Minitank Linking Kit
MINItank Linking Kit maze
Installation instructions:
The Maze Linking Kit allows you to connect as many MINItanks together to achieve the desired storage capacity.
1 Drill a 25mm hole in the water tank. There may be locations in the rim of the tank where it is ideal to make the hole.
2 Push the connection tank fitting through the hole and tighten the nut to hold it in place. (See pic 1)
3 Perform steps 1 & 2 on the second tank. (See pic2)
4 The distance between the tanks can be extended by simply using a longer pipe between the tanks. Connect the hose between two water tank connectors. (See pic3)
Documents / Resources
 |
maze Minitank Linking Kit [pdf] Instructions Minitank, Minitank Linking Kit, Linking Kit |
