MEAN WELL HLG-60H-15 Series 60W Constant Voltage Plus Constant Current LED Driver
Features
- Constant Voltage + Constant Current mode output
- Metal housing with class I design
- Built-in active PFC function
- Class 2 power unit
- IP67 / IP65 rating for indoor or outdoor installations
- Function options: output adjustable via potentiometer; 3 in 1 dimming; Timer dimming
- Typical lifetime > 62000 hours
- 7 years warranty
Description
HLG-60H series is a 60W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-60H operates from 90 ~ 305VAC and offers models with different rated voltage ranging between 15V and 54V. Thanks to the high efficiency up to 90.5%, with the fanless design, the entire series is able to operate for -40°C ~ +80°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-60H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
Applications
- LED street lighting
- LED high-bay lighting
- Parking space lighting
- LED fishing lamp
- LED greenhouse lighting
- Type “HL” for use in Class I, Division 2 hazardous (Classified) location.
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
Model Encoding
SPECIFICATION
BLOCK DIAGRAM
DRIVING METHODS OF LED MODULE
This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
DIMMING OPERATION
3 in 1 dimming function (for B/AB-Type)
- Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
- Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
- Dimming source current from power supply: 100μA (typ.)
Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options.
Using a switch and relay can turn ON/OFF the lighting fixture.
OUTPUT LOAD vs TEMPERATURE
(Note 10)
STATIC CHARACTERISTICS
De-rating is needed under low input voltage.
POWER FACTOR(PF) CHARACTERISTIC
48V Model, Tcase at 70℃
EFFICIENCY vs LOAD
HLG-60H series possess superior working efficiency that up to 90.5% can be reached in field applications.
48V Model, Tcase at 70℃
LIFE TIME
MECHANICAL SPECIFICATION
Blank/D-Type
WATERPROOF CONNECTION
Waterproof connector can be assembled on the output cable of HLG-60H to operate in dry/wet/damp or outdoor environment.
CJ04 cable joiner can be purchased independently for user’s own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
FAQ
Q: Can I use this LED driver with input voltages outside the specified range?
A: No, it is recommended to strictly adhere to the input voltage range of 90-305VAC to prevent damage to the LED driver.
Q: How do I know if the LED driver is functioning correctly?
A: Check that the LED module connected to the driver is lighting up as expected. If there are any issues, recheck the installation and adjustments.
Documents / Resources
 |
MEAN WELL HLG-60H-15 Series 60W Constant Voltage Plus Constant Current LED Driver [pdf] Owner's Manual HLG-60H-15 Series 60W Constant Voltage Plus Constant Current LED Driver, HLG-60H-15 Series, 60W Constant Voltage Plus Constant Current LED Driver, Constant Voltage Plus Constant Current LED Driver, Plus Constant Current LED Driver, Current LED Driver, LED Driver, Driver |