me te 3D i runga ipurangi: www.mbj-imaging.com
Nga Panui Haumaru
I mua i te mahi me tenei waahanga, panuihia nga kupu whakatupato me nga tohutohu mo te whakamahi.
- I hangaia te taputapu mo te whakamahi o roto anake.
- Hauora – Me momotu te taputapu mai i te puna hiko i mua i te tiimata o te whakaurunga me te tiaki. Kaua e whakamahia te taputapu inaa ka whara te tangata i te rahunga.
- Hiko - Ko te whare kei te wehe i te hiko mai i te papa o te hiko. I tua atu i te voli whakahaere e whakaaetia anatagKo te nui ake ranei o te nui o te huringa o naianei e whakaaetia ana mo ia hongere ka paopao te taputapu, ki te whakapoto ranei i te roanga o te waahanga rama rama hono.
- Te whakauru miihini - Ko te kaiwhakahaere he mea hanga mo te whakairinga reera potae o runga. Ka taea te whakamahi i te topenga hei maukati i te waeine ki te reera potae o runga. Mo te pai o te rere o te wera he 10mm te tawhiti maui/matau ki te waahanga e whai ake nei.
Tūnga LED's CTR-50/51
| LED | Tūnga | Te tikanga |
| LED | Tūnga | Te tikanga |
| 1 Mana | KAUPAPA ON | Tāuru hiko pūmana – weto
Tāuru hiko – kā |
| 2 Tūnga1) | KAUPAPA ON | Kua weto te rama arahina
I whakakāhia te rama arahina |
| ssll | Karekau he naianei, karekau he LED e hono ana | |
| sll | I riro te keu i te wa kei roto tonu i te IRQ2) (Flash + aputa rohe), ngaro keu | |
| slsl | te teitei o te pāmahana whakaaetia | |
| ssss | tirohia te mana RS232 rangatū i roto i nga raarangi | |
| 3 Kohi | KAUPAPA I TE KOHIA | Keu te ahua iti Keu te ahua teitei
4x: raupapa whakaoho punaha |
| 4 MBJ | WATE | Kaore i te whakamahia |
- s = rama poto, l = rama roa
- IRQ = tono haukoti
Tauira i roto i te Rangatū
| CTR-50 CTR-51 | |
| Ko nga mahi 1-hongere e whakahaerehia ana i naianei mo nga rama rama me nga tono rama rama ngawari | Voltage whakahaeretia ana te mahi 1-hongere mo nga rama rama poto, tino tika me te hiko teitei, nga hiko hiko mai i te 1µs ki te 100ms |
| He ngawari te whakarite o te naianei LED ma nga huringa hurihuri | He ngawari te whakarite mo te roanga o te kohiko LED me te naianei ma te huri hurihuri |
| Ko te mana rama tika ma te tohu 'maramatanga', te tohu 'strobe' ranei o te kamera me te whakatuu rama-a-ringa | |
Hononga Hiko
| Pin | CTR-50 Mahi | CTR-51 Mahi Kōrero | |
| 1 | 24V DC | Tāuru mana mana | |
| 2 | GND | Te whenua o te taputapu | |
| Pin | Mahi | Mahi | Kōrero |
| 3 | Rima 0V … 10V1)
0V= 0% o sel. 10V o nāianei=100% o sel. nāianei |
Whakarea turanga wa mo te huri hurihuri2)
Papa: 10 – 90µs Kāore i hono: 100 – 900µs 24V: 10.000 – 90.000µs |
I runga i te titi CTR-51 e toru nga mana o te titi 3: hono ki te whenua, maui kore hono (tuwhera) hono ranei ki te 24V. |
| 4 | Keu 12-24V | ||
| 5 | Keu GND | Te keu whenua, taratahi | |
| 63) | Keu 5V – TTL | Tohu iti <0.8V Tohu teitei > 2.0V | |
| 7 | GND | RS232 whenua, int. hono ki te taputapu GND | |
| 8 | RxD | Whiwhi raraunga RS232 | |
| 9 | TxD | Tuku raraunga RS232 | |
| Pin | Waea4) | Waea4) | Putanga ki te marama |
| 105) | mangu + kikorangi | LED (-) | |
| 11 | ma + parauri | LED (+) | |
- I whakawetohia te Dimmer na te taunoa wheketere. Me whakahohe ma te RS232. Karekau he hononga ki te titi 3, ka whakahohehia te whakamarumaru, ka rite te kaha ki te 0V = 0% o te naianei kua tohua
- Ka roa ake nga waa rama ka taea te whakarite ma te RS232
- Whakauru voltagi runga ake i te 5.5V ka ngaro te ara iahiko whakauru keu!
- mo te MBJ hono te taura me te MBJ LED rama (-x) kaore he kaiwhakahaere whakauru
- KAUA e hono atu ki te papa o waho o te puna hiko, ki te papa ranei o te tohu keu! Ka ngaro pea nga rama hono, taputapu ranei.
Aratau mahi
| Aratau CTR-50 Mahi Aratau CTR-51 Mahi | |||
| TONU | Maama tonu, ka mau tonu te LED | – | kore tautoko mo te haere tonu
marama, whakamahia te CTR-50 |
| AUTO1) | E whai ana te putanga-a-a-rama i te keu | AUTO | E whai ana te putanga-a-a-rama i te keu |
| Kohiko | Whakaritea-a-ringa mo te rama, whakaroa
me te roa (ma RS232 anake) |
Kohiko2) | Kohiko-i-keu me te tautuhi i te roanga kohiko (RS232) |
| WATE | I whakawetohia nga putanga LED | WATE | I whakawetohia nga putanga LED |
- Ko te tautuhinga wheketere CTR-50 o te aratau mahi he AUTO. Ko etahi atu momo mahi ka taea te kowhiri ma te atanga RS232.
- Ko te tautuhinga wheketere CTR-51 o te aratau mahi ko FLASH. Ko etahi atu momo mahi ka taea te kowhiri ma te atanga RS232.
Te kitenga o te puna marama
I muri i te tukunga o te CTR ki te voltage, ka noho tonu ki te Aratau Rapu kia kitea ra ano he whakamarama. Na ka huri te CTR ki te aratau kua tohua.
Taupānga Samputu mo te kaiwhakahaere CTR
Maama tonu
Maama tonu me te mana kanapa (CTR-50 anake)
RS232
Ka taea e te atanga rangatū te huri i te aratau mahi me te tatūnga o nga taima takitahi me nga ia. Ko nga whakahau whakahaere e whakaahuatia ana i roto i te pukapuka RS232 motuhake.
Whakawhiti Rotary
Whakamahia nga huringa hurihuri ki te whakarite i te ia e whakaaetia ana mo te LED hono. Tena koa tirohia te pukapuka a te kaihanga rama rama kia kore e neke ake i te teitei o te naianei LED.
Whakawhiti hurihuri o runga
| Turanga CTR-50 CTR-51 | ||
| Ko nga hikoinga 1A o naianei LED | Kohiko o naianei 2) | |
| 01) | 0A (ki te 0.9A) | Whakahaerehia ma RS232 (0 – 30A) |
| 1 | 1A (ki te 1.9A) | 1.0A |
| 2 | 2A (ki te 2.9A) | 1.5A |
| 3 | 3A (ki te 3.9A) | 2.1A |
| 4 | 4A (ki te 4.0A) | 3.1A |
| 5 | 4.5A | |
| 6 | 6.5A | |
| 7 | 9.4A | |
| 8 | 13.7A | |
| 9 | 20.0A | |
- CTR:50: Mena kua tautuhia nga huringa hurihuri e rua ki te '0', ko te 50mA te naianei, ko te 50mA te tautuhinga taunoa wheketere mo te naianei.
- CTR-51: Ko te tautuhinga taunoa wheketere ko 150mA.
Whakawhiti hurihuri raro
| Turanga CTR-50 CTR-51 | ||||
| LED o naianei 0.1A nga hikoinga1) | Roa Kohiko 2) | |||
| Pin 3 ki GND | Pin 3 – tuwhera | Pin 3 ki te 24V | ||
| 0 | taapiri 0mA | Whakahaerehia ma RS232 (0 – 30A) | ||
| 1 | taapiri 100mA | 10µs | 100µs | 1ms |
| … | … | … | … | … |
| 9 | taapiri 900mA | 90µs | 900µs | 9ms |
- CTR-50: Mena kua tautuhia nga huringa hurihuri e rua ki te '0', ko te 50mA te naianei, ko te 50mA te tautuhinga wheketere mo te naianei.
- CTR-51: He poto ake, he roa ake hoki nga waa uira (1µs – 100ms) ka taea te whakarite ma te RS232.
He rama whakakorikori me te putanga totohu NPN (tohu strobe hurihuri, kaikohi tuwhera)
| Whakatakotoranga CTR-50 CTR-51 | ||
| Tawhā hiko | ||
| Mahinga Mahi Voltage | 24V DC/ 4.5A
5V – 26V, min. 2V i runga ake i te voli whakamuatage o te puna marama arahina |
|
| Arahina te naianei tonu1)
(KĀ ME te aratau Aunoa) |
50mA … 4000mA | 150mA … 1000mA
(Aratau AUTO anake) |
| kohiko LED naianei2) | 50mA … 4000mA | 150mA … 30A |
| Min roanga kohiko | 2ms i runga i te waahi mahi LED me te huringa mahi | 1µs i runga i te waahi mahi LED me te huringa mahi |
| Max. roanga flash | 59s | |
| Max. kohiko torohū3) | <500µs | <1µs |
| Roa kohiko me te whakaroa:
te taahiraa iti rawa e taea te whakarite |
10µs | 1µs |
| Voltage awhe mo LED
kōwae |
āhua. 2.5V ki te 22.0V | |
| Tawhā miihini | ||
| Ahu (H x W x D) | 36mm x 80mm x 93mm | |
| Taumaha | 350g | |
| Kaihono | 2 Pin plug contact (RM5.08), 7 Pin plug contact (RM3.81), 2 Pin inv. whakapā mono (RM3.81) | |
| Tiwhikete | CE, RoHS, EN61000-6-2, EN61000-6-4 | |
| Te tohu tiaki | IP20 (i hangaia mo te rūnanga whakahaere) | |
| Te haumākū | 30% ki te 70% | |
| Te pāmahana whakahaere | 10°C ki te 30°C | |
| Nga taputapu | Ko te topenga whakapuru rerewe o runga me nga mono (te whānuitanga o te tuku). Mo nga taura, nga whakairinga me nga rama rama tirohia koa www.mbj-imaging.com | |
- He iti ake i te 100mA te hiko o te LED ka puta pea te hikoi marama
- Ko te kaha o te uira ka tukuna mai e te puritanga me te wa tika mo te whakakii. Ko te kaha o te uira (te auau korakora * te roanga o te rama * te waa) he iti ki te 1A. Hei tauira: 100 uira/s * 100µs * 30A = 0.3A
- Ko te teitei ake o te naianei me te poto ake o te wa huringa, ka nui ake te roanga.
Ko te TTL te rama i whakaoho me te rapunga PNP (tuwhera tuwhera)
MBJ Atahanga GmbH
Jochim-Klindt-Strasse 7 49 41 02 77 89 0 – 31
22926 Ahrensburg, Tiamana sales@mbj-imaging.com www.mbj-imaging.com
A-ringa CTR50/51 Kaiwhakahaere: Arotakenga 05 – 18 Mai 2021. INDD file Rev09.
Tuhinga / Rauemi
 | CTR-51 Kaiwhakahaere |
Tohutoro
- Pukapuka Kaiwhakamahimanual.tools