MARS GAMING MCA-GCBPRO GPU Support
Specifications
- Size: 100x40x140mm / 114g
- SPCC: 1mm
Installation
GPU in horizontal position
STEP 1
STEP 2
STEP 3
GPU in vertical position
STEP 1
STEP 2
STEP 3
Safety Recommendations and Reminders
- Keep children away from the product.
- Unplug the computer’s power cord before installation.
- Ensure that the bracket does not interfere with other components or cables inside the housing.
- Do not modify the bracket or use it for purposes other than those specified.
- Important Notice: If you notice any damage or irregularities in the product, please do not proceed with the installation and contact our customer service immediately.
Troubleshooting
Make sure that the graphics card bracket is properly adjusted, does not interfere with other components, the support feet are attached to the case and the fixing screw is tightened securely. Make sure that the graphics card is well supported and leveled.
Warranty
Your original purchase receipt will be required to make use of the warranty service. Keep it in a safe place. Device tampering, technical modifications of any kind, and damage due to external mechanical forces will void your warranty. To read the warranty terms and conditions, go to es.marsgaming.eu/es/terms.
Compliance
You can consult the European Union Declaration of Conformity for the product at www.marsgaming.eu/en/conformity. For more information, visit www.marsga-minq.eu.
MARSGAMING Biomag S. L.
EU office
- Address: Barratxi 39, Pab. 3 01013, Vitoria, SPAIN
- Telephone: +34945124598
- Email: attcliente@biomag.es
- Website: www.MARSGAMING.EU
Documents / Resources
 |
MARS GAMING MCA-GCBPRO GPU Support [pdf] Instruction Manual MCAGCBPRO, MCAGCBPROW, MCA-GCBPRO GPU Support, MCA-GCBPRO, GPU Support, Support |