NEC NP-V260 DLP Projector Instruction Manual

1. Fampidirana

This manual provides essential information for the safe and efficient operation of your NEC NP-V260 DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference. This projector is designed for presenting high-definition content with 2600 ANSI lumens brightness.

2. Fametrahana

2.1 Famoahana sy Votoaty

Carefully remove the projector and all accessories from the packaging. Verify that all components are present:

• NEC NP-V260 DLP Projector
• Tady herinaratra
• Fanaraha-maso lavitra (raha misy)
• User Manual (ity antontan-taratasy ity)

2.2 Fametrahana Projector

Place the projector on a stable, level surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. Maintain a suitable distance from the screen for the desired image size.

2.3 Hery mampifandray

1. Connect the power cord to the projector's AC inlet.
2. Ampifandraiso amin'ny fivoahana elektrika miorim-paka ny tendrony hafa amin'ny tadin-jiro.

2.4 Mampifandray ireo loharano fidirana

The NEC NP-V260 supports various input sources. Connect your device to the appropriate port:

• HDMI: Ho an'ny horonan-tsary sy feo nomerika avo lenta.
• USB: For connecting USB devices or for firmware updates.
• Network (Wired & Wireless): For network control and content streaming, if supported by your model.

2.5 Fahefana voalohany

Press the power button on the projector or remote control to turn on the unit. The power indicator light will change color, and the projector lamp hanazava.

2.6 Fanitsiana ny fifantohana sy ny zoom

This image displays the top panel of the NEC NP-V260 projector. Visible features include the focus and zoom rings on the lens, the NEC logo, a warning label for lamp type NP18LP, and the control panel with menu navigation buttons, source selection, and power button.

Adjust the focus ring around the lens until the projected image is sharp and clear. Use the zoom ring to adjust the image size to fit your screen.

3. Torolàlana miasa

3.1 Fanaraha-maso fototra

The projector features an on-board control panel. The main controls include:

• Bokotra hery: Mamelona na mamono ny projector.
• Bokotra loharano: Cycles through available input sources (HDMI, USB, Network).
• bokotra Menu: Accesses the On-Screen Display (OSD) menu.
• Bokotra Fikarohana (Ambony/Midina/Ankavia/Ankavanana): Used to navigate through OSD menus.
• Bokotra miditra: Confirms selections in the OSD menu.
• Bokotra fivoahana: Exits the current OSD menu or returns to the previous level.

3.2 Navigating the On-Screen Display (OSD)

Tsindrio ny sakafo button to open the OSD. Use the navigation buttons to highlight options and the Ampidiro button to select. Adjust settings such as picture mode, aspect ratio, and keystone correction.

3.3 Fanitsiana ny Fikirana Sary

Within the OSD, navigate to the 'Picture' or 'Image' menu to adjust:

• Famirapiratana: Controls the overall lightness or darkness of the image.
• Mifanohitra: Adjusts the difference between the lightest and darkest parts of the image.
• loko: Manova ny hamafin'ny loko.
• loko: Adjusts the balance between red and green colors (NTSC only).
• Sharpness: Enhances or softens image edges.
• Aspect ratio: Selects the display format (e.g., 4:3, 16:9, Auto).

3.4 Shutting Down the Projector

Press the power button twice (or as indicated by the on-screen prompt) to safely shut down the projector. Allow the projector to cool down completely before unplugging or moving it.

4. Fikojakojana

4.1 Fanadiovana ny Lens

Fafao moramora amin'ny lamba malefaka sy tsy misy loto natao manokana ho an'ny velaran-javatra optika ny family projecteur. Aza mampiasa mpanadio mikikitra na mampiasa hery be loatra.

4.2 Fanadiovana ny sivana rivotra

Regularly clean the air filter to ensure proper ventilation and prevent overheating. Refer to the projector's specific instructions for filter removal and cleaning. A clogged filter can significantly reduce lamp life and projector performance.

4.3 Lamp fanoloana

Ny projector lamp (Type: NP18LP) has a finite lifespan. When the lamp indicator light illuminates or the image becomes dim, it is time to replace the lamp. Always use genuine NEC replacement lamps. Refer to the detailed lamp replacement procedure in the full user manual for safety precautions and steps.

4.4 Fitehirizana

Rehefa tsy ampiasaina mandritra ny fotoana maharitra dia tehirizo ao amin'ny toerana mangatsiaka sy maina ary voaaro amin'ny vovoka sy ny mari-pana tafahoatra ny projecteur. Ampiasao ny fonosana tany am-boalohany na fonony fiarovana raha misy.

5. Famahana olana

If you encounter issues with your projector, consult the following common troubleshooting steps:

• Tsy misy sary: Ensure the power cord is securely connected, the projector is turned on, and the correct input source is selected. Check the connection cable between the projector and the source device.
• Sary manjavozavo: Adjust the focus ring on the lens. Ensure the projector is placed at an appropriate distance from the screen.
• Tsy misy feo: Verify that the audio cable is connected (if using an analog input), the volume is turned up on both the projector and the source device, and the correct audio input is selected. HDMI connections typically carry audio automatically.
• Hafanana tafahoatra amin'ny projecteur: Ensure air vents are not blocked. Clean the air filter. Operate the projector in a well-ventilated area.
• Lamp Mirehitra ny jiro famantarana: This indicates the lamp is nearing its end of life or has failed. Replace the lamp (Type: NP18LP).

For more complex issues, contact NEC customer support or a qualified service technician.

6. Famaritana

7. Warranty sy fanohanana

7.1 Fampahalalana momba ny fiantohana

The NEC NP-V260 DLP Projector is covered by a limited warranty. Please refer to the warranty card included with your product or visit the official NEC webtranokala ho an'ny fepetra sy fepetra amin'ny antsipiriany. Tehirizo ny porofon'ny fividiananao ho an'ny fitakiana fiantohana.

7.2 Fanohanana ny mpanjifa

For technical assistance, service, or further inquiries, please contact NEC customer support. You can find contact information and support resources on the official NEC Display Solutions webtranokala: www.necdisplay.com/support