matt E EVU-3-63-ISL Three Phase Connection Unit
Product Usage Instructions
Installation
- Ensure the power supply is switched off before installation.
- Choose the appropriate cable entry facility (top or bottom) based on your installation requirements.
- Connect the cables to the terminal with the specified capacity of 50.0mm2.
- Mount the unit securely following the provided dimensions (H x W x D).
Operation
- After installation, switch on the power supply.
- To isolate individual phases, use the 63amp single-phase isolators as needed.
- Monitor the unit during operation for any irregularities.
Maintenance
- Regularly inspect the unit for any signs of damage or wear.
- Keep the unit clean and free from dust accumulation.
- If any faults are detected, contact the manufacturer for assistance.’
Three-phase connection unit with 3 x 63amp single-phase isolators
- The EVU-3-63-ISL from matt:e is a simple, single, dedicated connection unit with built-in O-PEN technology, which allows for the connection of 3 x 63amp single-phase loads to the existing PME earthing facility.
- The unit incorporates a 5 pole isolator with built-in UV release which disconnects all poles including CPC in the event of a fault, manually resettable in line with BS: 7671:2018. Amendment 1: 2020. Regulation 722.411.4.1 (iii)
- The O-PEN technology does not require earth rods or measuring electrodes to function correctly.
Product Features
- Built in O-PEN technology
- Standard mild steel IP4X enclosure
- NO EARTH ELECTRODES REQUIRED
- Phase loss protection
- Built in 5 pole mains isolator with manually resettable UV release
- Standard 1 Year parts warranty
- Simple wire in wire out connection
- With 3 x 63amp double pole isolators
- Designed and Built in the UK
Dimensions and Specifications
Specifications
| Description | Dedicated EV connection centre |
| Input Volts | Nominal input voltage three-phase 400V 50Hz |
| Max Load | 63 amps per phase |
| Cable Entry Facility | Top or bottom |
| Terminal Capacity | Supply 50.0mm2 |
| Dimensions ( H x W x D ) | 380mm x 300mm x 140mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | The matt:e EVU-3-63-ISL is guaranteed for a period of 1 year from the date of purchase. This warranty is limited to the replacement of faulty components only. |
…Simplifying EV connection
t: 01543 227290
- e: info@matt-e.co.uk
- w: www.matt-e.co.uk
- matt:e Ltd, Unit 5 Common Barn Farm Tamworth Road Lichfield WS14 9PX
FAQs
Q: What is the warranty period for the EVU-3-63-ISL?
A: The product is guaranteed for a period of 1 year from the date of purchase. The warranty covers the replacement of faulty components only.
Q: Can I use this unit for single-phase connections?
A: Yes, each isolator in the EVU-3-63-ISL can be used for single-phase connections up to 63 amps.
Q: Is the unit suitable for outdoor installation?
A: The unit features an IP4X ingress protection rating, making it suitable for outdoor installations with protection against solid objects.
Documents / Resources
 |
matt E EVU-3-63-ISL Three Phase Connection Unit [pdf] Owner's Manual EVU-3-63-ISL, EVU-3-63-ISL Three Phase Connection Unit, Three Phase Connection Unit, Phase Connection Unit, Connection Unit, Unit |