Mars Gaming MPB850 850W 80 Plus Bronze PC Power Supply User Manual

1. Kupu Whakataki

This manual provides essential information for the proper installation, operation, and maintenance of your Mars Gaming MPB850 850W 80 Plus Bronze PC Power Supply. Please read this manual thoroughly before installation to ensure safe and efficient use of the product.

2. Nga korero haumaru

WARNING: Risk of electric shock. Do not open the power supply unit. There are no user-serviceable parts inside.

• Ensure the power supply is disconnected from the main power outlet before installation or maintenance.
• Install the power supply in a well-ventilated area to prevent overheating.
• Whakamahia anake ngā taura i whakaratohia me te pūtake hiko.
• This power supply is designed for use with personal computers only.
• The MPB850 includes multiple protection mechanisms: Over Power Protection (OPP), Over Voltage Parenga (OVP), I raro i te Voltage Protection (UVP), and Short Circuit Protection (SCP) to ensure system safety.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• Mars Gaming MPB850 850W Power Supply Unit
• Waea hiko AC
• Whakaeke Tiu
• Pukapuka Kaiwhakamahi (tenei tuhinga)

4. Nga Hua o te Hua

The Mars Gaming MPB850 is a high-performance power supply designed for reliable and efficient operation in personal computers.

• 850W Putanga Hiko: Ka whakarato ample power for demanding PC configurations.
• 80 Plus Bronze 230V EU Certified: Achieves up to 90% efficiency, reducing energy waste and heat generation.
• SilentRPM Technology: Features an ultra-silent 120mm fan with intelligent thermal control, maintaining noise levels at just 10 dB up to 40% load.
• Active PFC: Power Factor Correction with 99% efficiency for stable power delivery.
• 12V Single Rail Design: Ensures consistent and stable power to critical components.
• Optimized Cabling: Flat, black, and extra-long cables for easy installation and improved cable management.

This power supply is built with industrial-grade filtration systems and has been approved by renowned European testing laboratories, ensuring a high degree of safety and reliability.

5. Tatūnga me te Tāuta

Follow these steps to install your Mars Gaming MPB850 power supply:

1. Whakaritehia to Pūnaha: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your PC case.
2. Tango PSU Tawhito (mehemea e tika ana): Disconnect all cables from your old power supply and remove its mounting screws. Carefully slide it out of the case.
3. Tāuta PSU Hōu: Gently slide the Mars Gaming MPB850 into the power supply bay of your PC case. Ensure the fan is facing the correct direction for optimal airflow (usually facing downwards if your case has a bottom vent, or upwards if it's a top-mounted PSU). Secure the power supply with the provided mounting screws.
4. Connect Main Power (20+4 Pin): Connect the large 20+4 pin ATX connector to the corresponding port on your motherboard. Ensure it clicks into place.
5. Connect CPU Power (4+4 Pin): Connect the 4+4 pin CPU power connector to the CPU power port on your motherboard. This is usually located near the CPU socket.
6. Connect PCI-E Power (6+2 Pin): If you have a dedicated graphics card, connect the 6+2 pin PCI-E connectors to your graphics card. Some high-end cards may require two or more such connectors.
7. Connect SATA Devices: Use the SATA power connectors for your SSDs, HDDs, and optical drives.
8. Connect PATA Devices: Use the PATA (Molex) connectors for older devices or case fans that require them.
9. Whakaha Uepu: Utilize the flat, black, and extra-long cables to route them neatly behind the motherboard tray or through designated channels in your case. This improves airflow and aesthetics.
10. Close Case and Connect AC Power: Once all connections are secure, close your PC case. Connect the AC power cord to the power supply and then to a wall outlet.

6. Nga Tohutohu Whakahaere

After successful installation, operating the Mars Gaming MPB850 is straightforward:

1. Whakahiko: Me whakarite kei te tūranga 'ON' (I) te pana hiko kei muri o te pūtake hiko.
2. Tīmata PC: Press the power button on your computer case. The power supply will provide power to all connected components.
3. Mahinga Fan: The 120mm fan will operate quietly, utilizing SilentRPM technology to adjust its speed based on the power supply's load and temperature, ensuring optimal cooling with minimal noise.

7. Tiaki

Proper maintenance ensures the longevity and optimal performance of your power supply:

• Whakapai puehu: Periodically clean dust from the power supply's fan and vents using compressed air. Ensure the PC is powered off and unplugged before cleaning.
• Rererangi: Ensure that the PC case has adequate airflow and that the power supply's intake and exhaust vents are not obstructed.
• Kaua e Tuwhera: Never attempt to open the power supply unit. It contains high voltage components that can cause severe injury or death. Opening the unit will also void the warranty.

8. Te Raru

If you encounter issues with your Mars Gaming MPB850, consider the following:

• Kore Mana:
  • Check if the AC power cord is securely connected to both the power supply and the wall outlet.
  • Ensure the power switch on the back of the PSU is in the 'ON' (I) position.
  • Verify that all internal power cables (20+4 pin, 4+4 pin, PCI-E) are correctly and firmly connected to the motherboard and components.
  • Whakamatautauria te putanga o te pakitara me tetahi atu taputapu hei whakaū i te mana.
• Intermittent Power/System Instability:
  • Ensure the power supply is adequately rated for all your system components.
  • Tirohia mo nga hononga taura wetewete.
  • Me whakarite kia tika te hau kia kore e wera rawa.
• Haruru rereke:
  • While the SilentRPM fan is designed for quiet operation, excessive noise might indicate dust buildup. Refer to the Maintenance section for cleaning.
  • If the noise persists and is not related to dust, contact customer support.

If these steps do not resolve the issue, contact Mars Gaming customer support for further assistance.

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

Mars Gaming products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official Mars Gaming webpae.

For technical support, troubleshooting assistance, or warranty claims, please contact Mars Gaming customer service through their official webte waahi, te kaihokohoko ranei i hokona ai te hua.