Marshall Emberton II Portable Bluetooth Speaker
Specifications
- Product Dimensions
2.75 x 6.25 x 2.75 inches - Item Weight
4.2 ounces - Batteries
1 Lithium Ion batteries - Speaker Type
Portable Bluetooth - Connectivity Technology
Bluetooth - Special Feature
Waterproof - Brand
Marshall
Introduction
The Emberton II is a small, portable speaker by Marshall that produces powerful, colorful sound. The familiar and beloved heavy Marshall sound is brought to you by two 2″ full range speakers and two passive radiators. True Stereophonic, a special type of multi-directional sound from Marshall, lets you experience a complete 360° sound, where every point is a sweet spot. The Emberton II exceeds most speakers in its class and creates a sound that is significantly larger than its size by isolating the spatial content of stereo recordings. Connect your speaker to additional Emberton II speakers to increase the volume of your sound in a multi-speaker Stack Mode session. You may enjoy Marshall’s outstanding sound for many hours thanks to its 30+ hours of playback. This portable speaker is strong and durable.
It is a must-have for any event because it is incredibly robust, weighs only 0.7 kg (1.5 lbs), and is simple to use. Emberton II won’t let rain or dirt interfere with your music because it has an IP67 grade for dust and water protection. Signature features like the robust metal grille and recognizable Marshall writing evoke the tradition of the rock ‘n’ roll you know and love. The textured silicone sleeve harkens back to the vintage vinyl that covered the original amplifiers.
DEVICE LAYOUT
GENERAL
BLUETOOTH BUTTON
Push and hold the Bluetooth® button until the LED turns to a slow red pulse to start pairing mode.
CONTROL KNOB
- Push and hold for 2 seconds to turn on/off.
- Push once to play/pause.
- Push right/left to skip forward/back.
- Hold right/left to fast forward/rewind.
- Hold upwards/downwards to adjust the volume
BATTERY INDICATOR
The 10-segment Battery indicator shows the battery charge with a steady light and a rising animation indicates charging.
USB-C POWER INPUT
Charge the speaker by plugging it into a USB power source.
INSTRUCTIONS
BLUETOOTH PAIRING
- Push and hold the control knob until the speaker turns on.
- Push and hold the Bluetooth button until the LED turns to a slow red pulse.
- Select EMBERTON II from your audio device’s Bluetooth list
PERFORMING A FACTORY RESET
A factory reset will reset the speaker to its original settings, excluding any firmware updates.
Note
This will delete all user settings and the speaker will need to be set up again.
- Ensure that the speaker is on.
- Push and hold the Bluetooth button for 7 seconds. All indicators turn off and the speaker restarts.
- Remove EMBERTON II from your audio device’s Bluetooth list before pairing again.
MARSHALL BLUETOOTH APP
Download the Marshall Bluetooth app to get the most out of your speaker and keep it up to date with the latest software.
STACK MODE
Connect two or more Emberton II speakers in a Stack session for a bigger sound. Play anything on the main speaker and all speakers in the session will play in sync. You can adjust the volume on any individual speaker for the perfect balance.
MAIN SPEAKER
Triple press the Bluetooth button to start or end a Stack session. The LED starts to blink until any other speaker joins the session.
ADDITIONAL SPEAKER
Double press the Bluetooth button on any speaker you want to add to the session. The LED starts to blink until the speaker has joined a session. While in a session, the speaker will disconnect from any previously connected audio device and will try to reconnect after leaving the session.
To remove a speaker from the session, double press the Bluetooth button on that speaker.
TROUBLESHOOTING
Frequently Asked Questions
Excellent Bluetooth connectivity is provided by the Marshall Emberton Bluetooth speaker. It is simple to switch between various audio sources thanks to its ability to pair with up to two devices simultaneously.
Yes, you may use it as it charges.
Amazing battery life is provided. Marshall claims that the game can be played for 20 hours, and while I didn’t time it myself, it seems about right. It takes three hours to fully recharge when you actually need to use it. However, if you want a quick charge, it will take 20 minutes to get 5 hours of fun.
Marshall’s True Stereophonic, a special type of multi-directional sound, is used by Emberton. Experience true 360-degree sound, where each location has a sweet spot. You may enjoy Marshall’s outstanding sound for many hours thanks to its 20+ hours of playback.
To charge the battery, connect the speaker to a power source using the provided USB cord. When the battery indicator stops blinking, the battery is fully charged.
Marshall Emberton is more than suitable for use in the shower thanks to its IPX7 waterproof rating.
In terms of what it can’t accomplish, the lack of a microphone means you must unplug your Bluetooth-connected phone in order to answer calls. The lack of voice assistant functionality on the Emberton is another consequence, which may or may not concern you.
For a larger sound, connect two or more Emberton II speakers to a Stack session. Any sound played on the primary speaker will be synchronized with all other speakers in the room. For the ideal balance, you can change the volume on each individual speaker.
If your TV has Bluetooth, RCA, or 3.5 mm auxiliary outputs, the Stanmore Bluetooth Speaker can connect to it.
Yes, you can turn off the speaker’s on/off feature in the Marshall Bluetooth app by selecting the three dots to the right of the speaker’s name, and choosing sounds.
By connecting to each speaker using the Marshall Bluetooth App, you can couple two speakers.
Video
