MEE NS1TX Processor Embedded System Instructions

MEE NS1TX Processor Embedded System

PRODUCT OVERVIEW

CHARGING

MODE SELECTION

(Transmitter/Receiver)

BLUETOOTH TRANSMITTER (TX) MODE
Use the Connect Air Pro in TX mode to stream audio from in-flight entertainment systems or other devices with 3.5mm / aux audio output to your AirPods or other Bluetooth headphones or speakers.

BLUETOOTH RECEIVER (RX) MODE
Use the Connect Air Pro in RX mode to stream audio from your phone or tablet to your car / home stereo, wired headphones, or any other audio device with 3.5mm / aux audio input.

BLUETOOTH TRANSMITTER

TX Mode Setup

1. Check that the TX/RX mode switch is in the TX position and power on the Connect Air Pro
2.  Put your headphones/speakers into pairing mode
   AirPods
   Put AirPods in their case and open lid
   Double tap the front or press and hold the button on the back of the case until the light flashes white
   Note: Once paired, the AirPods charging case light will turn solid green or orangeOther Headphones/Speakers
   Consult the user manual of your Bluetooth headphones or speakers for instructions on putting them into pairing mode.
3. Put Connect Air Pro into pairing mode
   Press and hold the O button to put the Connect Air Pro into pairing mode
   Pairing mode is indicated by alternating red and blue lights
   Pairing is complete once the headphone indicator light on the Connect Air Pro turns solid bluePairing a 2nd headphone (optional)
   The Connect Air Pro allows up to two Bluetooth headphones / speakers to be connected at the same time. After connecting the first device, repeat the pairing steps to connect a second.
   Both headphone lights on the Connect Air Pro will be solid blue once the second device is connected.
4. Connect to an audio source
   Plug the Connect Air Pro into an in-flight entertainment system or any other 3.5 mm audio source.
   Increase volume on the audio source first, then use volume controls on your headphones (if available) to adjust volume to a medium-high level.
   Lastly, use the volume controls on the Connect Air Pro for fine adjustment while listening.

CONTROLS

BLUETOOTH RECEIVER

1. Check that the TX/RX mode switch is in the RX position and power on the Connect Air Pro
2. Connect to an audio input
   Connect the audio jack of the Connect Air Pro to your car stereo, home theater receiver, wired headphones, speaker, or other device.Device with 3.5 mm aux input
   Use the included 3.5 mm audio cable.
   Headphones
   Plug your wired headphones into the 3.5 mm audio jack of the Connect Air Pro.
3.  Pair with phone or tablet
   Press and hold the O button to put the Connect Air Pro into pairing mode.
   Pairing mode is indicated by an alternating red and green “RX” indicator light. Open the Bluetooth menu on your phone, tablet, or other device you wish to pair (usually located in Settings->Bluetooth).
   Select “MEE audio Connect Air” and allow pairing to complete.Pairing is complete once the “RX” indicator light on the Connect Air Pro turns solid green

CONTROLS

CinemaEAR
CinemaEAR is an advanced audio enhancement feature that allows for on-the-fly audio adjustment with four different hearing and sound enhancement modes:

• Balanced
  Default mode with balanced audio performance
• Bass Boost Mode
  Enhances bass response and depth to create more impact and immersion with movies and music
• Vocal Boost
  Boosts speech and vocals for more clarity and intelligibility
• Dynamic
  Improves both bass and treble response to make music sound more lively and exciting

TROUBLESHOOTING

Most issues can be solved by a restart and/or a reset of the Connect Air Pro and the connected device.

1. Power off both the Connect Air Pro and the Bluetooth device connected to it. Then, power the Connect Air Pro back on first, followed by the other Bluetooth device.
2. If powering both the Connect Air Pro and the connect Bluetooth device does not resolve the issue, a factory reset can be used to delete all previous Bluetooth pairings from memory.
   Factory reset should be performed for each of the modes (TX/RX) in which you would like to clear the memory.
   TX Mode: While in TX mode, power on the Connect Air Pro, then press the multifunction button 6 times in rapid succession. If successful, you will see both blue lights flash momentarily, after which the Connect Air Pro will enter Bluetooth pairing mode.
   RX Mode: While in RX mode, power on the Connect Air Pro, then press the multifunction button 6 times in rapid succession. If successful, the RX light will flash yellow momentarily, after which the Connect Air Pro will enter Bluetooth pairing mode. If you are unable to power on your Connect Air Pro or the device is unresponsive, you can perform a hardware reset by inserting a pin or paperclip into the reset pinhole on the left side of the device.
3.  If a factory reset of the Connect Air Pro does not resolve the issue, perform a factory reset of the connected device (e.g. your Bluetooth headphones or speaker). Check the user manual of your device for the manufacturer-recommended reset process.

FOR ADDITIONAL SUPPORT

VIEW OUR VIDEO SETUP GUIDE
Scan QR code or enter the URL below into your web browser: MEEaudio.com/CA2vid

QUESTIONS? WE’RE HERE TO HELP!

• Phone Support: 626-965-1008
• Monday ~ Friday 9am to 5:00pm PST
• Email Support: support@MEEaudio.com
• All emails are responded to within 2 business days

WARRANTY

MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, contact your local MEE audio dealer or visit MEEaudio.com/support

SAFETY AND CARE

• Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight.
• The lifetime of the battery will be significantly reduced if your device is not charged for a long time. It is recommended to charge your device at least once a month.
• Clean with a soft, slightly damp cloth. Do not use chemical cleaners. There are no user replaceable/reparable parts in this device. Disassembling it will void your warranty.

WARNINGS
This device is designed and manufactured to operate within its defined design limits. Misuse may result in electric shock or fire. Read and follow these instructions carefully.

• Danger of explosion or fire if batteries are damaged. Never attempt to open the battery for any reason. Do not use the device if it has been crushed, pierced, or otherwise damaged in any way that could compromise the battery. Do not leave the device in any location with excessive heat including naked flames or near heat sources such as radiators and stoves. Do not expose the battery to spark, flame, or salt water.
• Do not charge or use around flammable gasses, liquids, or dust as fire or explosion may occur.
• There are no user replaceable/reparable parts in the device. Disassembling it will void your warranty and may cause personal injury. Changes or modifications to this unit not expressly approved by MEE audio could void the user’s authority to operate the equipment.
• Only use attachments/accessories specified by the manufacturer.

Keep the device and packaging out of reach of children.

FCC INFORMATION

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment! This device complies with Part 15B of the FCC Rules. Operation is subject to the following two conditions:

1. This product may cause harmful interference.
2. This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party .responsible for compliance could void the user’s authority to operate the product.

Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15B of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

DISPOSAL AND RECYCLING
Dispose of this product in accordance with all local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.

MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners. Apple, AirPods, and Siri are registered trademarks of Apple Inc. Google Assistant™ is a trademark of Google Inc.