EVU-1-32-TP-M
Three-phase connection unit with 4 pole 32amp MCB
EVU-1-32-TP-M Three Phase Connection Unit
The EVU-1-32-TP-M from matt:e is simple
single dedicated connection unit with builtin O-PEN technology, that allows for the connection of a 32 amp three-phase EV charge point to the existing PME earthing facility.
The unit incorporates a 5 pole isolator witbuilt-in UV release that disconnects all poles including CPC in the event of a faultmanually resettable in line with BS: 7671 2018 Amendment 1 2020 Regulation 722.411.4.1 (iii)
The O-PEN technology does not require earth rods or measuring electrodes to function correctly
Product Features
- Built in O-PEN technology
- Standard mild steel IP4X enclosure
- NO EARTH ELECTRODES REQUIRED
- Phase loss protection
- Built in 5 pole mains isolator with manually resettable UV releas
- Standard 1 Year parts warranty
- Simple wire in wire out connection
- With 1 x 32amp MCB
- Designed and Built in the UK
Dimensions and Specifications
| Description | Dedicated EV connection centre |
| Input Volts | Nominal input voltage three-phase 400V 50Hz |
| Max Load | 32 amps |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25.0mm2 |
| Dimensions ( H x W x D ) | 380mm x 316mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | The matt:e EVU-1-32-TP-M is guaranteed for a period of 1 year from the date of purchase. This warranty is limited to the replacement of faulty components only. |
…Simplifying EV connection
t: 01543 227290 e: info@matt-e.co.uk w: www.matt-e.co.uk
matt:e Ltd, Unit 5 Common Barn Farm Tamworth Road Lichfield WS14 9PX
Documents / Resources
 |
matt E EVU-1-32-TP-M Three Phase Connection Unit [pdf] Owner's Manual EVU-1-32-TP-M Three Phase Connection Unit, EVU-1-32-TP-M, Three Phase Connection Unit, Connection Unit, Unit |