MERCUSYS MR62X Wireless Router Installation Guide

Download the MERCUSYS app via the app store or scan the QR
code.
Open the app, log in with your MERCUSYS ID, and follow the
setup instructions to connect to the internet.

Method 2: Via a Web Browser

Connect your device to the router wirelessly or with an
Ethernet cable.
Launch a web browser and enter http://mwlogin.net in the
address bar.

Create a password to log in and follow the step-by-step
instructions to set up the internet connection.

Access Point Mode:

In this mode, the router transforms your existing wired network
to a wireless one.

Power on the router.
Connect the router’s WAN port to your wired router’s Ethernet
port via an Ethernet cable.

Connect a computer to the router via an Ethernet cable or
wirelessly using the SSID and Wireless Password printed on the
label at the bottom of the router.

Frequently Asked Questions (FAQ):

Q1: What should I do if the login window does not appear when
entering http://mwlogin.net?

If the login window does not appear, please check your internet
connection and ensure you are connected to the correct network. You
can also try accessing the login page from a different device or
browser.

“`

View Fullscreen

Quick Installation Guide
Wireless Router
Set up with videos: Visit https://www.mercusys.com/support/ to search for the setup video of your product. For detailed instructions like button and LED description, and advanced features, please visit https://www.mercusys.com/support/ to search for the user manual of your product.
Router mode is the default mode. In this mode, the router connects to the internet and shares the network to wired and wireless devices.

*Images may differ from actual products.

1. Connect the Hardware
If your internet connection is through an Ethernet cable from the wall, connect the Ethernet cable directly to the router’s WAN port, power on the router, and wait for it to start.
If your internet connection comes from a modem (DSL / Cable / Satellite modem), follow the steps below to complete the hardware connection.

Power adapter

Turn off the modem, and remove the backup battery if it has one.

Turn on the modem.

Power adapter

Router

Modem

LAN

WAN

POWER

INTERNET

Connect the modem to the WAN port on your router with an Ethernet cable.

Power on the router, and wait for it to start.

2. Set Up the Network
Method 1: Via MERCUSYS App 1. Download the MERCUSYS app via the app store or scan the QR code.
or
2. Open the app and log in with your MERCUSYS ID.
Note: If you don’t have an account, create one first.
3. Tap LET’S BEGIN and select your device model. Follow the step-by-step instructions to complete the setup and connect to the internet.
Note: The MERCUSYS app support is currently available on some models only. For details, check the Compatibility List at https://www.mercusys.com/faq-650

Method 2: Via a Web Browser
1. Connect your device to the router wirelessly or with an Ethernet cable.
Notes: · The default wireless network names (SSIDs) and password are printed on the label at
the bottom of the router. · Some models do not require a password. Please use the Wi-Fi information on the label
to join the default network. · If you are using a smartphone or tablet, you can also scan the QR code on the product
label to join the preset network directly. Only certain models have QR codes.

AX1500 Dual-Band Wi-Fi 6 Router
Model: MR60X Power: 12V 1A Default Access: mwlogin.net

S/N:XXXXXXXXXXXXXX EU/1.0 MAC:XX-XX-XX-XX-XX-XX

Wireless Password/PIN: XXXXXXXX SSID:MERCUSYS_XXXX SSID:MERCUSYS_XXXX_5G
MERCUSYS TECHNOLOGIES CO., LTD. 3rd Floor, Building R1-B, No. 23, Gaoxin 4th Road, South Hi-Tech Park, Nanshan, Shenzhen, P.R.China

2. Launch a web browser, and enter http://mwlogin.net in the address bar. Create a password to log in.
Note: If the login window does not appear, please refer to FAQ > Q1.
3. Follow the step-by-step instructions to set up the internet connection.
Note: If you are not sure of the Connection Type, please click AUTO DETECT or contact your ISP (Internet Service Provider) for help.
Connect your devices to the router via an Ethernet cable or wirelessly.
Note: If you have changed the SSID and wireless password during the configuration, use the new SSID and wireless password to join the wireless network.

Access Point Mode
In this mode, the router transforms your existing wired network to a wireless one.

Internet

Ethernet1Ethernet2 Ethernet3Ethernet4
Ethernet

Wired Router

LAN

WAN WAN

POWER

Router

Devices

1. Power on the router.
2. Connect the router’s WAN port to your wired router’s Ethernet port via an Ethernet cable as shown above.
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and Wireless Password (if present) printed on the label at the bottom of the router.
4. Launch a web browser and enter http://mwlogin.net in the address bar. Create a password to log in.
5. Go to Advanced > Operation Mode or Advanced > System > Operation Mode to switch to Access Point Mode. Wait for the router to restart.
6. Use http://mwlogin.net to log in to the web management page and follow the step-by-step instructions to set up the internet connection.

Range Extender Mode (if supported)
In this mode, the router boosts the existing wireless coverage in your home. Note: Supported modes may vary by router model and software version.
1. Configure
A. Place the router next to your host router and power it on. B. Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (network name) and Wireless Password (if present) printed on the label at the bottom of the router. C. Launch a web browser and enter http://mwlogin.net in the address bar. Create a password to log in. D. Go to Advanced > Operation Mode or Advanced > System > Operation Mode to switch to Range Extender Mode. Wait for the router to restart. E. Use http://mwlogin.net to log in to the web management page and follow the step-by-step instructions to set up the internet connection.
2. Relocate
Place the router about halfway between your main router and the Wi-Fi dead zone. The location you choose must be within the range of your existing host network.

Main Router

Host Network

LAN

WAN POWER

Router

Extended Network

Devices

WISP Mode (if supported)
In this mode, the router connects to the ISP network wirelessly in areas without wired service. Note: Supported modes may vary by router model and software version.

Public Wi-Fi

LAN

WAN

POWER

Router

Devices

1. Power on the router.
2. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and Wireless Password (if present) printed on the label at the bottom of the router.
3. Launch a web browser and enter http://mwlogin.net in the address bar. Create a password to log in.
4. Go to Advanced > Operation Mode or Advanced > System > Operation Mode to switch to WISP Mode. Wait for the router to restart.
5. Use http://mwlogin.net to log in to the web management page and follow the step-by-step instructions to set up the internet connection.

Button Explanation

Mercusys routers have different buttons, refer to the following explanation to use the button based on your actual model.
If the Reset button and WPS button are two separate buttons on your router:

WPS

Press this button, and immediately press the WPS button on your client device to start the WPS process. The LED of the router should change from blinking to solid on, indicating successful WPS connection.

Press and hold this button for 5 seconds until there is an obvious Reset change in the LED.

If the Reset button and WPS button are the same button on your router:

Reset: Press and hold this button for 5 seconds until there is an obvious change in the LED.

WPS/Reset

WPS:
Press this button, and immediately press the WPS button on your client device to start the WPS process. The LED of the router should change from blinking to solid on, indicating successful WPS connection.

FAQ (Frequently Asked Questions)

Q1. What can I do if the login window does not appear?
· Reboot your router and try again. · If the computer is set to a static IP address, change its settings to obtain an IP
address automatically. · Verify that http://mwlogin.net is correctly entered in the web browser. · Use another web browser and try again. · Disable and enable the network adapter in use again.
Q2. What can I do if I cannot access the internet?
· Reboot your router and try again. · For cable modem users, reboot the modem first. If the problem still exists, log in to
the web management page of the router to clone MAC address. · Check if the internet is working properly by connecting a computer directly to the
modem via an Ethernet cable. If it is not, contact your internet service provider. · Open a web browser, enter http://mwlogin.net and run the Quick Setup again. Q3. What can I do if I forgot my wireless network password?
· Connect to the router via a wired or wireless connection. Log in to the web management page of the router to retrieve or reset your password.
· Refer to FAQ > Q4 to reset the router, and then follow the instructions to configure the router.

Q4. What can I do if I forgot my web management password?
· Log in to the web management page of the router, click Forgot Password, and then follow the instructions on the page to create a password for future logins.
· With the router powered on, press and hold the Reset button on the router for 5 seconds until there is an obvious change in the LED. Wait a few minutes for the resetting and rebooting, and visit http://mwlogin.net to create a new login password.
MERCUSYS hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.mercusys.com/en/ce MERCUSYS hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.mercusys.com/support/ukca/
· Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. · Do not use any other chargers than those recommended. · Do not use damaged charger or USB cable to charge the device. · Do not use the device where wireless devices are not allowed. · Adapter shall be installed near the equipment and shall be easily accessible.
For technical support, replacement services, user guides, and other information, please visit https://www.mercusys.com/support/.

Documents / Resources

MERCUSYS MR62X Wireless Router [pdf] Installation Guide
MR62X, MR60X, MR62X Wireless Router, Wireless Router, Router

References

User Manual

MERCUSYS MR62X Wireless Router Installation Guide

MR62X Wireless Router

Specifications:

Product Usage Instructions:

1. Connect the Hardware:

2. Set Up the Network:

Method 1: Via MERCUSYS App

Method 2: Via a Web Browser

Access Point Mode:

Frequently Asked Questions (FAQ):

Q1: What should I do if the login window does not appear when
entering http://mwlogin.net?

Documents / Resources

References

Leave a comment

Cancel reply