HLG-320H Series 320W Constant Voltage
and Constant Current LED Driver
Owner’s Manual
HLG-320H Series 320W Constant Voltage and Constant Current LED Driver
http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf
Features
- Constant Voltage + Constant Current mode output
- Metal housing with class 1 design
- Built-in active PFC function
- IP67 / IP65 rating for indoor or outdoor installations
- Function options: output adjustable via potentiometer; 3-in-1 dimming
- Typical lifetime > 62000 hours
- 7 years warranty
Applications
- LED street lighting
- LED high-bay lighting
- Parking space lighting
- LED fishing lamp
- LED greenhouse lighting
- Type “HL” for use in Class I, Division 2 hazardous (Classified) location.
Description
HLG-320H series is a 320W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-320H operates from 90 – 305VAC and offers models with different rated voltages ranging between 12V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -40°C – +90°C case temperature under free air convection. The design of metal housing and IP67/1P65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-320H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for the LED lighting systems.
Model Encoding
| Type | IP Level | Function | Note |
| Blank | IP67 | to and Vo fixed | In Stock |
| A | IP65 | lo and Vo adjustable through built-in potentiometer | In Stock |
| B | IP67 | 3-in-1 dimming function (1-10VDC, 10V PWM signal and resistance) | In Stock |
| AB | IP65 | Io adjustable through built-in potentiometer & 3-in-1 dimming function (1-10Vdc, 10V PWM signal and resistance) |
In Stock |
| C | IP66 | Terminal block for I/O connection. Output voltage and constant current level can be adjusted through an internal potentiometer. | By request |
| D | IP67 | Timer dimming function, contact MEAN WELL for details(safety pending). | By request |
SPECIFICATION
| Model | 11.6420542 MI | H1G42041-15E | 111.0429142CC | HIG.320042C | 14.0.121:4440C | 111.0- 32011- 60 | 1.0420114C | HLG4201141E | HLG42/AtC | |
| OUTPUT | DC VOLTAGE | 12V | 15V | 20V | 24V | 30V | 36V | 42V | 48V | 54V |
| CONSTMITCURRENT REGION Nom | 6 -12V | 7.5-15V | 10 – 20V | 12 – 24V | 15 – 30V | 18 – 36V | 21 – 42V | 24 – 4W | 27 – 54V | |
| RATED CURRENT | 22A | 19A | 15A | 1334A | 11. | 8.9A | 755A | 6.7A | 595A | |
| RATED POWER | 264W | 285W | 300W | 320.16W | 321W | 320.4W | 321.3W | 321.6W | 321.3W | |
| RIPPLE & NOISE (max.) Note/ | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 250mVpo | 250mVp•p | 250mVp-p | 350mVp-p | |
| VOLTAGE E ADJ. RANGE | Adjust table for A/C- Type only (via bu illt-in potentiometer | |||||||||
| 105 -13.5V | 13.5 – 17V | 17 – 22V | 21 – 26V 26 – 32V 32 – 39V 38-4W 43-52V 49-5W | |||||||
| CURRENT ADJ. RANGE | Adjust table to A/ABJC-Type only (via built potentiometer) | |||||||||
| 11-22A | 9.5-19A | 7.5-15A | 657 -13.34A | 5.35 – 10.7A | 4.45 – 8.9A | 3.8 – 7.65A | 3.35 – 6.7A | 297 – 5.95A | ||
| VOLTAGE TOLERANCE Nob/ | ±3.0% | ±2.0% | ±1.5% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±05% | ±05% | |
| LOAD REGULATION | ±2.0% | ±1.5% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ± 05% | ± 05% | |
| SETUP, RISE TIME Note. | 2500m s,80m s/115VAC 500ms,80ms1230VAC | |||||||||
| HOLD UP TIME (Typ.) | 15ms f 115VAC, 230VAC | |||||||||
| INPUT | VOLTAGE RANGE Not4.5 | 90 – 305VAC 127 – 431VDC (Please refer to the “STATIC CHARACTERISTIC’ section) |
||||||||
| FREQUENCY RANGE | 47 – 63Hz | |||||||||
| POWER FACTOR (Typ.) | PF a0 98/115VAC, PF 20.95230VAC, PF 20.94/277VAC © IS !load (Please refer to TOWER FACTOR (PF) CHARACTERISTIC” sock() | |||||||||
| TOTAL HARMONIC DISTORTION | T HD< 20% (0 load 250% f 115VAC,230VAC; © load 215% I 211VAC) (Plea se rete to ‘TOTAL HARMONIC DISTORTION (THD)” section) | |||||||||
| EFFICIENCY (Typ.) (230Vac) | 91% | 93.% | 935% | 94% | 94% | 95.% | 95% | 95% | 95% | |
| EFFICIENCY (Ty p.) (277 Vac) | 92.% | 93% | 94% | 95.% | 95.% | 95% | 95% | 95% | 95% | |
| AC CURRENT (Tye.) | 3.5A/115VAC 1.65A / 230VAC .45A/277VAC | |||||||||
| INRUSH CURRENT(Typ.) | COLD START 70A(twohz1010fts measured at 50% laa) at 230VAC; Per NE6IA410 | |||||||||
| MAX. No. of PSUs on 164 CIRCUIT BREAKER | 1 unit (circuit breaker of type B)/ 2 units (circuit breaker& type C) at 230VAC | |||||||||
| LEAKAGE CURRENT | <0.75mA f 27 NAC | |||||||||
| PROTECTION | OVER CURRENT Nots.4 | 95-108% | ||||||||
| Constant current Mating recovers automatically after fault calcination is removed | ||||||||||
| SHORT CIRCUIT | Hiccup mode recovers automatically after the fault condition is removed | |||||||||
| OVERVOLTAGE | 14 – 17V 1 17.5 – 21V 1 22.5 – 27V I 27 – 33V I 33 – 37V 1 40- 46V I 46.5-53V I 53.5 – 60V 1 59- 65V | |||||||||
| Shut down and latch off op voltage, re-power on to recover | ||||||||||
| OVER TEMPERATURE | Shut down and latch off op voltage, re-power co to recover | |||||||||
| EP/Nagai | WORKING TEMP. | Ica se: -40 – +90’C (Please refer to “OUTPUT LOAD vs TEMPERATURE” section) | ||||||||
| MAX. CASE TEMP. | These: +90t | |||||||||
| WORKING HUMIDITY | 20-95% RH non-conden Op | |||||||||
| STORAGE TEMP., HUMIDITY | 40 – ’80C, 10 – 95% RH | |||||||||
| TEMP. COEFFICIENT | ±0.03%/t (0- 50t ) | |||||||||
| VIBRATION | 10- 500Hz. 56 12minilcycle. period br 72min. each along X. Y. Z axes | |||||||||
| SAFETY& EMC | SAFETY STANDARDS | UL8750(typell.”), CSA C22.2 No. 250.048; BS EN/EN/AS/NZS 61347-1, BSEN/EN/AS/ICS 61347-2-13 i &Moen:lent GB19510.1,6819510.14; IP65 or P67 (except br HLG-320H C-type); J61347-1, J61347-2-13 (except tor B ABC and D-type), EAC TPTC 004;KC61341-1.KC61347-2-13(excepl tct AB.C4ype) a pprowd | ||||||||
| WITHSTAND VOLTAGE | I/P-0/P:3.75KVAC I/ P-FG:2KVAC 0/P-FG:1.5KVAC | |||||||||
| ISOLATION RESISTANCE | I/P-0/P, I/P-FG, 0/ P-FG:100M Ohms /500VDC / 25t / 70% RH | |||||||||
| EMC EMISSION | Catipiance to BS EN/EN55015, 85 EN/EN55032 (C ISPR32)CI ass B. BS EN1E N61000-3-2 Class C (fp bad 250%); BS EN/EN61000-3-3.GB17743 and GB17625.1.EAC TP TC 020 | |||||||||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,45,58,11, BS EN1EN61547, BS EN1EN55024, igM industry level (surge inmunity Line-Earth 4KV, Lite-Lie 2KV). EAC TPTC 020 | |||||||||
| OTHERS | MTBF | 157.1Khrs min. MIL-HDBK-217F (25‘C ) | ||||||||
| DIMENSION | 252’90’43.8mm (L’1APH) | |||||||||
| PACKING | 1.88Kg; 8pcs/16KgX).92CUFT | |||||||||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25t of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted par-wire terminated with a 0.1uf & 47th parallel capacitor. 3. Tolerance: includes set up tolerate, line regulation, and load regulation. 4. Reese refer to ‘DRIVING METHODS CF LED MODULE’. 5. De-rating may be needed under low input voltages. Please refer to -the STATIC CHARACTERISTIC’ sections for details 6. Length of set up time is measured at first cold start Turning ONVOFF the <Viva may lead b increase of the set up time. 7. The driver is considered as a component that will be operated in combination with the final equipment Since EMC performance will be affected by the complete installation, the In equipment manufacturers must re-family EMC Directive on the complete installation again. 8. To Mill requirements of the latest ErP regulation for lighting fixtures this LED driver can only be used behind a match without being permanent’ connected b the mains 9. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly (D point (or TMP, per DLC), is tout 75t or less. 10. Please refer b the warranty statement on the MEAN WELLS website at . 11. The ambient temperature cleating of 35’C/1000m with farness models and of 5’C/1000m with fan models for operating altitudes higher than 2000m(660011). 12. For any application note and IP waterproof function installation caution, please refer our user manual before using. https://Avww.meanwellann/Upload/PDRLEDEN.pdf X Product Liability Disclaimer: For detailed information, please refer to httpss://Minvwxneersvelloorn/serviceDisdaimer.aspx |
|||||||||
BLOCK DIAGRAM
DRIVING METHODS OF LED MODULE
※ This series is able to work in either Constant Current mode (a direct driveway) or Constant Voltage mode (usually through an additional DC/DC driver) to drive the LEDs.
In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.
DIMMING OPERATION
※ 3 in 1 dimming function (for B/AB-Type)
- Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
- Direct connecting to LEDs is suggested. It is not suitable· to be used with additional drivers.
- Dimming source current from power supply: 1 0 A (Typ.) 0 μ ◎ Applying additive 1 ~ 10VDC
Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options.
Using a switch and relay can turn ON/OFF the lighting fixture.
OUTPUT LOAD vs TEMPERATURE(Note.10)
 |
|
| STATIC CHARACTERISTICS | POWER FACTOR(PF) CHARACTERISTIC |
 |
|
| ※ De-rating is needed under low input voltage. | LOAD |
 |
|
| TOTAL HARMONIC DISTORTION (THD) ※ 48V Model, Tcase at 80℃ |
EFFICIENCY vs LOAD HLG-320H series possess superior working efficiency that up to 95% can be reached in field applications. ※ 48V Model, Tcase at 80℃ |
LIFETIME
MECHANICAL SPECIFICATION
320W Constant Voltage + Constant Current LED Driver
AC Input Terminal Pin No. Assignment
| Pin No. | Assignment |
| 1 | FG |
| 2 | AC/L |
| 3 | AC/N |
DC Output Terminal Pin No. Assignment
| Pin No. | Assignment |
| 1 | +v |
| 2 | -v |
WATERPROOF CONNECTION
※ Waterproof connector.
The waterproof connector can be assembled on the output cable of HLG-320H to operate in dry/wet/damp or outdoor environments.
Please refer to:
http://www.meanwell.com/manual.html
Documents / Resources
 |
MEAN WELL HLG-320H Series 320W Constant Voltage and Constant Current LED Driver [pdf] Owner's Manual HLG-320H Series, 320W Constant Voltage and Constant Current LED Driver, HLG-320H Series 320W Constant Voltage and Constant Current LED Driver, Constant Voltage and Constant Current LED Driver, Constant Current LED Driver, LED Driver |
