ARD-1-100-TP-SPD
Three-phase connection unit with auto rest isolator, for 1 x 100A TPN load with Type 2 SPD,
The matt:e ARD connection centres with unique 5 pole auto reset device and built in Type 2 SPD.
Simple to install, dedicated EV connection centres with built in O-PEN® technology that allows for the connection of EV charge points to the PME earthingfacility without the use of earth electrodes.
Helping to facilitate compliance with BS:7671. 2018 Amendment 2, 2022 Regulation 722.411.4.1.(iii).
Product Features and benefits
- Built in O-PEN® technology
- NO EARTH ELECTRODES REQUIRED
- Helps reduce disruptive and costly groundworks
- Removes the risk of striking buried services
- Simple wire in wire out connection
- Complete with Type 2 SPD
- Mild steel IP4X enclosure
- Standard 1 Year parts warranty.
Specifications
| Input Volts | 400V 50Hz |
| Max Load | 100amps |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25mm² |
| Dimensions ( H x W x D ) | 550mm x 360mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | 1 Year |
…Simplifying EV connection
T: 01543 227290 | E: info@matt-e.co.uk | W: www.matt-e.co.uk matt:e Ltd, Unit 1 Langley Brook Business Park, Middleton, Tamworth B78 2BP
Documents / Resources
 |
matt E ARD-1-100-TP-SPD Three Phase Connection Unit [pdf] Owner's Manual ARD-1-100-TP-SPD Three Phase Connection Unit, ARD-1-100-TP-SPD, Three Phase Connection Unit, Connection Unit, Unit |