MEAN WELL LPV-35 Series 35W Single Output Switching Power Supply
Product Information
| Model | Output Voltage | Rated Current | Rated Power | Ripple & Noise (max.) | Line Regulation | Load Regulation | Efficiency (Typ.) | Working Temperature | Safety Standards |
|---|---|---|---|---|---|---|---|---|---|
| LPV-35-5 | 5V | 5A | 30W | 80mVp-p | – | – | 77% | -30°C to +70°C | UL1310 class 2, CAN/CSA No. 223-M91, BIS IS15885(for LPV-35-12,LPV-35-24 only), IEC62368-1, EAC TP TC 004, IP67, BS EN/EN62368-1 approved |
| LPV-35-12 | 12V | 3A | 36W | 120mVp-p | – | – | 84% | -30°C to +70°C | UL1310 class 2, CAN/CSA No. 223-M91, BIS IS15885(for LPV-35-12,LPV-35-24 only), IEC62368-1, EAC TP TC 004, IP67, BS EN/EN62368-1 approved |
| LPV-35-15 | 15V | 2.4A | 36W | 120mVp-p | – | – | 84% | -30°C to +70°C | UL1310 class 2, CAN/CSA No. 223-M91, BIS IS15885(for LPV-35-12,LPV-35-24 only), IEC62368-1, EAC TP TC 004, IP67, BS EN/EN62368-1 approved |
| LPV-35-24 | 24V | 1.5A | 36W | 150mVp-p | – | – | 85% | -30°C to +70°C | UL1310 class 2, CAN/CSA No. 223-M91, BIS IS15885(for LPV-35-12,LPV-35-24 only), IEC62368-1, EAC TP TC 004, IP67, BS EN/EN62368-1 approved |
| LPV-35-36 | 36V | 1A | 36W | 150mVp-p | – | – | 85% | -30°C to +70°C | UL1310 class 2, CAN/CSA No. 223-M91, BIS IS15885(for LPV-35-12,LPV-35-24 only), IEC62368-1, EAC TP TC 004, IP67, BS EN/EN62368-1 approved |
Product Usage Instructions
To use the LPV-35 series Single Output Switching Power Supply, please follow the instructions below:
- Ensure that the input voltage range is within 90 ~ 264VAC or 127 ~ 370VDC.
- Connect the AC/N (Blue) and AC/L (Brown) wires to the corresponding terminals on the power supply.
- Connect the +V (Red) and -V (Black) wires to the corresponding positive and negative terminals on your device.
- Ensure that the mounting direction is as recommended in the user manual.
- Make sure that the ambient temperature is within the working temperature range of -30°C to +70°C.
- Check that the load does not exceed the rated current and power of the power supply.
- Ensure that the power supply is properly grounded.
- For safety, always follow the safety standards mentioned in the user manual and comply with local electrical regulations.
Features
- Constant voltage design
- Universal AC input / Full range
- Withstand 300VAC surge input for 5 seconds
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- Fully encapsulated with IP67 level (Note.8)
- Fully isolated plastic case
- Class I power unit, no FG
- Class 2 power unit
- Pass LPS
- Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices (Note. 12)
- 100% full load burn-in test
- Low cost, high reliability
- 2 years warranty
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
SPECIFICATION
Mechanical Specification
Case No.975A Unit:mm
Recommend Mounting Direction
Block Diagram
fosc : 65KHz
Downloaded from Arrow.com.
Documents / Resources
 |
MEAN WELL LPV-35 Series 35W Single Output Switching Power Supply [pdf] Owner's Manual LPV-35 Series 35W Single Output Switching Power Supply, LPV-35 Series, 35W Single Output Switching Power Supply, Power Supply |
 |
MEAN WELL LPV-35 Series 35W Single Output Switching Power Supply [pdf] Owner's Manual LPV-35 Series 35W Single Output Switching Power Supply, LPV-35 Series, 35W Single Output Switching Power Supply, Single Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply, Power Supply |
 |
MEAN WELL LPV-35 Series 35W Single Output Switching Power Supply [pdf] Owner's Manual LPV-35 Series 35W Single Output Switching Power Supply, LPV-35 Series, 35W Single Output Switching Power Supply, Single Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply, Power Supply, Supply |
