LTECH M9 LED Controller Instruction Manual

LTECH M9 LED Controller

The MINI Series LED Remote Controller adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (when unobstructed). When used with the P Series Controllers (P1/P2/P3/P4/P5), one controller supports 5-channel output and is compatible with five types of lamps: DIM (dimming), CT (color temperature), RGB (three-primary color), RGBW (RGB + white), and RGBCW (RGB + cool white + warm white). Within the effective control range, one remote controller can control an unlimited number of controllers, enabling functions such as light on/off, brightness adjustment, color temperature adjustment, RGB static color adjustment, and dynamic mode effects.

It has 9 built-in dynamic modes that can be programmed and modified via the remote controller, meeting users’ needs for different lighting applications. Additionally, it supports enabling/disabling the power-off memory mode and allows setting a 1-9 second fade-in/fade-out time for the controller’s on/off operation.

Tawhā Hangarau

Ahu

Tāuta Hua

E rua nga huarahi hei whakatika i te pupuri mamao:

1. Whakatikahia te pupuri mamao i roto i te pakitara me nga wiri e rua.
2. Whakatikahia te pupuri mamao i te pakitara me te whakapiri 3M.

Tuhipoka: Tena koa kumea te ripa pākahiko i mua i te whakamahi tuatahi

Nga Mahi Patene

• Kā/Weto: Press briefly to turn the light on or off.
• Whero/Kakariki/Kakariki: Press briefly to turn the static red/green/blue channel on or off; Press and hold to adjust the brightness of the current channel.
• W/CCT: Press briefly to turn the W/CCT channel on or off; Press and hold to adjust the brightness of the W channel or the color temperature of the CCT channel.
• CCT Brightness: Press and hold to adjust the brightness of the CCT channel.
• Color Save Button: Press briefly to recall the saved static color;  Press and hold to save the current static color.
• Program Play Button: Press briefly to switch between 3 dynamic effects (jump, fade, stroboscope) (applied to transitions between saved static colors); Press and hold to play 9 dynamic modes in a loop.
• Mode Save Button: Press briefly to recall the dynamic mode; Press and hold to save the current dynamic effect as a dynamic mode.
• Tere/Tianapa +/-: Press briefly to adjust the speed of the dynamic mode; Press and hold to adjust the brightness of the dynamic mode.
• Power-Off Memory Mode Switch: Press briefly to enable/disable the memory mode of the current controller.
• On/Off Fade Time: Press and hold the “FADE TIME” button and the Mode Save Button (while pressing the number keys 1-9) to set the on/off fade time of the controller (1-9 seconds).

Usage of the Programming Button

1. Color Selection: Use the number keys 1-7 to store 7 colors. After selecting a color by pressing the RGB button press and hold the Color Save Buttons in sequence to save the current static color. (The color will be automatically saved to the corresponding button.)
2. Press the Programming Play Button to set 3 dynamic effects for the 1-7 static colors.(Single press to switch: Jump, Fade, Strobe)
   Exampte 1:Red, Green, Blue, Yellow, Purple, Cyan, White Seven colors, Jump/Fade/Strobe
   Exampte 2:Red, Blue Two colors, Jump/Fade/Strobe
   Exampte 3:
   Red, White, Green, White 4, Blue Five colors, Jump/Fade/Strobe
   Note: R + B = Purple, R + G = Yellow, G + B = Cyan, R + G + B = White, R/G/B turned off together = Black
3. Press the Speed/Brightness +/- buttons briefly to control the mode brightness. There are 8 brightness levels in total, with the default level set to 5.
4. Press and hold the Mode Save Buttonto save the current static color + dynamic effect to one of the Mode Save Buttons (1-9).

Change Mode Selection List

NO.	Color(Switch Colors via  )	Switch Between 3 Types via   Button Press
		Peke	Muhani	Strobe
1	Pango
2	Whero	Whero Pateko	Whero Muhani ki roto me waho	Whero Whero
3	Kakariki	Kākariki Katia	Muhani Kakariki ki roto me waho	Kakariki Strobe
4	Kahurangi	Kikorangi pateko	Muhani Kahurangi ki roto me waho	Kahurangi Kahurangi
5	Kōwhai	Kōwhai pateko	Yellow Fade In and Out	Kōwhai Kōwhai
6	Waiporoporo	Waiporoporo Tuuturu	Purple Fade In and Out	Poroporoporoporo
7	Cyan	Styan Cyan	Cyan Fade In and Out	Maamaa Strobe
8	Mā	Pateko White	Muhani Ma ki roto me waho	Maama Strobe
9	Whero/Kakariki/Kakariki	Peke Whero-Kakariki-Kakariki	Whero-Kakariki-Purirangi Muhani	Red-Green-Blue Strobe
10	Red/Green/Blue/Yellow/ Purple/Cyan/White	Seven-Color Jump	Seven-Color Fade	Seven-Color Strobe

Wiring Diagram for Receiver and Controller

Tuhipoka: One remote control can control an unlimited number of controllers

Tautuhi Anō i te Mahi Pihi

• Reset Static Color:
  Turn off all channels, then press and hold the Color Save Button corresponding to the static color you want to reset to save. This will clear the current static color.
• Reset Dynamic Modes:
  Press and hold both the Color Save Button “5” and the Programming Play Button simultaneously until the indicator light flashes several times and then turns off. This indicates that all dynamic modes have been reset successfully.
• Synchronize the Remote Control’s Dynamic Modes to the Controller:
  Press and hold both the Color Save Button “1” and “4” until the indicator light flashes several times and then turns off. This indicates that all dynamic modes edited on the remote control have been fully synchronized to the controller.
  Note: If the dynamic modes of the remote control have been reset, you need to synchronize the reset dynamic modes of the remote control to the controller again. This avoids desynchronization between the remote control and the controller’s dynamic modes, which would cause abnormal effect issues.

Pair the Controller

Taurite Waehere

1. Method 1: Button Code Matching
   Briefly press the Controller ID Learning Button; the load light will flash. Within 10 seconds, press and hold the Remote Control’s On/Off Button until the load light flashes slowly and then stays on. This indicates successful code matching.
2. Method 2: Power-On Code Matching
   Whakawetohia te kaiwhakahaere;
   After powering the controller on again, press and hold the On/Off Button on the remote control within 3 seconds until the load light flashes slowly and then stays on. This indicates successful code matching.

Whakakore Waehere

• Button Code Clearing Method:
  Press and hold the Controller ID Learning Button for 10 seconds. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.
• Power-On Code Clearing Method:
  Perform 10 consecutive power-on and power-off operations on the controller. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.

Tūnga Maama Tohu

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Tuhipoka: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Te kawe me te rokiroki

1.  Te kawe waka
   Ka taea te tukuna nga hua ma nga waka, poti me nga waka rererangi.
   I te wa e kawe ana, me tiaki nga hua mai i te ua me te ra. Tena koa karohia te wiri nui me te wiri i te wa e utaina ana me te tango.
2. Rokiroki
   Me whai nga tikanga rokiroki ki nga Paerewa Taiao o te Akomanga I. Ko nga hua kua penapenahia mo te neke atu i te ono marama e taunaki ana kia tirotirohia ano ka taea te whakamahi i muri noa i to raatau tohu.

Nga aro
Whakamahia koa i roto i te waahi maroke o roto;

• I te wa e whakauru ana i te pākahiko, hono tika te tauranga pai me te kino. Ki te kore e whakamahia te mamao mo te wa roa, tangohia te pākahiko ki waho;
• Ka whakapotohia te tawhiti mamao, karekau ranei te mamao e mahi i nga wa katoa, me whakarereke te pākahiko i te waa;
• Tena koa tangohia mai ka tuu ki raro kia kore ai e taka te kino;
• Mena ka puta he he, kaua e ngana ki te whakatika i a koe ake nga hua. Mena he patai taau, tena koa whakapā atu ki o kaiwhakarato.
• Ka whakarereke tenei pukapuka i te kore e panui. Ko nga mahi hua e pa ana ki nga taonga. Tena koa ki te whakapiri atu ki o maatau kaitoha mana mena he paatai ​​taau.

Whakaaetanga Raihana

Nga wa whakamana mai i te ra tuku: 5 tau.
Ko nga ratonga whakatika, whakakapi kore utu ranei mo nga raru kounga ka tukuna i roto i nga waa whakamana.

Nga whakakahoretanga Raihana i raro iho nei:
Ko nga tikanga e whai ake nei kaore i roto i te awhe taurangi mo nga ratonga whakatika, whakakapi kore utu ranei:

• I tua atu i nga wa whakamana;
• Tetahi kino hangai na te vol teiteitage, overload, or improper operations; Products with severe physical damage;
• Nga kino i puta mai i nga aitua taiao me te kaha majeure;
• Kua pakaru nga tapanga whakamana me nga tohu tohu.
• No any contract signed by our company.

1. Ko te whakatikatika, ko te whakakapi rānei te rongoā anake mā ngā kiritaki. Kāore tā mātou kamupene e whai kawenga mō ngā kino tūpono, kino rānei, ki te kore e tutuki i raro i te ture.
2.  Kei tā mātou kamupene te mana ki te whakarerekē, ki te whakarerekē rānei i ngā tikanga o tēnei pūtāhui, ā, ko te tukunga ā-tuhi te mea e mana ai.

WHAKATOKANGA

• TE WHAKAMAHI KAUPAPA: Kei roto i tenei hua he pūtau paatene, he pākahiko moni ranei.
• TE MATE, te whara kino ranei ka pa mai ki te kainga.
• Ka horomia e te pūtau patene, te pākahiko moni ranei ka wera te matū o roto i roto i te 2 haora.
• KIA KAUPAPA I NGA PAHIhiko hou me nga papahiko kua whakamahia kia kore e taea e nga tamariki
• Rapua tonu atu ki te rongoa mena ka whakapaehia kua horomia te pākahiko, kua whakauruhia ranei ki roto i tetahi wahanga o te tinana.
• Tango me te hangarua i te wa tonu, ka rukea ranei nga pākahiko kua whakamahia i runga i nga ture o te rohe, kia matara atu i nga tamariki. KAUA e maka atu nga pākahiko ki roto i nga para o te whare ka tahuna ranei.
• Ahakoa nga pākahiko kua whakamahia pea ka whara kino, ka mate ranei.
• Waea atu ki tetahi pokapū whakahaere paihana o te rohe mo nga korero maimoatanga.
• The compatible battery type: CR2032.
• Ko te pūhiko ingoa voltage: 3vc.
• Ko nga pākahiko kore-recharge e kore e taea te whakakii ano.
• Kaua e kaha ki te tuku, ki te whakakii, ki te wetewete, ki te wera i runga ake (te whakatauranga pāmahana i tohua e te kaihanga) ka tahuna ranei. Ma te mahi pera ka whara pea na te hau, te turuturu, te pahūtanga ranei ka puta he weranga matū.
• Me whakarite kia tika te whakauru o nga pākahiko i runga i te polarity (+ me te -).
• Kaua e hanumi nga pākahiko tawhito me nga pākahiko hou, momo rama rereke, momo pākahiko ranei, penei i te kawakore, te waro-konutea, te pākahiko rechargeable ranei.
• Tango me te hangarua tonu, maka atu ranei nga pākahiko mai i nga taputapu kaore i whakamahia mo te wa roa e ai ki nga ture a rohe.
• Whakaorangia te wahanga pākahiko i nga wa katoa. Ki te kore e kati te wahanga pākahiko, kati te whakamahi i te hua, tangohia nga pākahiko, kia matara atu i nga tamariki.

Pātai Auau