1. Hua Neke Atuview
The Qingping Digital Bluetooth Thermometer Hygrometer is designed to provide accurate, real-time temperature and humidity readings for indoor environments. Featuring an E Ink display for clear visibility from various angles, this compact device offers multiple mounting options and long battery life. It can connect to the Qingping+ app for remote data access and historical data tracking.
Figure 1: Qingping Thermometer Hygrometer and its companion app interface.
2. Tatūnga
2.1. Tāuta Pūhiko
The device uses one CR2430 Lithium Metal button cell battery, which is included. To install or replace the battery:
- Kimihia te uhi o te wahanga pākahiko kei muri o te taputapu.
- Twist the cover counter-clockwise to open it.
- Whakauruhia te pākahiko CR2430 me te taha pai (+) e anga whakarunga ana.
- Replace the cover and twist clockwise to secure it.
Figure 2: Battery compartment showing the CR2430 battery.
2.2. Kōwhiringa Whakapuru
The Qingping Thermometer Hygrometer offers versatile placement options:
- Turanga Papamahi: Open the back cover to an angle of 90 degrees to the body. This allows the device to stand upright on a flat surface.
- Whakapiki taiepa: Use the supplied wall sticker. Attach the sticker to a clean, dry wall surface, then attach the monitor to the sticker. The monitor has built-in magnets, and the wall sticker contains an iron plate for secure attachment.
- Āpitihanga autō: The device has built-in magnets, allowing it to be directly attached to iron surfaces, such as a refrigerator door.
Figure 3: Desktop and Wall mounting configurations.
3. Nga Tohutohu Whakahaere
3.1. E Ink Display
The E Ink display provides clear, paper-like readings of temperature and humidity. It offers ultra-wide viewing angles and high contrast for easy readability from various positions in a room.
Figure 4: Features of the E Ink display.
3.2. Ngā Wāhanga Pāmahana Whakawhiti
To switch between Fahrenheit (°F) and Celsius (°C), press the button located on the back of the product.
3.3. App Connection and Remote Monitoring (Qingping+ App)
To access temperature and humidity data remotely, download the Qingping+ app from the Google Play Store or Apple App Store. A Qingping Bluetooth Gateway (sold separately) is required for remote access functionality.
Figure 5: Remote monitoring via the Qingping+ app.
3.4. Historical Data Recording
The device tracks and saves data for up to 30 days. This historical data can be viewed as graphical statistics within the Qingping+ app and can also be exported in CSV format if needed.
Figure 6: Historical data viewable in the Qingping+ app.
4. Tiaki
4.1. Te Ora Pūhiko me te Whakakapinga
The device features low power consumption, providing approximately 10 months of battery life in normal indoor environments. When the battery is low, a battery icon will appear on the display. Refer to Section 2.1 for battery replacement instructions.
4.2. Tiaki me te horoi
Hei whakarite i nga panui tika me te whakaroa i te oranga o te taputapu:
- Horoia te taputapu ki te kakahu ngohengohe, maroke. Kaua e whakamahi i nga taputapu horoi, kaua e rukuhia te taputapu ki te wai.
- Avoid placing the product in environments with humidity consistently higher than 90% for long-term use, as this may affect performance.
- Kaua e araia te kohao hau ki raro o te hua.
5. Te Raru
- Nga Panui Heke:
- Ensure the device is placed in a stable environment, away from direct sunlight, drafts, or heat sources.
- Allow approximately 15 minutes for the readings to stabilize after initial setup or significant environmental changes.
- Verify the vent hole on the bottom of the product is not blocked.
- Display Issues (e.g., "188" displayed):
- This indicates a factory reset or an error. Press and hold the button on the back of the product until the screen displays "188", then release. Wait for the product to return to correct temperature and humidity readings.
- No Data in App / Connection Issues:
- Ensure Bluetooth is enabled on your smartphone and the device is within range.
- For remote access, confirm that a Qingping Bluetooth Gateway is properly set up and connected.
- Check the battery level of the device.
- Restart the Qingping+ app and/or your smartphone.
6. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | wdl-1157 |
| Ahu | 2.91 x 0.63 x 2.91 inihi |
| Taumaha | 3.53 hekere |
| Awhe Pawera | 32 ~ 122°F (0 ~ 50°C) |
| Taumata Humidity | 0% ~ 99.9%RH (under no condensation circumstances) |
| Te Tikanga o te Pamahana | 0.1° |
| Momo Pūhiko | 1 x CR2430 Ritiumu whakarewa (kei roto) |
| Ora Pūhiko | Approx. 10 months (in normal indoor environments) |
| Hononga | Nihokikorangi Pūngao Iti |
| Rokiroki Raraunga | Up to 30 days (viewable in Qingping+ app) |
Figure 7: High accuracy sensor from Sensirion.
7. Pūtāhui me te Tautoko
For warranty information and technical support, please refer to the documentation included with your product packaging or visit the official Qingping webpae. Puritia to rihiti hoko mo nga kereme whakamana.
For further assistance, you may also contact Qingping customer service through their official channels.