MASTECH MS6300 Multi-Functions Environment Tester
Contents
Special attention should be paid when using the test and measurement instrument because the improper usage may cause electric shock and damage the equipment. – Use proper measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Any element of which the insulation is deteriorated (even partially), replace them with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring current, make sure the instrument fuses available and disconnect the power supply to the circuit test
- Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.
battery
how to connect
RH%
DB
LUX
SPEED
AIRFLOW
Specifications
MGL AMERICA, INC.
2810 Coliseum Centre Drive,
Ste. 100 Charlotte,
North Carolina 28217 USA
Tel: +1 833-533-5899
Email: cs.na@mgl-intl.com
Documents / Resources
 |
MASTECH MS6300 Multi-Functions Environment Tester [pdf] User Guide MS6300, Multi-Functions Environment Tester |
 |
Mastech MS6300 Multi Functions Environment Tester [pdf] User Manual MS6300 Multi Functions Environment Tester, MS6300, Multi Functions Environment Tester, Environment Tester, Tester |
