MEAN WELL HEP-600 Series Switching Power Supply for Harsh Environment
Specifications
| MODEL | OUTPUT | RATED CURRENT | RATED POWER | RIPPLE & NOISE (max.) | VOLTAGE ADJ. RANGE | CURRENT ADJ. RANGE | LINE REGULATION | LOAD REGULATION | SETUP, RISE TIME | HOLD UP TIME (Typ.) | VOLTAGE RANGE | FREQUENCY RANGE | POWER FACTOR (Typ.) | EFFICIENCY (Typ.) | AC CURRENT (Typ.) | INRUSH CURRENT(Typ.) | LEAKAGE CURRENT |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HEP-600-12 | 12V | 40A | 480W | 150mVp-p | 10.2 ~ 12.6V | 20 ~ 40A | – | – | 500ms, 80ms at full load 230VAC /115VAC | 15ms at full load 230VAC /115VAC | 85~264VAC(277VAC operational) | 47 ~ 63Hz | PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load |
93% | 7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC | COLD START 70A(twidth=1000s measured at 50% Ipeak) at 230VAC |
2 ~ 5V or Open circuit Power off : Low |
Product Usage Instructions
Description
HEP-600 is a 600W industrial AC/DC power supply featuring the outstanding capability to operate under highly humid, dusty, oily, and high-vibration harsh environment. The entire series is housed with the aluminum case and fully potted with heat-conducted silicone. Thanks to state-of-the-art design, the working efficiency is up to 96%, enabling HEP-600 perfectly work between -40°C and +70°C under free air convection.
Installation
- Ensure the power supply is compatible with your device’s requirements.
- Connect the power supply to a suitable power source following the voltage and current specifications.
Adjustment
Use the internal potentiometer to adjust the current within the specified ranges for your application.
Power On
After installation, power on the switching power supply and verify that it is functioning correctly.
Features
- Universal AC input / Full range (up to 305VAC)
- Built-in active PFC function
- No load power consumption <0.5W at remote OFF
- High efficiency up to 96%
- Fanless design, cooling by free air convection
- -40 ~ +70°C wide operating range
- Aluminum case and filling with heat-conducted glue
- Withstand 10G vibration test
- Output voltage and output current can be adjusted through internal potentiometer
- Protections: Short circuit / Over current / Over voltage / Over temperature
- LED indicator for power on
- Operating altitude up to 5000 meters (Note.7)
- 6 vears warranty
Model Encoding
Applications
- Outdoor telecommunication equipment
- Outdoor electronic signage and billboard
- Petroleum plant or mine shaft facility
Mechanical Specification
Installation Manual
Please refer to: http://www.meanwell.com/manual.html
Safety Precautions
- Avoid exposing the power supply to water or extreme temperatures.
- Do not attempt to modify the power supply unit in any way.
FAQs
Q: Can this power supply be used in outdoor environments?
The power supply is designed for harsh environments, but direct exposure to weather elements should be avoided.
Q: How can I adjust the voltage output of the power supply?
The voltage can be adjusted within the specified ranges using the provided adjustment options.
Documents / Resources
 |
MEAN WELL HEP-600 Series Switching Power Supply for Harsh Environment [pdf] Installation Guide HEP-600-12, HEP-600-15, HEP-600-20, HEP-600-24, HEP-600-30, HEP-600-36, HEP-600-42, HEP-600-48, HEP-600-54, HEP-600 Series Switching Power Supply for Harsh Environment, HEP-600 Series, Switching Power Supply for Harsh Environment, Supply for Harsh Environment, Harsh Environment |