MARKLIFE X2 Printer Owner’s Manual

MARKLIFE X2 Printer

App in stall

If your printer compatible with bluetooth and computer. The APP Download & Bluetooth Connection as below:

1. Scan the QR Code to download the APP.
2. Find “Marklife” on Google Play Or App Store.

Bluetooth Connection Steps:
Make sure Bluetooth is enabled-Open APP and click “UNLINK” in the upper left comer-Find printer model and use the printer according to the instruction.

Caution: Do not search for the printer to be connected in the Bluetooth settings of your mobile phone.

Packing list

Basic Introduction

1. Step 1 .Open the paper bin cover
2. Step 2 . Take a roll of paper and install it correctly inside the printer.

APP connection

Do Not Pair Bluetooth From Setting!

Note

1. Turn on phone Bluetooth;
2. 0pen APP printer.

Create label

Note: The label size selected in the APP must be consistent with the label in the printer. (Label in the machine: 40mm*30mm) If you use unofficial gap paper, on the home page of the APP, Click”Great Label ” -“Ga

App Scan To Get Template

For gap paper, click the “San” of the APP to read the barcode identification template on the label, enter the editing page to edit the content and print.

Edit label content and print

• Double click “Double click Edit” to edit your text you can drag the text box to adjust the text location. Choose the text size, font, and left and right alignment, or directly drag the text box to complete the adjustment of the text position. You can also add some stickers, Graffiti, Dates, Lines, Shapes, and Numbers.X2 printer also supports printing pictures, Excel, Code, QR code, and OCR.
• After finishing the text font settings, click Print to enter the print preview page. On the print preview page, you can add the number of copies to be printed at one time and the direction of printing, we recommend the default print direction.