Masterbuilt 9904190036 iFire Controller for Master Built Gravity

Product Information

Specifications:

• Product Name: Controller for Masterbuilt Gravity series
• Model Compatibility: 800, 1050, 560
• Features: Power ON/Off, Set Temperature, Set Time, Meat Probe Temperatures, Boosting Mode

Product Usage Instructions

Set Time – Countdown Timer:

1. Press button
2. Turn knob to desired hours
3. Press button to set hours
4. Turn knob to desired minutes
5. Press button to set minutes. The timer will start
6. Press button to pause and resume timer
7. Press and hold button to reset timer

Set Time – Count Up Timer:

1. Press and hold button
2. Timer will begin counting up from 00:00. Timer will count by Minutes:Seconds and then Hours:Minutes
3. Press button to pause and resume timer
4. Press and hold button to reset timer

Set Meat Probe Temperatures:

1. Press button and turn knob to select meat probe (MP1, MP2, MP3, MP4). Press button again
2. Press temperature button

Boosting Mode:
For Model 800 and 1050, press the button once to activate boost mode and accelerate temperature. Press again to cancel.

Viewing Information on Display:
Turning the knob will advance the display through grill temperature, timer, and meat probes (MP1, MP2, MP3, MP4).

PRODUCT OVERVIEW

BUTTON FUNCTION

Power ON/Off Controller:

1. Press button to power controller ON
2. Press and hold button to power controller OFF

Set Temperature:

1. Press button.
2. Turn knob to desired temperature
3. Press button again to set temperature
   (Time will automatically set after 3 seconds.)

Set Temperature From Fº to Cº :

1. With power off, hold set temp button
2. Press power button
3. Unit powers up with “F” or “C” flashing on display
4. Use knob to select temp unit
5. Press set temp to confirm

Set Time: 

• Countdown Timer
  1. Press button
  2. Turn knob to desired hours
  3. Press button to set hours
  4. Turn knob to desired minutes
  5. Press button to set minutes. The timer will start
  6. Press button to pause and resume timer
  7. Press and hold button to reset timer
• Count Up Timer
  1. Press and hold button
  2. Timer will begin counting up from 00:00. Timer will count by Minutes:Seconds and then Hours:Minutes
  3. Press button to pause and resume timer
  4. Press and hold button to reset timer

Set Meat Probe Temperatures:

1. Press button and turn knob to select meat probe (MP1, MP2, MP3, MP4). Press button again
2. Press temperature button
3. Turn knob to desired temperature
4. Press temperature button again to set the temperature
   (If meat probe reaches 300°F, an alarm will sound and the meat probe must be removed from heat and given time to cool. Meat probe will be damaged if left at this temperature.)

NOTE: Meat probe icon will flash while in setting mode.

Boosting Mode:

On Model 800 and 1050 you will find it take a little bit more time to reach the target temperature. You can sigle press the button to activate the boost mode to accelerate and press it again to cancel

NOTE: When you have the Model 560, this feature is too powerful to lead a huge rush of temperature.

Viewing Information on Display:
Turning the knob will advance the display through grill temperature, timer and meat probes; MP1, MP2, MP3 and MP4

Troubleshooting:

Documents / Resources

Masterbuilt 9904190036 iFire Controller for Master Built Gravity [pdf] Instruction Manual 800, 1050, 560, 9904190036 iFire Controller for Master Built Gravity, 9904190036, iFire Controller for Master Built Gravity, for Master Built Gravity, Master Built Gravity, Built Gravity

References

• User Manual