MEAN WELL HLG-600H Series Constant Voltage Constant Current LED Driver
FAQs
- Q: What is the difference between IP65 and IP67 ratings?
- A: The IP65 rating protects against dust and low-pressure water jets, while the IP67 rating offers protection against immersion in water up to 1 meter depth for a limited time.
- Q: Can the HLG-600H driver be used with AB-type LEDs?
- A: The HLG-600H driver is compatible with all LED types except for AB-type LEDs. For AB-type LEDs, a different driver is recommended.
FEATURE
- Constant Voltage + Constant Current mode output
- Metal housing with class 1 design
- Standby power consumption <0.5W at remote off
- 1P67 / IP65 rating for indoor or outdoor installations
- Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off)
- Typical lifetime > 62000 hours
- 7 years warranty
Applications
- LED high-bay lighting
- Parking space lighting
- LED fishing lamp
- LED greenhouse lighting
- Type “HL” for use in Class I , Division 2 hazardous (Classified) location.
GTIN CODE
- MW Search: https://www.meanwell.com/serviceGTIN.aspx.
Description
- HLG-600H series is a 600W AC/DC LED driver featuring the dual mode constant voltage and constant current output.
- HLG-600H operates from 90 ~ 305VAC and offers models with different rated voltages ranging between 12V and 54V.
- Thanks to the high efficiency of up to 96%, with the fanless design, the entire series can operate for -40°C ~ +90°C case temperature under free air convection.
- The design of metal housing and IP67/1P65 ingress protection level allows this series to fit both indoor and outdoor applications.
- HLG-600H is equipped with various function options, such as dimming methodologies, to provide the optimal design flexibility for LED lighting systems.
MODEL ENCODING
SPECIFICATION
https://www.meanwell.com/Upload/PDF/LED_EN.pdf.
BLOCK DIAGRAM
DRIVING METHODS OF LED MODULE
- This series is able to work in either Constant Current mode (a direct driveway) or Constant Voltage mode (usually through an additional DC/DC driver) to drive the LEDs.
- In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems.
- Should there be any compatibility issues, please contact MEAN WELL.
- Typical output current normalized by rated current (%)
DIMMING OPERATION
3 in 1 dimming function (for B/AB-Type)
- Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
- ~ 10VDC, or 10V PWM signal or resistance.
- Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
- Dimming source current from power supply: 100uA (typ.)
Applying additive 0 ~ 10VDC
Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
Applying additive resistance:
- (N=driver quantity for synchronized dimming operation)
- Dimming input: Additive resistance
Note:
- Min. dimming level is about 6% and the output current is not defined when 0% < Iout<6%.
- The output current could drop down to 0% when dimming input is about 0k2 or 0Vdc, or 10V PWM signal with 0% duty cycle.
OUTPUT LOAD vs TEMPERATURE
If HLG-600H operates in constant current mode with the rated current, the maximum workable Ta is 55°C.
STATIC CHARACTERISTICS
- De-rating is needed under low input voltage.
POWER FACTOR(PF) CHARACTERISTIC
Tcase at 80°C Constant Current Mode
TOTAL HARMONIC DISTORTION (THD) 48V Model, Tcase at 80°C
EFFICIENCY vs LOAD
HLG-600H series possess superior working efficiency that up to 96% can be reached in field applications. 48V Model, Tcase at 80°C
LIFETIME
MECHANICAL SPECIFICATION
- A-Type
- B-Type
- AB-Type
- Blank-Type
INSTALLATION MANUAL
- Please refer to: http://www.meanwell.com/manual.html.
- Downloaded from Arrow.com.
- File Name: HLG-600H-SPEC 2024-05-20
Documents / Resources
 |
MEAN WELL HLG-600H Series Constant Voltage Constant Current LED Driver [pdf] User Guide HLG-600H Series Constant Voltage Constant Current LED Driver, HLG-600H Series, Constant Voltage Constant Current LED Driver, Voltage Constant Current LED Driver, Constant Current LED Driver, Current LED Driver, LED Driver, Driver |
