Mark-10 MF100 Usb Sensor Interface User Guide

Mark-10 MF100 Usb Sensor Interface

Thank you!
Thank you for purchasing a Mark-10 MF100 USB Sensor In-terface with MESUR®Flex software. We are confident that you will get many years of service from this product.
The interface and software are designed to work with a wide range of third-party force and torque sensors. Please read through this quick start guide and the complete user’s guide before using the indicator.

IMPORTANT SAFETY CONSIDERATIONS

The MF100 and force and torque sensors are sensitive and must be treated with care. Please review the safety information provided in the user’s guide prior to operating the MF100, and be sure to read through sensor manufacturers’ instructional materials.

OVERVIEW

Model MF100 adapter interfaces a us-er-supplied force or torque sensor to a PC.
The interface may be programmed to the appropriate load capacity with a soft-ware utility through USB communication. Through MESUR®Flex software, all con-figuration and calibration information are saved within the interface.

MF100 is compatible with sensors meeting the following specifications:

• Type: Full bridge
• Resistance: 300 – 1000Ω
• Sensitivity: 1 – 3 mV/V full scale

INCLUDED ITEMS

• Qty. Model No. Description
• 1 MF100 USB sensor interface
• 1 – Strain relief for sensor cable

INSTALLING MESUR®FLEX SOFTWARE

Installation instructions may be found in the applications’ user’s guide. A download link is provided on the next page.

PC requirements
Compatible with PCs running Microsoft Windows 10 or later, with minimum monitor resolution of 1024 x 768. A USB port or USB hub is required and the Mark-10 USB Driver must be installed.

LINKS

• User’s Guide
  https://mark-10.com/manualmf100
• MESURFlex Software Download
  https://mark-10.com/mesurflex-download-form/
• Download user’s guides, data sheets, software, solid models, and more.
  mark-10.com/resources 

11 Dixon Avenue, Copiague, NY 11726 888-MARK-TEN

• Tel: 631-842-9200 www.mark-10.com
• info@mark-10.com