MEAN WELL HLG-120H-12 Series Constant Voltage Constant Current LED Driver Owner's Manual

HLG-120H series is a 120W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-120H operates from 90- 305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 93.5%, with the fanless design, the entire series is able to operate for-40°C – +80°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-120H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

Type	IP Level	Function	Note
Blank	IP67	Io and Vo fixed	In Stock
A	IP65	Io and Vo adjustable through built-in potentiometer	In Stock
B	IP67	3 in 1 dimming function (1 ~1 0VDC, 1 0V PWM signal and resistance)	In Stock
AB	IP65	Io and Vo adjustable through built-in potentiometer & 3 in 1 dimming function (1 ~1 0Vdc, 1 0V PWM signal and resistance)	In Stock
D	IP67	Timer dimming function, contact MEAN WELL for details(safety pending).	By request

SPECIFICATION

MODEL		HLG-120H-12 O	HLG-120H-15D	HLG-120H-20O	HLG-120H-24D	HLG-120H-30 D	HLG-120H-36D	HLG-120H-42D	HLG-120H-48O	HLG-120H-54D
OUTPUT	DC VOLTAGE	12V	15V	20V	24V	30V	36V	42V	48V	54V
	CONSTANT CURRENT REGION Note.4	6 -12V	7.5 – 15V	10 – 20V	12 – 24V	15- 30V	18 – 36V	21 ~ 42V	24- 48V	27 – 54V
	RATED CURRENT	10A	8A	6A	5A	4A	3.4A	2.9A	2.5A	2.3A
	RATED POWER	120W	120W	120W	120W	120W	122.4W	121.8W	120W	124.2W
	RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	150mVp-p	150mVp-p	200mVp-p	200mVp-p	200mVp-p	200mVp-p	200mVp-p
	VOLTAGE ADJ. RANGE	Adjustable for A/AB-Type only (via built-in potentiometer)
	VOLTAGE ADJ. RANGE	10.8 ~ 13.5V	13.5~17V	17 – 22V	22 – 27V	27- 33V	33-40V	38 – 46V	43- 53V	49- 58V
	CURRENT ADJ. RANGE	Adjustable for A/AB-Type only (via bu ilt-in potentiometer)
	CURRENT ADJ. RANGE	5 – 10A	4 – 8A	3 – 6A	2.5 – 5A	2 ~4A	1.7 – 3.4A	1.4 – 2.9A	1.2- 2.5A	1.1 – 2.3A
	VOLTAGE TOLERANCE Note.3	±2.5%	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	± 1.0%	± 1.0%	± 1.0%
	LINE REGULATION	±0.5%	± 0.5%	± 0.5%	±0.5%	± 0.5%	± 0.5%	± 0.5%	± 0.5%	± 0.5%
	LOAD REGULATION	±2.0%	±1.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME Note.6	1200ms,50ms/115VAC 500ms,50ms/230VAC
	HOLD UP TIME (Typ.)	12ms / 115VAC,230VAC
INPUT	VOLTAGE RANGE Note.5	90- 305VAC 127 – 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE	47- 63Hz
	POWER FACTOR (Typ.)	PF;;;:;0,98/115VAC, PF;;;:;0,95/230VAC, PF;;;:; 0,93/277VAC@ full load (Please refer to “POWER FACTOR (PF) CHARACTER ISTIC” section)
	TOTAL HARMONIC DISTORTION	THD< 20% (@load;;;:;50% / 115VAC,230VAC; @ load ;;;:; 75% / 277VAC) (Please refer to “TOTAL HARMON IC DISTORTION (THD)” section)
	EFFICIENCY (Typ.)	92%	92%	93%	93%	93%	93%	93%	93.5%	93.5%
	AC CURRENT (Typ.)	1.4A/115VAC 0.6A/ 230VAC 0.55A/277VAC
	INRUSH CURRENT (Typ.)	COLD START 60A(twidth=3 75µs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER	5 units (circuit breaker of type B) / 9 un its (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT	<0.75mA/ 277VAC
PROTECTION	OVER CURRENT	95 – 108%
	OVER CURRENT	Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT	Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	14-17V	18-21V	23 – 27V	28 – 34V	34- 38V	41 -46V	47- 53V	54- 63V	59- 65V
	OVER VOLTAGE	Shut down o/p voltage with auto-recovery or re-power on to recovery
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	Tease= -40- +80°C (Please refer to “OUTPUT LOAD vs TEMPERATURE” sect ion)
	MAX. CASE TEMP.	Tease= +80°C
	WORKING HUMIDITY	20 – 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40- +80°C, 10-95% RH
	TEMP. COEFFICIENT	±0 03%(C (0 – 60°C)
	VIBRATION	10-500Hz, 5G 12m in./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS Note. 8	UL8750 (type”HL”), CSA C22.2 No. 250.0-08, BS EN/EN 61347-1 , BS EN/EN 61347-2-13, AS/NZS 61347-1(except for AB-type) , AS/NZS 61347-2-13 (except for AB-type) independent;GB19510.1,GB 19510.14, IP65 or IP67 , J61347-1, J61347-2-13 (except for B, AB and D-type),BIS IS15885( for 12B,24B,36A,54A only), EAC TP TC 004,KC6 1347-1,KC61347-2-13(except for D-type) approved
	WITHSTAND VOLTAGE	I/P-O/P:3. 75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/ 500VDC / 25″C/ 70% RH
	EMC EMISSION Note.8	Compliance to BS EN/EN55015, BS EN/EN55032 Class B, BS EN/EN61000-3-2 Class C (@ load;;;:; 50%) ; BS EN/EN61000-3-3, GB17743 and GB17625.1, EAC TP TC 020
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN6 1547, BS EN/EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV),EAC TP TC 020
OTHERS	MTBF	2185.8K hrs min. Telcordia SR-332 (Bellcore); 167.1Khrs min. MIL-HDBK-2 17F (25″C)
	DIMENSION	220′ 68′ 38.8mm (L’W’H)
	PACKING	1.12Kg; 12pcs/14.4Kg/0.8CUFT
NOTE	All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25″C of ambient temperature. Ripple & noise are measured at 20 MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance : includes set up tolerance, line regulation and load regulation. Please refer to “DRIVING METHODS OF LED MODULE”. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC ” sections for details. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains. This series meets the typical life expectancy of >62,000 hours of operation when Tease, particularly (tc) point (or TMP, per DLC), is about 75·c or less. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com The ambient temperature derating of 3.5″C/1OOOm with fanless models and of 5°C/1OOOm with fan models for operating altitude higher than 2000m(6500ft). For any application note and IP waterproof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf * Product Liability Disclaimer : For detailed information please refer to httos://www.meanwell.com/serviceDisclaimer.asox

Symbols

Customer Support

Documents / Resources

MEAN WELL HLG-120H-12 Series Constant Voltage Constant Current LED Driver [pdf] Owner's Manual
HLG-120H-12 Constant Voltage Constant Current LED Driver, HLG-120H-12, Constant Voltage Constant Current LED Driver, Constant Current LED Driver, Current LED Driver, LED Driver

References

User Manual

Features

Applications

GTIN CODE

Description