DSPL-2440DS Graphic Main Display Board
Instruction Manual
Module Mounting Locations
The DSPL-2440DS Graphic Main Display board is shown mounted into the BBX-FXMNS(R) (MMX-FXMNS(R))
The enclosure is part of the adder modules on the inner dead front chassis. The front doors and inner deadfront chassis are all part of the BBX-FXMNS(R) (MMX-FXMNS(R)) Enclosure; see Figure 1 below. The DSPL-2440DS may be mounted to the inner dead front chassis of all FleX-Net™ and MMX™ fire alarm enclosures using the four #6 screws provided.
Figure 1 DSPL-2440DS Mounted in the BBX-FXMNS(R) (MMX-BBX-FXMNS(R)) Enclosure
Electrical Specifications for Battery Calculations
Voltage: 24 VDC
| Current Consumption: | standby current: 29 mA alarm current: 75 mA |
Documents / Resources
 |
MGC DSPL-2440DS Graphic Main Display Board [pdf] Instruction Manual DSPL-2440DS, Graphic Main Display Board, DSPL-2440DS Graphic Main Display Board, Main Display Board, Display Board |
