ARD-1-32 MCB Connection Unit
“
Product Specifications:
- Input: 400V 50Hz
- Max Load: 32A
- Cable Entry: Top and bottom
- Facility: Terminal Capacity
- Terminal Capacity: 25mm2
- Dimensions (H x W x D): 550mm x 360mm x
120mm - Weight: Approximately 7kg
- Enclosure: Mild Steel Powder Coated
- Ingress Protection: IP4X
- Warranty: 1 Year
Product Usage Instructions:
- Step 1 – Cable Entry: Locate the top and
bottom cable entry points on the unit. - Step 2 – Connection: Connect the input cable
to the terminal with a capacity of 25mm2. - Step 3 – Power On: Ensure the main power
supply is off before connecting the load. - Step 4 – Load Connection: Connect the load to
the appropriate terminals based on the load requirements. - Step 5 – Reset Device: In case of overload or
surge, the auto reset isolator will automatically reset. Check for
proper functioning after reset.
Frequently Asked Questions (FAQ):
Q: How do I know if the Type 2 SPD is functioning
correctly?
A: The Type 2 SPD built into the unit has indicator lights that
show its status. Green light indicates normal operation, while red
light indicates a fault or surge protection activation.
Q: Can this unit be used for Electric Vehicle (EV)
charging?
A: Yes, this unit is designed to simplify EV connection and is
compliant with relevant regulations for EV charging
installations.
Q: What should I do in case of a warranty claim?
A: In case of any issues within the warranty period, please
contact matt:e Ltd using the provided contact information for
support and warranty claims.
“`
ARD-1-32-TP-M-SPD
Three-phase connection unit with auto rest isolator, Type 2 SPD, and 1 x 32A TPN MCB
The matt:e ARD connection centres with unique 5 pole auto reset device and built in Type 2 SPD.
Simple to install, dedicated EV connection centres with built in O-PEN® technology that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes.
Helping to facilitate compliance with BS:7671. 2018 Amendment 2, 2022 Regulation 722.411.4.1.(iii).
Product Features and benefits · Built in O-PEN® technology · NO EARTH ELECTRODES REQUIRED · Helps reduce disruptive and costly groundworks · Removes the risk of striking buried services · Simple wire in wire out connection · Complete with Type 2 SPD · With built in 32A TPN MCB · Mild steel IP4X enclosure · Standard 1 Year parts warranty.
Specifications Input Volts Max Load Cable Entry Facility Terminal Capacity Dimensions ( H x W x D ) Weight Enclosure Ingress Protection Warranty
400V 50Hz 32amps Top and bottom 25mm2 550mm x 360mm x 120mm Approximately 7kG Mild Steel Powder Coated IP4X 1 Year
T: 01543 227290 | E: info@matt-e.co.uk | W: www.matt-e.co.uk matt:e Ltd, Unit 1 Langley Brook Business Park, Middleton, Tamworth B78 2BP
…Simplifying EV connection
Documents / Resources
 |
matt E ARD-1-32 MCB Connection Unit [pdf] Owner's Manual ARD-1-32-TP-M-SPD, ARD-1-32 MCB Connection Unit, MCB Connection Unit, Connection Unit |