G3 Series Wireless Mouse
“
Product Information
Specifications:
- Brand: MCHOSE
- Model: G3 Series Wireless Mouse
- Connectivity: Wireless (2.4G/BT)
- DPI Levels: 6 default presets (customizable)
- Power Source: Rechargeable battery
Product Usage Instructions
Installation
Charge/Wired Connection:
- Connect the cable to Type-C port of the mouse and plug it into
a USB 2.0 or higher port on the computer. - In 2.4G/BT mode, plugging in the USB cable switches the mouse
to wired mode and charges it simultaneously.
2.4G RF Connection:
- Press the Mode switch button to enter 2.4G connection mode when
Connection indicator 1 lights up. - Connect the USB receiver to the computer, and the mouse is
ready to use.
BT Connection:
- Press the Mode switch button to enter BT2 connection mode when
Connection indicator 2 lights up. - Press and hold the Mode switch button for about 3 seconds to
enter pairing mode. - Search for the device named “G3 Mouse” on your Bluetooth device
and pair it.
Software
To customize DPI, macro settings, update firmware, and more,
download software from here.
DPI Settings
Press the DPI switch button at the bottom of the mouse to cycle
through DPI levels. Customizing and saving DPI levels can be done
using MCHOSE L7 driver software.
Power Indicator
- Red flashing indicator: Charge the mouse immediately.
- Red solid indicator: Charging in progress.
- Green solid indicator: Charging complete.
Frequently Asked Questions (FAQ)
Q: How do I know when to charge the mouse?
A: When the DPI Indicator Light is flashing
red, it indicates that you should charge the mouse promptly.
Q: How many default DPI presets are available?
A: There are 6 default DPI presets available
for selection.
“`
MCHOSE G3 Series Wireless Mouse
User Guide
Overview
7
3
1
2
4
5
6
9 10
8
11
1 Left click button 2 Right click button 3 Mouse wheel 4 Forward button 5 Back button 6 DPI switch button
7 DPI Indicator light 8 Mode switch button 9 Connection
indicator light 10 Power switch 11 Wireless receiver
Installation
Charge/wired connection
– Connect the cable to Type-C port of the mouse, and connect the cable to a USB 2.0(high-speed) or higher port of the computer. – In 2.4G/BT mode, plugging in the USB cable automatically switches the mouse to wired mode and simultaneously charges the mouse.
Installation
2.4G RF connection
– Press [Mode switch button] to enter 2.4G connection mode when [Connection indicator 1] lights up. Connect the USB receiver to the computer and the mouse is ready to use.
Manual pairing dongle (The dongle is default paired) Enter 2.4G connection mode,press the [Mode switch button] simultaneously for about 5 seconds. The Mouse will enter the re-pairing mode and the indicator light flashes. Re-plug the receiver and bring the mouse close to the receiver (within 20cm), and the Indicator light will be off after a successful connection.
Installation
BT connection
– Press [Mode switch button] to enter BT2 connection mode when [Connection indicator 2] lights up. (The method is same for BT2 mode which use [Connection indicator 3])
– Press [Mode switch button] simultaneously for about 3 seconds. The Mouse will enter the pairing mode and the indicator light flashes. Search for the device with the pairing name [G3 Mouse] and pair, the indicator light will be off after the pairing is successful.
Software
To customize DPl, macro settings, update the newest firmware,and more, please download software at https://www.mchose.store/pages/firmware-2
DPI
There are 6 default DPl presets.
Press the [DPI switch] button at the bottom of the mouse to cycle through DPl levels. Customizing and saving DPl levels can be done within MCHOSE L7 driver software.
Factory DPI setting
DPI level Indicator color
400
Red
800
Blue
1600
Green
3200
Yellow
6400
Cyan
12000[1]
Purple
[1] G3 Ultra is equipped a PAW3950 sensor with 42000 DPl in purple light.Power indicator
When the [DPI Indicator Light] is flashing red, please charge the mouse promptly.
The red indicator light is flashing: Please charge immediately.
The red indicator light is on: Charging in progress.
The green indicator light is on: Charging complete
Documents / Resources
 |
MCHOSE G3 Series Wireless Mouse [pdf] User Guide G3 Ultra, G3 Series Wireless Mouse, Wireless Mouse, Mouse |