medion P66400 All In One Audio System Instruction Manual

Safety Instructions
- Ensure to read and follow all safety instructions provided in the manual before operating the device.
Installation
- Choose a suitable location for the device, ensuring proper ventilation and stability.
Repairs
- For any repairs, contact authorized service centers recommended by the manufacturer.
Power Supply
- Connect the device to a power source as per the provided guidelines in the manual.
CD Player
- To use the CD player function, insert the CD into the designated slot and follow the playback instructions.
Battery Handling
- When handling batteries, ensure to follow proper disposal methods and avoid mixing old and new batteries.

FAQs

Q: How do I update the software of the device?
- A: To update the software, navigate to the settings menu and select the software update option.
Q: How do I set the language on the device?
- A: Language settings can be adjusted in the settings menu under the language option.
Q: What are the necessary network requirements for the device?
- A: Refer to section 9.1 in the manual for details on the required network properties.

“`

View Fullscreen

Information about this user manual

Thank you for choosing our product. We hope you enjoy using this device.
Please read the safety instructions and the user manual carefully before using the device for the first time. Note the warnings on the device and in the user manual.
Always keep the user manual close to hand. If you sell the device or give it away, please ensure that you also pass on this user manual. It is an essential component of the product.

1.1. Explanation of symbols
If a block of text is marked with one of the warning symbols listed below, the hazard described in that text must be avoided to prevent the potential consequences described there from occurring.
DANGER!
Warning: risk of fatal injury!
WARNING!
Warning: risk of possible fatal injury and/or serious irreversible injuries!
CAUTION!
Warning: risk of minor and/or moderate injuries!
NOTICE!
Follow the instructions to avoid property damage!
More detailed information about using the device!
Follow the instructions in the user manual!
Due to the 5 GHz frequency range of the wireless LAN solution used, the device may only be used inside buildings in the EU.
WARNING!
Warning: risk of electric shock!
WARNING!
Warning: danger due to loud volume!
CE labelling
Products that feature this symbol meet the requirements of the EU directives (see chapter entitled “Declaration of conformity”).
Protection class II
Electrical devices in protection class II are devices that have double and/or reinforced insulation throughout, and do not have an option for connecting a protective earth. The housing of an electrical device in protection class II, with surrounding insulating material, might either form all of the additional or reinforced insulation, or part of it.
The „Triman“ symbol tells the consumer that the product can be recycled, is covered by an extended system of manufacturer‘s responsibility and must be sorted by material type, in France.

Indoor use
Devices with this symbol are intended solely for indoor use.
Symbol for direct current (DC)
• Bullet point/information on steps during operation
 Instruction to be carried out
 Safety instructions to be observed

Proper use

This device is used for playing audio streamed over the internet or a network. Furthermore, you can also use the device to play back audio files on USB data media and CDs, via Bluetooth® and FM/DAB radio signals.
• The device is only intended for private use and not for industrial/commercial use.
Please note that we shall not be liable in cases of improper use:
• Do not modify the device without our consent and do not use any auxiliary equipment that we have not approved or supplied.
• Only use replacement parts or accessories that we have supplied or approved.
• Comply with all the information in this user manual, especially the safety instructions. Any other use is considered improper and can cause personal injury or property damage.
• Do not use the device in potentially explosive atmospheres. This includes petrol stations, fuel storage areas and areas where solvents are processed. This device must also not be used in areas with particle-laden air (for example, flour or wood dust).
• Do not use the device outdoors.
• Do not expose the device to extreme conditions. Avoid:
– high humidity or wet conditions
– extremely high or low temperatures
– direct sunlight
– naked flames.

Safety instructions

3.1. Operating safety
This device may be used by children over the age of 8 and by persons with limited physical, sensory or mental abilities or by those without experience and knowledge, if they are supervised or have been instructed in the safe use of the device and have understood the dangers that result from it.
• Children should be supervised to ensure they do not play with this device.
• Cleaning and user maintenance may not be carried out by children unless they are supervised.
• Keep the device and accessories out of reach of children.

DANGER!
Risk of choking and suffocation!
Packaging film can be swallowed or used improperly, creating a risk of choking and suffocation.
 Keep packaging material such as plastic film or plastic bags away from children.

3.2. Installation location
• Keep your device and all connected components away from moisture and avoid dust, heat, direct sunlight and naked flames (such as candles, for instance). Non-compliance with these instructions can lead to faults or damage to the display.
• Do not use the device outdoors as it could be damaged by weather such as rain, snow etc.

• Avoid exposing the device and the power pack to water droplets or spray and do not place any liquid-filled containers (vases or similar) on or next to the device or the power pack. Liquids penetrating the device may impair the electrical safety of the product.
• The slots and openings on the device are for ventilation purposes. Do not cover these openings (risk of overheating, fire hazard)!
• Position the cables so that no one can tread on them or trip over them.
• Make sure that there is enough clearance between the device and any surrounding furniture or walls. Ensure a minimum clearance of 10 cm around the device for sufficient ventilation.
• Place and operate all the components on a stable, level and vibration-free surface in order to prevent the device from falling.

3.3. Repairs
• Contact customer services if:
– the mains cable is burnt or damaged
– liquid has penetrated the device
– the device is not operating correctly
– the device has been dropped or the housing is damaged.
• Repairs to your device should only be carried out by qualified specialists.
• If a repair must be carried out, please contact only our authorised service partners.

3.4. Environmental conditions
• The device may only be used and stored in accordance with the environmental conditions specified in the technical data.

DANGER!
Risk of electric shock!
Major changes in temperature or fluctuations in humidity can cause moisture to build up within the device due to condensation – this can cause an electrical short circuit.
 After transporting the device, wait until it has reached ambient temperature before switching it on.

3.5. Power supply
DANGER!
Risk of electric shock!
Even when the mains switch is off, some components of the device are live.
 In order to disconnect the power to your device or to completely isolate the device from voltage sources, remove the mains plug from the socket.
• Operate the device only from a 230 V~, 50 Hz earthed power socket that is close by and easy to access.

System requirements

Basic requirements for the internet radio:
– Broadband internet connection (e.g. DSL)
– WLAN router
Easily control the internet radio using a smartphone/tablet PC:
– Smartphone/tablet with WLAN 802.11 a/b/g/n
– Android™ platform 4 or higher
– iOS® 5.0 or higher
– Free app installed

Package contents

DANGER!
Risk of choking and suffocation!
There is a risk of choking and suffocation due to swallowing or inhaling small parts or plastic wrap.
 Keep the plastic packaging out of the reach of children.
 Remove the product from the packaging and remove all packaging materials.
 Please check your purchase to ensure that all items are included. If anything is missing, please contact us within 14 days of purchase.
The following items are supplied with your product:
• 1 micro audio system
• 1 remote control
• 2 batteries, type 1.5 V R03/LR03/AAA
• Mains cable
• Documentation
• Wire aerial

Device overview

6.1. Front

1) Speaker
2) Infrared sensor for remote control
3) – Switch device on / switch to standby mode
4) – Select operating mode
5) – Short press for station or track information. Long press to open/close
menu; return to previous menu level
6) – Store station; call up stored station
7) VOL/+ – Adjust volume; when menu is open: turn to navigate through the
menu, press to confirm menu selection
8)  – Start/pause playback
9)  – Previous track
10)  – Next track
11) – Eject CD
12) Display
13) CD compartment

6.2. Back

14) Bass reflex port
15) ~AC IN – Connection port for mains cable
16) 0/1– Mains switch
17) – Headphone connection, 3.5 mm stereo jack
18) LINE IN L/R – Connection port for external device (cinch connection)
19) AUX – Connection port for external device (jack connection)
20) USB – Connection port for USB storage medium
21) Connection for DAB/FM wire aerial

6.3. Remote control

22) – Eject CD
23) EQ – Select equaliser mode
24) X – Mute
25) – Store station; call up stored station
26) PMODE – Select playback mode
27)  – Stop playback
BACK – Return to previous menu
28)  – Start/pause playback
SELECT – Confirm selection in menu
PAIR – Start Bluetooth pairing mode
Automatically store stations
29) -/ + – Increase/decrease volume
30) 09 AZ – Number/character buttons
336
31) – Display/set timer
32) SNOOZE – Snooze function
SLEEP – Call up sleep mode
33)  – Fast rewind/play previous track/radio station button –
 – Fast forward/play next track / radio station button +
 – Navigate up/down through the menu
34) – Open/close menu
35) FOLDER/+ – Select folder (CD, USB mode)
36) – Select operating mode
37) INFO – Display radio station information/track information
38) – Switch device on / switch to standby mode

Connections

Before making any connections, unplug the mains plug.
Operating the FM radio:
 Adjust the wire aerial for reception.
Operating the FM/DAB radio:
 Adjust the wire aerial for reception.
Mains connection:  Connect the connector plug to the ~AC IN port and plug the mains plug into a power socket.
AUX:  Connect a 3.5 mm stereo jack cable to the AUX socket to transmit the stereo sound output from the device to other audio devices.
LINE IN:  Connect an RCA cable to the LINE IN socket to play back stereo sound output from other audio devices via the internet radio.
Headset connection:  Connect the 3.5 mm stereo jack plug of the headphones to play back sound from the internet radio via the headphones.
USB port  Connect a USB data medium here to play back audio files on the data medium.

All multimedia devices that can be connected to the corresponding connections of the device must comply with the requirements of the Low Voltage Directive.

7.1. Inserting batteries in the remote control
 Remove the battery compartment cover on the back of the remote control.
 Insert two LR03/AAA/1.5 V batteries in the battery compartment of the remote control. Check the battery polarity (as shown on the bottom of the battery compartment).
 Close the battery compartment.
WARNING!
Risk of explosion!
There is a risk of explosion if the battery is replaced incorrectly.
 Replace batteries only with the same or equivalent type.
The remote control can be damaged by leaking batteries if not used for a longperiod of time!
 Remove the batteries from the remote control if the device is not going to be used for a long period.

Operation in the menus

8.1. Operation using the remote control
All functions can be operated using both the remote control and the buttons on the device. However, some functions can be operated more easily and directly using the remote control:
• enter numbers and characters by pressing the number/character buttons several times
• playback functions for music playback PLAY, STOP, previous /next track , track search.

8.2. Navigation in the menus
 Press and hold the button to call up the main menu for the corresponding mode.
 Turn the /+ dial on the device or use the navigation buttons    on the remote control to navigate through the menus.
 Press the /+ dial or the SELECT button on the remote control to confirm your menu selection.
 Press the button to return to a previous menu level.

9. Confi guration for the internet radio

The radio is registered with the Airable service when it is connected to the internet (see also www.airablenow.com).
• Wirelessly in WLAN mode: The radio’s WiFi antenna receives the signal from your DSL router.
The station list on your internet radio is provided and continually updated free of charge by www.airablenow.com.
If a radio station is unavailable, this can be for various reasons on the part of the radio station operator. However, this does not mean that the device is faulty.
When connecting to internet radio stations, high numbers of requests may lead to temporary delays. Try to establish a connection with the internet service again later.

Using the device for the fi rst time

When using the device for the first time, the language selection dialogue is displayed first.
 Select a language for the internet radio menu and press SELECT on the remote control to confirm your selection.
The internet radio then starts with a message directing you to the website www. medion.com/iradio-privacy on a PC or mobile device to read the privacy policy.
 Press SELECT on the remote control to accept the data protection information.

After this, the setup wizard starts.
 Confirm the prompt SETUP WIZARD. START NOW? with YES to start the
setup wizard.
The setup wizard is displayed (in the previously set language):
If you select NO, you can select in the next window whether the wizard
is to start the next time the device is switched on.
12.1. Setting the time/date
 Set whether to display the time in 12- or 24-hour format.
 Configure whether the time is to be set automatically using the FM reception
(UPDATE FROM FM), automatically using the DAB reception (UPDATE FROM
DAB), automatically via the network (UPDATE FROM NETWORK) or not
updated (NO UPDATE).
If you have selected UPDATE FROM NETWORK, configure your time
zone in the next dialogue window.
 Then configure the automatic setting for summer/winter time to ON or OFF.
 If you have selected the last option (NO UPDATE), proceed as follows to set the
time manually:
The digit position for the day flashes.
 Set the day using  and press SELECT to confirm.
The digit position for the month flashes.
 Set the month using  and press SELECT to confirm.
The digit position for the year flashes.
 Set the year using  and press SELECT to confirm.
The digit position for the hour flashes.
 Set the hour using  and press SELECT to confirm.
The digit position for the minutes flashes.
 Set the minutes using  and press SELECT to confirm.

Documents / Resources

medion P66400 All In One Audio System [pdf] Instruction Manual
MD44200, P66400 All In One Audio System, P66400, All In One Audio System, Audio System, System

References

User Manual

medion P66400 All In One Audio System

Specifications

Product Usage Instructions