MATCO TOOLS CUS-121619-1 Maximus Vehicle Communication Interface
Product Information
Specifications:
- Model: CUS-051123-1
- Version: v3
- Operating System Compatibility: Windows 10 and newer
- Support: J2534 and Device Support
Product Usage Instructions
Activation and Setup:
- Connect your PC to the internet for activation before using the device.
- Visit https://www.opusivs.com/support/downloads/matco-tools to download and run the application setup.
- Connect the device to your PC first, and then attach the OBDII Cable to the device.
Contact Information for Support:
Contact Opus IVS Support for J2534 and Device Support:
734-222-5228 (Option 2, then 1)
Email: support@opusivs.com
*Note: The device has been tested on Windows 10 and newer operating systems. Legacy operating systems may work, but are not officially supported.
FAQ
Q: What should I do if I encounter issues with device setup?
A: If you encounter any issues with setting up the device, please contact Opus IVS Support for assistance via phone at 734-222-5228 or email at support@opusivs.com.
Quick Start Guide
- Connect PC to internet.
Activation required before use of device. - Go to https://www.opusivs.com/support/downloads/matco-tools to download and run application setup*.
- Connect device to PC first.
Then connect the OBDII Cable to the device. - Once Windows has finished installing the application, follow on–screen instructions to activate device.
Contact Opus IVS Support for J2534 and Device Support:
- 734-222-5228 (Option 2, then 1)
- support@opusivs.com
* Device has been tested on Windows 10 and newer operating systems.
Legacy operating systems may work, but are not supported.
CUS-051123-1 v3
Documents / Resources
 |
MATCO TOOLS CUS-121619-1 Maximus Vehicle Communication Interface [pdf] User Guide CUS-121619-1 Maximus Vehicle Communication Interface, CUS-121619-1, Maximus Vehicle Communication Interface, Vehicle Communication Interface, Communication Interface, Interface |