MeTra MPS-UNDG-KT1 Underglow Kit with Controller
Product Information
The MPS-UNDG-KT1 is an underglow kit that includes six LED tubes and a Heise controller. The controller has the option for turn signal and brake functions, and an RGB controller for speed adjustment and brightness adjustment. The kit comes with 2 clamps for the front and rear tubes, and 4 clamps for the side tubes.
The product is manufactured by MetraOnline.com and has a technical support line at Techsupport@metra-autosound.com or via phone at 368.257.1187.
Product Usage Instructions
- Review the vehicle and locate suitable places to mount the six LED tubes. Avoid locations that are hot, move, pinch points, the gas tank, and gas lines.
- Side tubes get 4 clamps; front and rear tubes get 2 clamps. Try to evenly space the clamps, and do not position the clamp directly over an LED.
- Starting at the controller, connect the left extension (driver side) and route to the front left tube, orientating the tube.
- Mount the tube with supplied hardware, and secure the cable every 12 inches with the included zip-ties.
- Continue to connect the tubes and extensions, matching the flag labels, and mounting the tubes as you go.
- If you want to use the turn signal and brake functions, connect the green wire to the left turn signal (+12VDC), yellow wire to the right turn signal (+12VDC), and white wire to the brake light (+12VDC).
- If you want to use the RGB controller, press and hold for 5 seconds to lock the controller to work only with this remote. (The app control will continue to function.)
- If you want to unlock the controller from the remote, press and hold for 5 seconds.
- If you need technical support, contact the technical support line at 386-257-1187.
Installation Instructions
Review the vehicle and locate suitable places to mount the six LED tubes. Avoid locations that are hot, move, pinch points, the gas tank, and gas lines.
- Side tubes get 4 clamps; front and rear tubes get 2 clamps. Try to evenly space the clamps, and do not position the clamp directly over an LED.
- Starting at the controller connect the left extension (driver side) and route to the front left tube. orientating the tube.
- Mount the tube with supplies hardware, and secure the cable every 12 inches with the included zip-ties.
- Continue to connect the tubes and extensions, matching the flag labels, and mounting the tubes as you go.
Having difficulties?
Contact our tech support line at: Techsupport@metra-autosound.com
Or via phone at:
368.257.1187
RGB Controller:
The controller has the option for turn signal and brake functions. By connecting the following wires, the whip will flash amber with vehicle’s turn signal, and illuminate red when braking.
- Green wire – Left turn signal (+12VDC)
- Yellow wire – Right turn signal (+12VDC)
- White wire – Brake light (+12VDC)
Scan QR code to download HEISE Connect app.
MetraOnline.com
Documents / Resources
 |
MeTra MPS-UNDG-KT1 Underglow Kit with Controller [pdf] Instruction Manual MPS-UNDG-KT1, MPS-UNDG-KT1 Underglow Kit with Controller, MPS-UNDG-KT1 Underglow Kit, Underglow Kit, Underglow Kit with Controller |
