matt-E-logo

matt E ARD-3-32-R Three-Phase Connection Unit

matt0-E-ARD-3-32-R-Three-Phase -Connection-Unit-product

Product Usage Instructions

Installation

  1. Ensure power is switched off before installation.
  2. Mount the ARD connection unit securely in a suitable location.
  3. Connect the input voltage and load cables to the designated terminals.

Operation

  1. Power on the unit and ensure all connections are secure.
  2. In case of a fault, the auto-reset device will automatically restore power once the fault is cleared.

Maintenance

  1. Regularly inspect the unit for any signs of damage or wear.
  2. Clean the unit with a dry cloth to maintain its performance.

Three-phase connection unit with auto rest isolator complete with 3 x 32A 30mA DP Type A RCBOs

Product Information

The matt:e ARD connection centers provide a simple-to-install dedicated EV connection centre, with built in O-PEN® technology, that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes. Helping to facilitate compliance with BS:7671. 2018 Amendment 1, 2020 Regulation 722.411.4.1.(iii). The matt:e ARD connection centers incorporate the unique 5 pole auto reset device that automatically restores power to the load once the fault has cleared.

Product Features and Benefits

  • Built-in O-PEN® technology
  • NO EARTH ELECTRODES REQUIRED
  • Helps reduce disruptive and costly groundwork
  • Removes the risk of striking buried services
  • Simple wire in wire out the connection
  • Phase loss protection
  • 3 x 32A 30mA DP Type A RCBOs
  • Mild steel IP4X enclosure
  • Standard 1 Year parts warranty.

matt0-E-ARD-3-32-R-Three-Phase -Connection-Unit-fig-1

Specifications

Specifications  
Input Volts 400V 50Hz
Max Load 32amps
Cable Entry Facility Top and bottom
Terminal Capacity 25mm2
Dimensions ( H x W x D ) 380mm x 300mm x 120mm
Weight Approximately 7kG
Enclosure Mild Steel Powder Coated
Ingress Protection IP4X
Warranty 1 Year

Contact

FAQ

  • Q: How does the auto-reset feature work?
    • A: The auto reset device restores power to the load automatically once a fault has been cleared, minimizing downtime.
  • Q: What is the warranty period for the product?
    • A: The product comes with a warranty of 1 year from the date of purchase, ensuring peace of mind for users.

Documents / Resources

matt E ARD-3-32-R Three Phase Connection Unit [pdf] Owner's Manual
ARD-3-32-R, ARD-3-32-R Three Phase Connection Unit, ARD-3-32-R, Three Phase Connection Unit, Connection Unit, Unit

References

Leave a comment

Your email address will not be published. Required fields are marked *