Quick Start Guide
MS2009C
Digital Clamp Meter
700019196 April 2021 Rev. 1
Specifications are subject to change without notification.
Special attention should be paid when using the test and measurement instrument because improper usage may cause electric shock and damage the equipment.
– Use proper measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
– Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
– When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
– Examine the measuring test leads (if present) before use. Any element of which the insulation deteriorates (even partially), replace them with proper functional test leads.
– Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
– Before measuring current, make sure the instrument fuses available and disconnect the power supply to the circuit test
– Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.
Contents
Specifications
| Range | Resolution | Accuracy | |
 |
600mV/6V/60V 600V |
0.1mV/0.001V/0.01V 1V |
±(1.0%+10) ±(1.2%+10) |
 |
600mV/6V/60V 600V |
0.1mV/0.001V/0.01V 1V |
±(0.8%+2) ±(1.0%+2) |
 |
6A/60A/600A | 0.001A/0.01A/0.1A | ±(2.5%+10) |
|
600Ω/6kΩ/60kΩ/600kΩ/6MΩ 60MΩ | 0.1Ω/0.001kΩ/0.01kΩ/0.1kΩ/1kΩ 0.01MΩ | ±(1.2%+2) ±(2.0%+2) |
|
10nF/100nF/1000nF/ 10µF/100µF/1000µF 10mF/60mF |
0.001nF/0.01nF/0.1nF 1nF/10nF/100nF 10µF |
±(3.0%+10) ±(3.0%+10) ±(4.0%+10) |
|
100Hz/1kHz | 0.01Hz/0.1Hz | ±(1.5%+5) |
|
0.5%~99% | 0.1% | ±(1.5%+15) |
 |
-20 ℃~1000 ℃ -4 ℉~1832 ℉ |
1℃ 1℉ |
±(2.0%+2) ±(2.0%+4) |
http://www.mastech-group.com/support.php?n=0
USA
MGL AMERICA, INC.
2810 Coliseum Centre Drive,
Ste. 100 Charlotte,
North Carolina 28217 USA
Tel: +1 833-533-5899
Email: cs.na@mgl-intl.com
CAT III 600V
1 YEAR LIMITED WARRANTY
Documents / Resources
 |
MASTECH MS2009C Digital Clamp Meter [pdf] User Guide MS2009C Digital Clamp Meter, MS2009C, Digital Clamp Meter |
