1. Fampidirana
The INKBIRDPLUS INK-IFT01 is a non-contact infrared thermometer designed for accurate surface temperature measurements across a wide range of applications. It features a 12:1 distance-to-spot ratio, adjustable emissivity, and a clear backlit LCD display for convenient use. This manual provides essential information for the safe and effective operation of your device.
Figure 1: INKBIRDPLUS INK-IFT01 Infrared Thermometer
2. Information momba ny fiarovana
Please read all safety warnings carefully before using the device.
- This infrared thermometer is intended for measuring surface temperatures only. It is not designed for use on humans or animals, and readings obtained from such applications will be inaccurate.
- Do not attempt to measure the internal temperature of any object with this device.
- Never irradiate human eyes directly or indirectly with the laser beam at any time. Direct exposure can cause eye damage.
- Arovy amin'ny ankizy ny fitaovana.
- Do not use the device in environments with explosive gases, vapor, or dust.
- Fadio ny mampiseho ny fitaovana amin'ny mari-pana tafahoatra, ny hamandoana, na ny tara-masoandro mivantana mandritra ny fotoana maharitra.
3. Vokatra mihoatraview
Familiarize yourself with the main components of your INKBIRDPLUS INK-IFT01 thermometer:
Figure 2: Labeled components of the INKBIRDPLUS INK-IFT01
- Laser Hole: Emits the targeting laser.
- Infrared Sensor: Mamantatra ny taratra infrarouge ho fandrefesana ny mari-pana.
- Ecran LCD: Displays temperature readings, battery status, and other indicators.
- ℃/℉/Down Button: Used to switch between Celsius and Fahrenheit, and for navigating menus.
- Function Button (MODE): Accesses settings and modes.
- Laser/Up Button: Toggles the laser on/off and for navigating menus.
- Trigger: Mampandeha ny fandrefesana.
- Efitra bateria: Mitazona ny bateria 9V.
4. Fametrahana
4.1 Fametrahana bateria
The INKBIRDPLUS INK-IFT01 requires one 9V 6F22 battery for operation. A new battery can provide approximately 12 months of continuous use.
- Tadiavo eo amin'ny tahon'ny termometra ny fonon'ny fitoeran'ny bateria.
- Gently pull the cover downwards to open the compartment.
- Insert a 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Akombony ny fonon'ny fitoeran'ny bateria mandra-pikitikitika tsara azy eo amin'ny toerany.
Figure 3: Battery installation process
5. Fampandehanana
5.1 Mandray refy
- Atondroy eo amin'ny toerana kendrena ny termometra.
- Press and hold the trigger to activate the laser and begin live temperature readings. The laser dot indicates the center of the measurement area.
- Release the trigger to hold the current temperature reading on the display. The reading will remain on the screen for a short period before the device automatically powers off to save energy.
Figure 4: Trigger usage for live and locked readings
5.2 Tahan'ny elanelana amin'ny teboka (D:S)
The INK-IFT01 has a Distance to Spot Ratio of 12:1. This means that at a distance of 12 units from the target, the measurement spot diameter will be 1 unit. For example, if you are 12 inches away from the target, the measurement area will be 1 inch in diameter. To ensure accurate readings, make sure the target area is larger than the spot size.
Figure 5: Understanding Distance to Spot Ratio
5.3 Switching Temperature Units (℃/℉)
To switch between Celsius (℃) and Fahrenheit (℉), press the dedicated ℃/℉/Down Button located below the LCD screen. The display will update to show the selected unit.
5.4 Adjustable Emissivity
Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. The INK-IFT01 allows you to adjust the emissivity from 0.1 to 1.0 to improve measurement accuracy for various surfaces. To adjust emissivity, press the MODE button to enter the emissivity setting, then use the Up SY Midina bokotra hanovana ny sandany.
Refer to the following table for common emissivity values:
| KEVITRA | Emissivity |
|---|---|
| Aluminum (oxidized) | 0.20 - 0.40 |
| Brass (oxidized) | 0.61 |
| Iron (oxidized) | 0.78 - 0.82 |
| Varahina (oxidized) | 0.78 |
| Loko (matte) | 0.92 - 0.96 |
| Rano | 0.93 - 0.96 |
| HAZO | 0.90 - 0.95 |
| BETAO | 0.94 |
Note: This is a partial list. For a comprehensive emissivity table, please refer to the full product manual.
5.5 Multiple Applications
The INKBIRDPLUS INK-IFT01 is suitable for various non-contact temperature measurement tasks, including:
- Cooking and BBQ (surface temperature of grills, ovens, food)
- Automotive diagnostics (engine components, tires)
- Industrial maintenance (electrical panels, machinery)
- Home inspections (HVAC, insulation, refrigerators)
Sary 6: Eksamples of thermometer applications
6. Fikojakojana
6.1 Fanadiovana
- Mba hanadiovana ny fitaovana, mampiasa malefaka, damp lamba. Aza mampiasa mpanadio abrasive na solvents.
- For the lens, use a soft cloth or cotton swab with a small amount of rubbing alcohol. Allow the lens to dry completely before use.
- Ensure no liquid enters the device casing.
6.2 Fitehirizana
- When not in use, store the thermometer in a dry, cool place, away from direct sunlight and extreme temperatures.
- If storing for an extended period, remove the battery to prevent leakage and damage to the device.
7. Famahana olana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy misy efijery/Tsy mandeha ny fitaovana | Low or dead battery; Incorrect battery installation | Replace the 9V battery; Ensure battery is inserted with correct polarity. |
| Vakiteny tsy marina | Incorrect emissivity setting; Distance to spot ratio too large; Lens is dirty; Device not calibrated (unlikely for user) | Adjust emissivity for the target material; Move closer to the target; Clean the lens; Contact customer support if issues persist. |
| Cannot switch between ℃/℉ | Incorrect button press; Software glitch | Ensure you are pressing the dedicated ℃/℉/Down Button. If the issue persists, try removing and reinserting the battery. |
| Laser tsy miasa | Laser is turned off; Malfunction | Tsindrio ny Laser/Up Button to toggle the laser. If it still doesn't work, contact customer support. |
8. Famaritana
| endri-javatra | antsipirihany |
|---|---|
| Anarana modely | INK-IFT01 |
| Fandrefesana Range | -58℉~1022℉ / -50℃~550℃ |
| araka ny marina | ±2% na ±2℃ (izay lehibe kokoa) |
| Distance to spot ratio (D:S) | 12:1 |
| Emissivity | Adjustable amin'ny 0.1 hatramin'ny 1.0 |
| Fotoam-pamaliana | 0.5 segondra |
| Karazana fampisehoana | Backlit LCD |
| Loharanon-kery | 9V 6F22 Battery (approx. 12 months life) |
| Temperature miasa | 0 hatramin'ny 50 ℃ (32 ~ 122 ℉) |
| Temperature fitehirizana | -20 hatramin'ny 50 ℃ (-4 ~ 122 ℉) |
| Lanja entana | 190 g |
| Dimensions (eo ho eo) | 14 cm (halavany) |
| Anisan'ny singa | INKBIRD Infrared Thermometer Gun INK-IFT01 |
9. Warranty & Fanohanana
9.1 Fampahalalana momba ny fiantohana
INKBIRDPLUS products are manufactured to high-quality standards and are warranted against manufacturing defects. Please refer to the warranty card included with your product or visit the official INKBIRD webtranokala momba ny fepetra sy fepetra momba ny fiantohana amin'ny antsipiriany.
9.2 Fanohanana ny mpanjifa
If you encounter any issues or have questions regarding your INKBIRDPLUS INK-IFT01 Infrared Thermometer, please contact our customer support team. Contact details can typically be found on the INKBIRD official webtoerana na eo amin'ny fonosana vokatra.
Raha mila loharanom-baovao an-tserasera, tsidiho ny: www.inkbird.com
