maono Logo

maono PD400X USB-XLR Dynamic Microphone A0

USB/XLR Podcast
Dynamic Microphone

User Manual
Packing List

maono PD400X USB-XLR Dynamic Microphone A1                                     maono PD400X USB-XLR Dynamic Microphone A2
XLR Dynamic Microphone x1             Wind Foam x1

maono PD400X USB-XLR Dynamic Microphone A3 maono PD400X USB-XLR Dynamic Microphone A4
XLR XLR Audio Cable x1            USB-C Audio Cable x1

maono PD400X USB-XLR Dynamic Microphone A5                          maono PD400X USB-XLR Dynamic Microphone A6
Desktop Stand Base x1                          User Manual x1

Product Description

Maono PD400X USB/XLR dynamic microphone offers great convenience to users who need to use it on a PC/Mac or on traditional audio equipment. The dual outputs design saves investment in gears for podcasters, streamers and other creators who prefers flexible setups. PD400x has a classic broadcast microphone look and feel, but it is packed with state-of-the-art audio technologies that supercharge the content-creating experiences. The unique 3-in-1 smart knob offers controls on microphone gain, headphone volume, and monitor mix, delivering a simple and intuitive user experience. More advanced audio processing features are available in PC/Mac Maono Link software. Software and firmware updates will bring new features and enhanced performance.

Product Features

• Cardioid polar pattern
• Monitor mix control
• Headphone volume control
• High sensitivity
• Companion software
• Mic gain control
• Tap to mute
• All metal body
• Adjustable vocal tone

Specification
Capsule type Dynamic
Polar pattern Cardioid
Audio outputs XLR and USB-C
Sampling rate 24-bit/48kHz
Frequency Response 40Hz-16kHz
Mic gain range 0 to +42dB
Sensitivity XLR: -51.2dBV/Pa
USB: -8.5dBFS/Pa (Max)
SPL >130dB SPL
Frequency Response
maono PD400X USB-XLR Dynamic Microphone A7 Polar Pattern

maono PD400X USB-XLR Dynamic Microphone A8              maono PD400X USB-XLR Dynamic Microphone A9
dB rel. 1V/Pa              (at lk Hz)

Product installation and usage
Attach the microphone to a desktop stand base

Turn the table stand base counterclockwise to install it to microphone.

maono PD400X USB-XLR Dynamic Microphone A10

Attach the microphone to a boom arm

Turn the microphone counterclockwise to install microphone to a boom arm.

maono PD400X USB-XLR Dynamic Microphone A11

Connect the microphone to computers

Connect the microphone to a computer using a USB-C cable. Connect yours headphones to the 3.5mm headphone jack on the microphone if you want to take advantages of real-time monitoring and monitor mix.

maono PD400X USB-XLR Dynamic Microphone A12

Connect the microphone to an audio interface

Connect the microphone to an audio interface with the XLR-XLR cable. Connect headphone to audio interface headphone interface if you need to use a headphone.

maono PD400X USB-XLR Dynamic Microphone A13

End-address microphone

Ensure the microphone grill faces audio source.

maono PD400X USB-XLR Dynamic Microphone A14 maono PD400X USB-XLR Dynamic Microphone A15

Product Overview

maono PD400X USB-XLR Dynamic Microphone A16

  1. XLR Dynamic Microphone
  2. Tap-to-Mute
  3. Fastener
  4. 3.5mm Headphone Jack
  5. EQ Adjustment
  6. Desktop Stand
  7. 3-in-1 Smart Knob
  8. Fastener
  9. XLR Output
  10. USB-C
Buttons functions
• Mute button
Control Operation Function Indicator
maono PD400X USB-XLR Dynamic Microphone B1 maono PD400X USB-XLR Dynamic Microphone B2Tap Mute maono PD400X USB-XLR Dynamic Microphone B3
Unmute maono PD400X USB-XLR Dynamic Microphone B4

Note: Mute and unmute feature apply to all modes.

• EQ adjustment
Control Operation Function Indicator
maono PD400X USB-XLR Dynamic Microphone B5 maono PD400X USB-XLR Dynamic Microphone B2Tap Flat maono PD400X USB-XLR Dynamic Microphone B5a
High-pass Filter maono PD400X USB-XLR Dynamic Microphone B5b
Presence Boot maono PD400X USB-XLR Dynamic Microphone B5c
HPF & Presence Boost maono PD400X USB-XLR Dynamic Microphone B5d

Note: Short press the button o switch from flat, high-pass filter, presence boot and HPF & presence boost effect.

• Smart knob

Turn the knob to adjust mic gain, headphone volume and monitor mix. Hold the knob for is to switch modes.

maono PD400X USB-XLR Dynamic Microphone B6 Mode 1: Microphone Gain

When the mic symbol on the left is lit, the smart knob will control the mic gain, and the white LED will show the current mic gain. As you turn the knob, the white LED will light up or off, showing the gain level you are setting.

Press and hold the smart knob for one second to enter headphone volume mode. The mode you will remain until you switch to another mode.

maono PD400X USB-XLR Dynamic Microphone B7 Mode 2: Headphone Volume

When the headphone symbol on the right is lit, the smart knob will control the volume of the microphone headphone volume, and the blue LED shows the current volume. When you turn the knob to adjust the headphone volume, the LED will light up, then go to the level display 3 seconds after releasing the knob.

Press and hold the smart knob for one second to enter monitor mix mode.

maono PD400X USB-XLR Dynamic Microphone B8 Mode 3: Monitor Mix

When both the microphone and headphone symbols are lit, the smart knob will be set to adjust the mix of the microphone monitoring and the computer audio in the headphones. By default, the purple light is centered and you will hear both. Turn to the right, if you want to hear more of your voice and less computer audio. Vice versa, turn to the left if you want to hear more computer audio. Turn all the way left to turn off the microphone monitoring completely.

maono PD400X USB-XLR Dynamic Microphone B9Note: When entering each adjustment mode without turning the knob, it’ will enter the microphone level display mode after 3 seconds. The indicator will display audio level in real time with green, orange and red LED lights according to the microphone level. During recording, please make sure all the green lights will be on, which indicates a normal audio capture. 7th and 8th orange LED lights indicates overloaded, 9th red lights indicates severe overloaded.

Windows Setup Guide

maono PD400X USB-XLR Dynamic Microphone C1        maono PD400X USB-XLR Dynamic Microphone B13

Microphone level setting

maono PD400X USB-XLR Dynamic Microphone C2 maono PD400X USB-XLR Dynamic Microphone C3

macOS Setup Guide

maono PD400X USB-XLR Dynamic Microphone C4

maono PD400X USB-XLR Dynamic Microphone C5

Maono Link Guide

Maono Link is available for both Windows 7 or later and macOS 10.14 or later.

To download the software, please go to https://www.maono.com

Settings are synced in real time between hardware and software.

Standard

Offers a simple and intuitve set of audio settings and tone tweaking.

maono PD400X USB-XLR Dynamic Microphone C6

Advanced

Offers more advanced audio settings. You can use a combination of EQ, limiter, and compressor to customize your voice.

You can go to the setting menu from the top right corner to check software and firmware updates.

maono PD400X USB-XLR Dynamic Microphone C7

Note: The interface and feature sets of your Maono Link Desktop App may be different since we frequently update the software to introduce new features and improve performance.

Model : PD400X

Technical support:
support@maono.com
www.maono.com

maono PD400X USB-XLR Dynamic Microphone certi

Made in China

Final clause:
Information and data contained in this manual are subject to change without notice in advance.

EC REP

Company: Qing UG (haftungsbeschrankt)
Address: Undinestr. 7,12203 Berlin Germany
Tell: 004917662179550
E-mail: pmdheinrich@gmail.com

UK Rep

Company: CET PRODUCT SERVICE LTD.
Address: Chase Business Centre, 39-41
Chase Side, London N14 5BP United Kingdom
Email: info.cetservice@gmail.com
TEL: +447419325266

V1.0_20220728

Documents / Resources

maono PD400X USB-XLR Dynamic Microphone [pdf] User Manual
PD400X, USB-XLR Dynamic Microphone, Dynamic Microphone, USB-XLR Microphone, Microphone, PD400X Microphone

References

Leave a comment

Your email address will not be published. Required fields are marked *