mesqool CR1008iR Digital LED Alarm Clock Instruction Manual

Short press the Set Time Button once, the display will start flashing.
Press the Hour Button to set the hour and the Minute Button to set the minute.
Press the Set Time Button again to save the time, or wait for another 5 seconds for automatic confirmation.

Chapter 5: Night Light

To turn on the Night Light, press the Night Light button.
To switch Night Light color, press the Switch button until you reach the desired color.

To adjust Night Light brightness, press the Adjust button.
To turn off the Night Light, long press the Night Light button for 2 seconds or press it repeatedly until it turns off.

Chapter 6: RGB Display Modes

Press the Multi Color button to switch between RGB display modes. The digits will cycle through 10 available colors.

Chapter 7: Alarm Setting

Make sure the Alarm ON/OFF Slider is towards the left (ON).

Press the Set Alarm Button, the alarm indicator will light up and the display will start flickering.
Press the Hour Button to set the hour and the Minute Button to set the minute.
Press the Set Alarm Button again to save the time, or wait for another 5 seconds for automatic confirmation.

Use the Alarm Volume Slider to adjust the alarm volume (LOW, HIGH, MED).

FAQ

Q: How do I temporarily turn off the alarm when it goes off?

A: Press the Snooze/Light button to temporarily turn off the alarm for 9 minutes.

Contact our experts
support-us@mesqool.com

Digital LED Alarm Clock
CREATE YOUR PERFECT SLEEP ENVIRONMENT

http://www.mesqool.com

Made in China

LOCATION OF CONTROLS

DST Indicator
PM Indicator
AM Indicator

LOW DIMMER Indicator
Alarm Indicator
Buzz Indicator

VIB Indicator
Battery Compartment Cover
DST ON/OFF Slider

Buzz/VIB Slider
Set Time Button
Alarm Volume Slider

Alarm ON/OFF Slider
Set Alarm Button
Multi Color Button

Bed Shaker Port
Type-C Output Charging Port
USB Output Charging Port

DC IN
Speaker
Hour Button/Light Dimmer Button

Minute Button/Display Dimmer Button
SNOOZE/LIGHT Button

PACKAGE LIST

POWERING ON

Connect the power cord to DC IN jack , then plug into a 100~240V AC wall power outlet.
Install 2pcs 1.5V “AAA” size batteries to the proper terminals in the battery compartment to memorize the time setting and the alarm will ring in case of power outage.
NOTE: Batteries (not included) don’t support time display or the night light function.

TIME SETTING

Short press button once, display starts flashing.
Press button to set the hour, press button to set the minute.
Press button to save time, or wait for another 5 seconds to confirm automatically.

Adjust Display Brightness

Press button to adjust the brightness of the digits to your preference.

Switch DST Time

Slide switch button to turn on/off DST function.

Switch 12H/24H Time Format

Hold press button 2S to switch to 12/24H (default 12H)

NIGHT LIGHT

Turn on NIGHT LIGHT
Press button then the night light will turn on.
Switch NIGHT LIGHT Color
When the night light turns on, you can press button to switch to the color as you desire.
The night light colors are as below:
Adjust Night Light Brightness
Press button to adjust the brightness of the night light to your preference
Turn off NIGHT LIGHT
Long press button for 2 seconds or press it repeatedly until the night light turns off.

RGB DISPLAY MODES

Press MULTI COLOR button to switch RGB display modes. The digits will cycle through 10 available colors in the following order: Random Color→RGB Left to Right Flowing→RGB Top Downward Flowing→White→Red→Green→Blue→Ice Blue→Pink→RGB Changing

Notice：When the digits are White, Red, Green, Blue, Ice Blue or Pink, you can set the display to LOW DIMMER modes with less light when sleeping.

ALARM SETTING

Make sure the slide switch button towards the left “ON”.
Press button, the alarm indicator will light up, the display starts flickering.
Press button to set the hour, press button to set the minute.

Press button to save time, or wait for another 5 seconds to confirm automatically.
Slide switch button to adjust alarm volume.

Turn off Alarm

When alarm goes off:

Press button to temporarily turn off alarm for 9 minutes.
Alarm will ring every next 9 minutes.
Press button to turn off alarm for 24 hours.
The alarm indicator is still on, which means alarm is still activated and will ring after 24 hours

To cancel alarm, slide switch button to OFF, alarm indicator will disappear from the display.

OUTPUT CHARGING

Connect your phone or tablet charging cable with the Type-A or the Type-C output charging port on the back of the alarm clock.
The alarm clock can charge both your phone and tablet at the same time.

The maximum charge current is 1Ampere.

BED SHAKER

If you do not plug the bed shaker into the clock,no matter you slide the switch button to VIB or BUZZ/VIB,the clock will have the buzz sound when alarm goes off.

WARRANTY

45-Day Full Refund
If you are unsatisfied with the product or you have any questions about the product, please contact us for a full refund or technical support.
18-Month Warranty
If any quality problems occur within 18 months, please contact us for a replacement or partial refund.

Life-Time Free User Support:
We offer free lifetime user support. Please don’t hesitate to contact us if you have any questions or concerns.

Documents / Resources

mesqool CR1008iR Digital LED Alarm Clock [pdf] Instruction Manual
CR1008iR Digital LED Alarm Clock, CR1008iR, Digital LED Alarm Clock, LED Alarm Clock, Alarm Clock, Clock

References

User Manual

mesqool CR1008iR Digital LED Alarm Clock

Product Information

Product Usage Instructions