matt-E-LOGO

matt E EVU-3-32-R 3 Phase Connection Unit

matt-E-EVU-3-32-R-3-Phase-Connection-Unit-PRODUCT

PRODUCT INFORMATION

  • The EVU-3-32-R from matt:e is a simple, single dedicated connection unit with built-in O-PEN technology, that allows for the connection of 3 x 32amp single-phase charge points to the existing PME earthing facility.
  • The unit incorporates a 5-pole isolator with built-in UV release which disconnects all poles including CPC in the event of a fault, manually resettable in line with BS: 7671:2018.
  • Amendment 1: 2020. Regulation 722.411.4.1 (iii)
  • The O-PEN technology does not require earth rods or measuring electrodes to function correctly.

Product Features

  • Built-in matt:e O-PEN technology
  • Standard mild steel IP4X enclosure
  • NO EARTH ELECTRODES REQUIRED
  • Phase loss protection
  • Built in 5 pole mains isolator with manually resettable UV release
  • Standard 1 Year parts warranty
  • Simple wire in wire-in-wire-out connection
  •  With 3 x 32amp double pole Type A RCBOs
  • Designed and Built in the UK

Dimensions and Specifications

Description Dedicated EV connection centre
Input Volts Nominal input voltage three-phase 400V 50Hz
Max Load 32 amps per phase
Cable Entry Facility Top or bottom
Terminal Capacity In – 50mm2

Out -25mm2

Dimensions ( H x W x D ) 380mm x 300mm x 140mm
Weight Approximately 7kG
Enclosure Mild Steel Powder Coated
Ingress Protection IP4X
Warranty The matt:e EVU-3-32-R is guaranteed for 1 year from the date of purchase. This warranty is limited to the replacement of faulty components only.

Product Usage Instructions

  • Installation:
    • Ensure the power supply is switched off before installation.
    • Connect the unit to a three-phase 400V 50Hz power source.
    • Properly ground the unit for safety.
  • Connecting EV:
    • Identify the appropriate cable entry point (top or bottom).
    • Connect the EV cables to the designated terminals based on their capacity.
    • Ensure a secure connection to prevent any loose wiring.
  • Maintenance:
    • Regularly inspect the unit for any signs of damage or wear.
    • Clean the enclosure with a soft, dry cloth to maintain its appearance.

FAQs

  • Q: What is the warranty period for the EVU-3-32-R?
    • A: The warranty is valid for 1 year from the date of purchase, covering replacement of faulty components.
  • Q: Can this unit be used for single-phase connections?
    • A: No, this unit is designed for three-phase connections only.
  • Q: What is the Ingress Protection rating of the enclosure?
    • A: The enclosure has an IP4X rating, providing protection against solid objects larger than 1mm.

CONTACT INFORMATION

Documents / Resources

matt E EVU-3-32-R 3 Phase Connection Unit [pdf] Instructions
EVU-3-32-R 3 Phase Connection Unit, EVU-3-32-R, 3 Phase Connection Unit, Connection Unit

References

Leave a comment

Your email address will not be published. Required fields are marked *