matt E ARD-6-32-R-SPD Three Phase Connection Unit
Specifications
- Product Name: ARD-6-32-R-SPD
- Description: Three-phase connection unit with auto rest isolator, Type 2 SPD, and 6 x 32A DP Type A RCBOs
- Input Volts: 400V 50Hz 63amps
- Cable Entry Facility: Top and bottom 25mm2
- Terminal Capacity: Dimensions (H x W x D): 550mm x 360mm x 120mm
- Weight: Approximately 7kg
- Enclosure Ingress Protection: Mild Steel Powder Coated IP4X
- Warranty: 1 Year
Product Usage Instructions
- Installation: Follow the provided installation guide to connect the unit properly to the power source.
- Usage: Ensure to switch on the auto rest isolator before using the unit for safety.
- Maintenance: Regularly check for any signs of wear or damage and contact customer service if needed.
Contact Information
- T: 01543 227290 | E: info@matt-e.co.uk | W: www.matt-e.co.uk
- matt:e Ltd, Unit 1 Langley Brook Business Park, Middleton, Tamworth B78 2BP …Simplifying EV connection
The matt:e ARD connection centres with unique 5 pole auto reset device and built in Type 2 SPD.
- Simple to install, dedicated EV connection centres with built in O-PEN® technology that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes.
- Helping to facilitate compliance with BS:7671. 2018 Amendment 2, 2022 Regulation 722.411.4.1.(iii).
Product Features and benefits
- Built in O-PEN® technology
- NO EARTH ELECTRODES REQUIRED
- Helps reduce disruptive and costly groundworks
- Removes the risk of striking buried services
- Simple wire in wire out connection
- Complete with Type 2 SPD
- With 6 x built in 32A Double Pole Type A RCBOs
- Mild steel IP4X enclosure
- Standard 1 Year parts warranty.
Product Overview
Specifications
| Specifications | |
| Input Volts | 400V 50Hz |
| Max Load | 63amps |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25mm2 |
| Dimensions ( H x W x D ) | 550mm x 360mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | 1 Year |
- T: 01543 227290 | E: info@matt-e.co.uk | W: www.matt-e.co.uk
- matt:e Ltd, Unit 1 Langley Brook Business Park, Middleton, Tamworth B78 2BP
FAQs
Q: How do I reset the auto rest isolator?
A: To reset the auto rest isolator, turn it off and then back on after a few seconds to clear any faults.
Q: What is the purpose of Type 2 SPD in the unit?
A: The Type 2 SPD (Surge Protection Device) is designed to protect against power surges and transient voltage spikes.
Documents / Resources
 |
matt E ARD-6-32-R-SPD Three Phase Connection Unit [pdf] User Guide ARD-6-32-R-SPD Three Phase Connection Unit, ARD-6-32-R-SPD, Three Phase Connection Unit, Connection Unit, Unit |