matt E ARD-1-32-TP-M-SPD Three Phase Connection Unit
OVERVIEW
The matt:e ARD connection centers with a unique 5 pole auto reset device and built-in Type 2 SPD. Simple to install, dedicated EV connection centers with built-in O-PEN® technology that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes. Helping to facilitate compliance with BS:7671. 2018 Amendment 2, 2022 Regulation 722.411.4.1.(iii).
Product Features and benefits
- Built-in O-PEN® technology
- NO EARTH ELECTRODES REQUIRED
- Helps reduce disruptive and costly groundwork
- Removes the risk of striking buried services
- Simple wire in wire-in-wire-out connection
- Complete with Type 2 SPD
- With built-in 32A TPN MCB
- Mild steel IP4X enclosure
- Standard 1-year parts warranty.
| Specifications | |
| Input Volts | 400V 50Hz |
| Max Load | 32amps |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25mm2 |
| Dimensions ( H x W x D ) | 550mm x 360mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | 1 Year |
Product Usage Instructions
Installation
- Ensure power is switched off before installation.
- Mount the unit securely on a suitable surface.
- Connect the cables to the designated terminals as per the manual.
Operation
- To activate the unit, turn on the auto-reset isolator.
- The Type 2 SPD provides surge protection for connected devices.
- Monitor the unit for any abnormal behavior or warning indicators.
Maintenance
- Regularly inspect the unit for any signs of damage or wear.
- Clean the unit with a dry cloth to remove dust or debris.
- Contact a qualified technician for any repairs or servicing needs.
Frequently Asked Questions
Q: What is the purpose of the auto-reset isolator?
A: The auto reset isolator helps automatically disconnect power in case of an electrical fault, providing added safety.
Q: How does the Type 2 SPD benefit my devices?
A: The Type 2 SPD offers surge protection, safeguarding connected devices from electrical spikes and surges.
Q: How do I know if the unit is functioning properly?
A: Check for indicator lights or refer to the user manual for any warning signs that may indicate malfunction.
Documents / Resources
 |
matt E ARD-1-32-TP-M-SPD Three Phase Connection Unit [pdf] Instruction Manual ARD-1-32-TP-M-SPD Three Phase Connection Unit, ARD-1-32-TP-M-SPD, Three Phase Connection Unit, Phase Connection Unit, Connection Unit |