MAVINEX M05 Multi-Screen Display Setup Wizard

Mac OS:
Mirror Mode
Computer + Display 1
Computer + Display 1 + Display 2 Computer + Display 1 + Display 2 + Display 3Extend Mode
Go to display settings and select extend screen
Computer + Display 1Computer + Display 1 + Display 2 Computer + Display 1 + Display 2 + Display 3Windows:
Duplicate Screen (Mirror Mode)
Go to display settings and select duplicate screen1.0 – Go to display settings and select duplicate screen
Computer + Display 1, Computer + Dis1.1 – Computer + Display 1, Computer + Display 2, Computer + play 2, Computer + Display 3Display 3Computer + Display 1 + Display 2, Computer + Display 2 + Display 3, Computer + Display 1 + Display 3 Computer + Display 1 + Display 2 + Display 3
Note:
The following black screen indicates no output from displayExtend Mode
Go to display settings and select extend screen Displays three monitors as shown below
Extended mode supports three monitors simultaneously. Select the monitors you want to use in display settings. If any external display is unplugged during use the image will automatically revert to displaying on your computer monitor.
Computer + Display 1, Computer + Display 2, Computer + Display 3
Computer + Display 1 + Display 2, Computer + Display 2 + Display 3, Computer + Display 1 + Display 3Computer + Display 1 + Display 2 + Display 3. The following black screen indicates no displayDisplay Resolution:

Notes:

• For a clear, uninterrupted screen display use monitors of the same brand and model
• The resolution on each display may differ depending on the output of the monitor resulting in having to set display and the resolution manually
• Check the resolution of each display in display settings. Set the resolution of each display according to the above table.

Documents / Resources

MAVINEX M05 Multi-Screen Display Setup Wizard [pdf] User Manual M05 Multi-Screen Display Setup Wizard, M05, Multi-Screen Display Setup Wizard

References

• User Manual