MAXIM 12228 Library 1-Light Floor Lamp Instruction Manual

Light Source : 1 X E26 Medium Base100W（Not Included）

Made in Vietnam

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
• Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are full tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Contents

Before getting,started,ensure the package contains the following components:

A	Body	x1
B	STEM	x1
C	BASE	x1
D	FELT PAD	x1
E	SHADE	x1
F	SOCKET RING	x1

Assembly Instructions

1. Attach lower section (B) of lamp assembly to base (C) by turning clockwise as shown.
   

Documents / Resources

MAXIM 12228 Library 1-Light Floor Lamp [pdf] Instruction Manual 12228 Library 1-Light Floor Lamp, 12228, Library 1-Light Floor Lamp, 1-Light Floor Lamp, Floor Lamp

References

• User Manual