MEAN WELL HVG-65 Series Constant Voltage Plus Constant Current LED Driver

Specifications

MODEL	DC VOLTAGE	RATED CURRENT	RATED POWER
HVG-65-12	12V	5A	60W

Product Usage Instructions

Installation:

• Ensure the power source is turned off before installation.
• Connect the LED driver to the LED lighting system following the wiring diagram provided in the user manual.

Voltage and Current Adjustment:

• For A-Type drivers, adjust the output voltage using the built-in potentiometer within the specified ranges. For A/AB-Type drivers, adjust the output current within the specified range using the potentiometer.

Setup and Configuration:

• Allow a setup time of 500ms and a rise time of 80ms for 230VAC input. Refer to the manual for specific setup and configuration details based on the input voltage.

Input Power Requirements:

• The LED driver operates within a voltage range of 180VAC to 528VAC and 254VDC to 747VDC. Ensure the input power meets these requirements for proper functionality.

Efficiency and Power Factor:

• The LED driver offers high efficiency ranging from 86.5% to 90% with a power factor of PF0.93 to PF0.98 at different input voltages. Check the power factor characteristic section for more details.

Features

• Wide input range 180 ~ 528VAC
• Constant Voltage + Constant Current mode output
• Metal housing with Class I design
• Built-in active PFC function
• Class 2 power unit
• IP67 / IP65 rating for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off); Timer dimming
• Typical lifetime>50000 hours
• 5 years warranty

Applications

• LED street lighting
• LED high-bay lighting
• Parking space lighting
• LED fishing lamp
• LED greenhouse lighting

GTIN CODE

• MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

HVG-65 series is a 65W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HVG-65 operates from 180~528VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -40°C ~ +80°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVG-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

SPECIFICATION

MODEL		HVG-65-12	HVG-65-15	HVG-65-20	HVG-65-24	HVG-65-30	HVG-65-36	HVG-65-42	HVG-65-48	HVG-65-54
OUTPUT	DC VOLTAGE	12V	15V	20V	24V	30V	36V	42V	48V	54V
	CONSTANT CURRENT REGION Note.4	7.2 ~12V	9 ~ 15V	12 ~ 20V	14.4 ~ 24V	18 ~ 30V	21.6 ~ 36V	25.2 ~ 42V	28.8 ~ 48V	32.4 ~ 54V
	RATED CURRENT	5A	4.3A	3.25A	2.71A	2.17A	1.81A	1.55A	1.36A	1.21A
	RATED POWER	60W	64.5W	65W	65W	65.1W	65.2W	65.1W	65.3W	65.3W
	RIPPLE & NOISE (max.) Note.2	120mVp-p	150mVp-p	150mVp-p	150mVp-p	200mVp-p	200mVp-p	300mVp-p	300mVp-p	300mVp-p
	VOLTAGE ADJ. RANGE	Adjustable for A-Type only (via the built-in potentiometer)
		10.8 ~ 13.5V	13.5 ~ 17V	17 ~ 22V	22 ~ 27V	27 ~ 33V	33 ~ 40V	38 ~ 46V	43 ~ 53V	49 ~ 58V
	CURRENT ADJ. RANGE	Adjustable for A/AB-Type only (via the built-in potentiometer)
		3 ~ 5A	2.58 ~ 4.3A	1.95 ~ 3.25A	1.62 ~ 2.71A	1.3 ~ 2.17A	1.08 ~ 1.81A	0.93 ~ 1.55A	0.81 ~ 1.36A	0.72 ~ 1.21A
	VOLTAGE TOLERANCE Note.3	±2.0%	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.5%	±1.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	500ms, 80ms /230VAC          400ms, 80ms /347VAC, 480VAC
	HOLD UP TIME (Typ.)	16ms / 347VAC           30ms / 480VAC
INPUT	VOLTAGE RANGE            Note.5	180 ~ 528VAC           254VDC ~ 747VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF≧0.98/230VAC, PF≧0.97/277VAC, PF≧0.97/347VAC, PF≧0.93/480VAC @full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
	TOTAL HARMONIC DISTORTION	THD< 20%(@ load≧60%/230VAC, 277VAC, 347VAC; @ load≧75%/480VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
	EFFICIENCY (Typ.)	86.5%	87.5%	88.5%	89%	89%	89.5%	89.5%	90%	90%
	AC CURRENT (Typ.)	0.22A / 347VAC           0.18A / 480VAC
	INRUSH CURRENT (Typ.)	COLD START 25A(twidth=420μs measured at 50% Ipeak) at 480VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER	12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 480VAC
	LEAKAGE CURRENT	<0.75mA / 480VAC
PROTECTION	OVER CURRENT	95 ~ 108%
		Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT	Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	14.4 ~ 16.8V	18 ~ 21V	23 ~ 27V	28 ~ 34V	34 ~ 38V	41 ~ 46V	47 ~ 53V	54 ~ 60V	59 ~ 65V
		Shut down o/p voltage with auto-recovery or re-power on to recovery
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	Tcase=-40 ~ +80℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.	Tcase=+80℃
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 60℃)
	VIBRATION	10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	UL8750(type”HL”), CSA C22.2 No. 250.0-13, EAC TP TC 004, IP65 or IP67 approved
	WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC  I/P-FG:2KVAC  O/P-FG:1.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to EN55015, EN61000-3-2 Class C (@ load≧60%) ; EN61000-3-3, FCC Part 15 Subpart B, EAC TP TC 020
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020
OTHERS	MTBF	2170.5K hrs min.        Telcordia SR-332 (Bellcore) ; 208.0K hrs min.        MIL-HDBK-217F (25℃)
	DIMENSION	189*61.5*36.8mm (L*W*H)
	PACKING	0.77Kg; 18pcs/14.9Kg/0.89CUFT
NOTE	All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25℃ of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance: includes set up tolerance, line regulation and load regulation. Please refer to “DRIVING METHODS OF LED MODULE”. Please refer to “STATIC CHARACTERISTIC” sections for details. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Block Diagram

DRIVING METHODS OF LED MODULE

• This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

DIMMING OPERATION

3 in 1 dimming function (for B/AB-Type)

• Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
• Direct connecting to LEDs is suggested. It is not suitable ‧ to be used with additional drivers.
• Dimming source current from power supply: 100μA (typ.)

Applying additive 0 ~ 10VDC

Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

Applying additive resistance:

Note

1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

CHARACTERISTIC

OUTPUT LOAD vs TEMPERATURE(Note.9)

STATIC CHARACTERISTIC

POWER FACTOR (PF) CHARACTERISTIC

• Tcase at 70℃

TOTAL HARMONIC DISTORTION (THD)

• 48V Model, Tcase at 70℃

EFFICIENCY vs LOAD

HVG-65 series possess superior working efficiency that up to 90% can be reached in field applications.

• 48V Model, Tcase at 70℃

LIFE TIME

MECHANICAL SPECIFICATION

• Case No. 957
• Unit: mm
• Tolerance: ±1

A-Type

B-Type

AB-Type

D-Type

WATERPROOF CONNECTION

Waterproof connector

• Waterproof connector can be assembled on the output cable of HVG-65 to operate in dry/wet/damp or outdoor environment.

Cable Joiner

• CJ04 cable joiner can be purchased independently for user’s own assembly.
• MEAN WELL order No.: CJ04-1, CJ04-2.

MORE INFORMATION

INSTALLATION MANUAL

• Please refer to: http://www.meanwell.com/manual.html

User’s Manual

FAQ

• Q: How many LED units can be connected to a single LED driver?
  • A: The maximum number of PSU units that can be connected on a 16A circuit breaker varies based on the type of circuit breaker and input voltage. Please refer to the manual for specific details.
• Q: Can the output voltage and current be adjusted on all model types?
  • A: The output voltage can be adjusted on A-Type models only, while the output current adjustment is available on A/AB-Type models using the built-in potentiometer.

Documents / Resources

MEAN WELL HVG-65 Series Constant Voltage Plus Constant Current LED Driver [pdf] Owner's Manual HVG-65-12, HVG-65-15, HVG-65-20, HVG-65-24, HVG-65-30, HVG-65-36, HVG-65-42, HVG-65-48, HVG-65-54, HVG-65 Series Constant Voltage Plus Constant Current LED Driver, HVG-65 Series, Constant Voltage Plus Constant Current LED Driver, Constant Current LED Driver, Current LED Driver, LED Driver

References

• User Manual